Gigabyte W480 VISION W Manual de usuario

To reduce the impacts on global warming, the packaging materials of this product

are recyclable and reusable. GIGABYTE works with you to protect the environment.

For more product details, please visit GIGABYTE's website.

W480 VISION W

User's Manual

Rev. 1001

12ME-W48VSW-1001R

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without

prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or

published in any form or by any means without GIGABYTE's prior written permission.

In order to assist in the use of this product, carefully read the User's Manual.

For product-related information, check on our website at: https://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV:

1.0" means the revision of the motherboard is 1.0. Check your motherboard revision before

updating motherboard BIOS, drivers, or when looking for technical information.

Example:

- 3 -

Table of Contents

W480 VISION W Motherboard Layout ............................................................................4

W480 VISION W Motherboard Block Diagram................................................................5

Chapter 1 Hardware Installation .....................................................................................6

1-1 Installation Precautions.................................................................................... 6

1-2 Product Specications...................................................................................... 7

1-3 Installing the CPU .......................................................................................... 10

1-4 Installing the Memory..................................................................................... 10

1-5 Installing an Expansion Card ......................................................................... 11

1-6 Setting up AMD CrossFire™ Conguration..................................................... 11

1-7 Back Panel Connectors.................................................................................. 12

1-8 Internal Connectors........................................................................................ 14

Chapter 2 BIOS Setup ..................................................................................................25

2-1 Startup Screen ............................................................................................... 25

2-2 The Main Menu .............................................................................................. 26

2-3 M.I.T. .............................................................................................................. 27

2-4 System ........................................................................................................... 36

2-5 Peripherals..................................................................................................... 37

2-6 Chipset........................................................................................................... 40

2-7 BIOS............................................................................................................... 42

2-8 Power............................................................................................................. 45

2-9 Save & Exit..................................................................................................... 47

Chapter 3 Appendix ......................................................................................................48

3-1 Conguring a RAID Set.................................................................................. 48

3-2 Installing an Intel®Optane™Memory.............................................................. 50

3-3 Drivers Installation.......................................................................................... 52

3-4 Debug LED Codes ......................................................................................... 53

Regulatory Notices.................................................................................................... 57

Contact Us ................................................................................................................ 60

- 4 -

W480 VISION W Motherboard Layout

Box Contents

5W480 VISION W motherboard 5Six SATA cables

5Motherboard driver disc 5One G Connector

5User's Manual 5Two thermistor cables

* The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice.

(Note) For debug code information, please refer to Chapter 3.

DUAL_

U32G2_

LAN2

LGA1200

ATX

AUDIO

DDR4_A1

DDR4_A2

DDR4_B1

DDR4_B2

BAT

Intel®W480

CLR_CMOS

M_BIOS

THB_C1

THB_C2

Intel®2.5GbE

LAN

CODEC

PCIEX16

PCIEX4_1

PCIEX1

USB30_OB

SYS_FAN3_

PUMP

DB_PORT (Note)

EC_TEMP1

SYS_FAN1

SYS_FAN2

80110

M2A_CPU

80110

M2M_SB

W480 VISION W

QFLASH_PLUS F_PANEL

F_USB1

SYS_FAN4_

PUMP

CPU_FAN

CPU_OPT

iTE®

Super I/O

ATX_12V_2X4

ATX_12V_2X2

QFLED

SATA3

5 3 1

4 2 0

KB_MS_USB20

USB_

HDMI

U32_

LAN1

PCIEX4_2

PCIEX8

CNVI

PW_SW

CMOS_SW

RST_SW

EC_TEMP2

F_U32

F_U32C

GSATA3

PMBUS

Intel®GbE

LAN

SATA3

SATA_SGP2

SATA_SGP1SPI_TPM

COMB

COMA

F_AUDIO

SATA_DOM0

SATA_DOM1

USB 3.2 Gen 1

Hub

ASMedia®

ASM1061

- 5 -

W480 VISION W Motherboard Block Diagram

2 COM ports

LGA1200 CPU

CPU CLK+/- (100~500 MHz)

DDR4 2933/2666/2400/2133 MHz

PCI Express 3.0 Bus

DMI 3.0

LAN2

RJ45

Intel®

2.5GbE LAN

LPC

Bus

Center/Subwoofer

Speaker Out

Line Out

MIC

Line In

S/PDIF Out

Rear Speaker Out

CODEC

iTE®

Super I/O

1 USB Type-C™, with

USB 3.2 Gen 2 support

Intel®W480

1 USB 3.2 Gen 2

Type A

1 PCI Express

x16

2 PCI Express

Switch

LAN1

RJ45

Intel®

GbE LAN

PCI Express 3.0 Bus

1 M.2 Socket 3 (M2A_CPU)

Switch

1 M.2 Socket 3

(M2M_SB)

6 SATA 6Gb/s

(SATA3 0~5)

PCI Express 3.0 Bus

DDI HDMI 1.4

1 PCI

Express x4

M.2 CNVi

DDI 2 DisplayPorts

Switch

1 x PCI Express x4

SPI

Bus

BIOS

TPM

3 USB 3.2 Gen 1

6 USB 2.0/1.1

ASMedia®

ASM1061

2 SATA 6Gb/s

(GSATA3 0, 1)

1 PCI

Express x1

3 USB 3.2 Gen 1

USB 3.2

Gen 1 Hub

2 SATA 6Gb/s

(SATA3 6, 7, with

SATA DOM Support)

Chapter 1 Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's

manual and follow these procedures:

•Prior to installation, make sure the chassis is suitable for the motherboard.

•Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

•When handling the motherboard, avoid touching any metal leads or connectors.

•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keep your hands dry and rst touch a metal object to eliminate static electricity.

•Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

•Before connecting or unplugging the power supply cable from the motherboard, make sure

the power supply has been turned off.

•Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

•Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

•To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Do not place the computer system on an uneven surface.

•Do not place the computer system in a high-temperature or wet environment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product, please consult a certied computer technician.

•If you use an adapter, extension power cable, or power strip, ensure to consult with its installation

and/or grounding instructions.

- 6 -

1-2 ProductSpecications

CPU LGA1200 package:

- Intel®Xeon®W series processors

10th Generation Intel

Core

™

processors/Intel

Pentium

processors/

Intel

Celeron

processors

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset Intel®W480 Express Chipset

Memory Intel®Xeon®W-1290/W-1270 series processors/Intel®Core™i9/i7 processors:

- Support for DDR4 2933/2666/2400/2133 MHz

Intel®Xeon®W-1250 series processors/Intel®Core™i5/i3/Pentium®/Celeron®

processors:

- Support for DDR4 2666/2400/2133 MHz

4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity)

of system memory

Dual channel memory architecture

Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules

* To support ECC, you must install an Intel®Xeon®processor.

Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

Support for Extreme Memory Prole (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics

Integrated Graphics Processor-Intel®HD Graphics support:

- 1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz

* Support for HDMI 1.4 version and HDCP 2.3.

- 2 x DisplayPorts, supporting a maximum resolution of 4096x2304@60 Hz

* Support for DisplayPort 1.4 version, HDCP 2.3, and HDR.

Support for up to 3 displays at the same time

Maximum shared memory of 512 MB

Audio Realtek®ALC1220-VB codec

* The back panel line out jack supports DSD audio.

High Denition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN Intel®2.5GbE LAN chip (2.5 Gbit/1 Gbit/100 Mbit)(LAN2)

Intel®GbE LAN chip (1 Gbit/100 Mbit)(LAN1)

Expansion Slots 1 x PCI Express x16 slot, running at x16 (PCIEX16)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

1 x PCI Express x16 slot, running at x8 (PCIEX8)

* The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is

populated, the PCIEX16 slot operates at up to x8 mode.

2 x PCI Express x16 slots, running at x4 (PCIEX4_1, PCIEX4_2)

* The PCIEX4_2 slot shares bandwidth with the M2M_SB connector. The PCIEX4_2

slot becomes unavailable when a device is installed in the M2M_SB connector.

1 x PCI Express x1 slot

(All of the PCI Express slots conform to PCI Express 3.0 standard.)

1 x M.2 Socket 1 connector for an Intel®CNVi wireless module only (CNVI)

Multi-Graphics

Technology Support forAMD Quad-GPU CrossFire™and 2-WayAMD CrossFire™technologies

- 7 -

Storage Interface 1 x M.2 connector (Socket 3, M key, type 2280/22110 PCIe x4/x2 SSD support)

(M2A_CPU)

1 x M.2 connector (Socket 3, M key, type 2280/22110 SATA and PCIe x4/x2

SSD support) (M2M_SB)

8 x SATA 6Gb/s connectors (SATA3 0~7)

Support for RAID 0, RAID 1, RAID 5, and RAID 10

* Refer to "1-8 Internal Connectors," for the installation notices for the M.2 and SATA

connectors.

Intel®Optane™Memory Ready

ASMedia®ASM1061 chip:

- 2 x SATA 6Gb/s connectors (GSATA3 0~1), supporting AHCI mode only

USB Chipset:

- 1 x USB Type-C™port with USB 3.2 Gen 2 support, available through the

internal USB header

- 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel

- 3 x USB 3.2 Gen 1 ports on the back panel

- 6 x USB 2.0/1.1 ports (4 ports on the back panel, 2 ports available through

the internal USB header)

Chipset+1 USB 3.2 Hub:

- 3 x USB 3.2 Gen 1 ports (1 port onboard, 2 ports available through the

internal USB header)

Internal

Connectors

1 x 24-pin ATX main power connector

1 x 8-pin ATX 12V power connector

1 x 4-pin ATX 12V power connector

1 x PMBUS (Power Information Detection) header

2 x M.2 Socket 3 connectors

10 x SATA 6Gb/s connectors

2 x SATA DOM power connectors

2 x SATA detection headers

1 x CPU fan header

1 x water cooling CPU fan header

2 x system fan headers

2 x system fan/water cooling pump headers

1 x front panel header

1 x front panel audio header

1 x USB 3.2 Gen 1 port (USB30_OB)

1 x USB Type-C™header, with USB 3.2 Gen 2 support

1 x USB 3.2 Gen 1 header

1 x USB 2.0/1.1 header

2 x Thunderbolt™add-in card connectors

1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI

2.0 module only)

2 x serial port headers

2 x temperature sensor headers

1 x power button

1 x reset button

- 8 -

Internal

Connectors

1 x Clear CMOS button

1 x Clear CMOS jumper

1 x Q-Flash Plus button

Back Panel

Connectors

1 x PS/2 keyboard/mouse port

1 x HDMI port

2 x DisplayPorts

1 x USB 3.2 Gen 2 Type-A port (red)

3 x USB 3.2 Gen 1 ports

4 x USB 2.0/1.1 ports

2 x RJ-45 ports

1 x optical S/PDIF Out connector

5 x audio jacks

I/O Controller iTE®I/O Controller Chip

Hardware

Monitor

Voltage detection

Temperature detection

Fan speed detection

Overheating warning

Fan fail warning

Fan speed control

* Whether the fan (pump) speed control function is supported will depend on the fan

(pump) you install.

BIOS 1 x 256 Mbit ash

Use of licensed AMI UEFI BIOS

PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features Support for APP Center

* Available applications in APP Center may vary by motherboard model. Supported

functions of each application may also vary depending on motherboard specications.

- @BIOS

- System Information Viewer

Support for Q-Flash Plus

Support for Q-Flash

Support for Xpress Install

Bundled

Software

Norton®Internet Security (OEM version)

cFosSpeed

Operating

System Support for Windows 10 64-bit

Form Factor ATX Form Factor; 30.5cm x 24.4cm

* GIGABYTE reserves the right to make any changes to the product specications and product-related information without

prior notice.

Please visit GIGABYTE's website

for support lists of CPU, memory

modules, SSDs, and M.2 devices.

Please visit the Support\Utility List

page on GIGABYTE's website to

download the latest version of apps.

- 9 -

1-3 Installing the CPU

Read the following guidelines before you begin to install the CPU:

•Make sure that the motherboard supports the CPU.

(Go to GIGABYTE's website for the latest CPU support list.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

CPU to prevent hardware damage.

•Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may

locate the notches on both sides of the CPU and alignment keys on the CPU socket.)

•Apply an even and thin layer of thermal grease on the surface of the CPU.

•Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage

of the CPU may occur.

•Set the CPU host frequency in accordance with the CPU specications. It is not recommended

that the system bus frequency be set beyond hardware specications since it does not meet the

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specications, please do so according to your hardware specications including the CPU, graphics

card, memory, hard drive, etc.

Installing the CPU

Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.

Do not remove the CPU socket cover before inserting the CPU. It may pop off from the load

plate automatically during the process of re-engaging the lever after you insert the CPU.

1-4 Installing the Memory

Read the following guidelines before you begin to install the memory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the same

capacity, brand, speed, and chips be used.

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.

DualChannelMemoryConguration

This motherboard provides four memory sockets and supports Dual Channel Technology. After the memory

is installed, the BIOS will automatically detect the specications and capacity of the memory. Enabling Dual

Channel memory mode will double the original memory bandwidth.

Please visit GIGABYTE's website for details on hardware installation.

- 10 -

Triangle Pin One Marking on the CPU

NotchNotch

LGA1200 CPU

Alignment KeyAlignment Key

LGA1200 CPU Socket

Pin One Corner of the CPU Socket

Otros manuales para W480 VISION W

Tabla de contenidos

Otros manuales de Placa madre de Gigabyte

Gigabyte

Gigabyte B760M D3H DDR4 Manual de usuario

Gigabyte

Gigabyte GA-8N-SLI Royal Manual de usuario

Gigabyte

Gigabyte R182-Z91 Manual de usuario

Gigabyte

Gigabyte GA-F2A75-D3H Manual de usuario

Gigabyte

Gigabyte GA-8IR533 Manual de usuario

Gigabyte

Gigabyte B450M AORUS ELITE Manual de usuario

Gigabyte

Gigabyte X570 GAMING X Manual de usuario

Gigabyte

Gigabyte GA-P55-USB3 Manual de usuario

Gigabyte

Gigabyte GA-Z77X-UP5 TH rev. 1.0 Manual de usuario

Gigabyte

Gigabyte GA-MA770-ES3 Manual de usuario

Gigabyte

Gigabyte Z490 VISION D Manual de usuario

Gigabyte

Gigabyte GA-H110TN Manual de usuario

Gigabyte

Gigabyte B550 AORUS ELITE AX Manual de usuario

Gigabyte

Gigabyte GA-8VM800M Manual de usuario

Gigabyte

Gigabyte GA-B85M-DASH Manual de usuario

Gigabyte

Gigabyte R180-F2A Manual de usuario

Gigabyte

Gigabyte GA-Z270-Phoenix Gaming Manual de usuario

Gigabyte

Gigabyte GA-EP35-DS3 Manual de usuario

Gigabyte

Gigabyte B760M H Manual de usuario

Gigabyte

Gigabyte GA-EP43T-UD3L Manual de usuario

Gigabyte

Gigabyte H310M H Manual de usuario

Gigabyte

Gigabyte R281-Z91 Manual de usuario

Gigabyte

Gigabyte GA-B75M-D3P Manual de usuario

Gigabyte

Gigabyte R112-X30 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario