Gigabyte H610 Series Manual de usuario

Actual software supported may vary by motherboard model and OS verison. The software setup

menus are for reference only.

Unique Features (H610 Series)

BIOS Update Utilities .................................................................................................... 2

1-1 Updating the BIOS with the Q-Flash Utility...............................................................2

1-2 Updating the BIOS with the @BIOS Utility ...............................................................5

1-3 Using Q-Flash Plus...................................................................................................6

APP Center ................................................................................................................... 7

2-1 EasyTune..................................................................................................................9

2-2 Fast Boot ................................................................................................................10

2-3 Ambient LED ..........................................................................................................11

2-4 Smart Backup.........................................................................................................12

2-5 System Information Viewer.....................................................................................14

- 2 -

Because BIOS ashing is potentially risky, please do it with caution. Inadequate BIOS ashing may

result in system malfunction.

1-1 Updating the BIOS with the Q-Flash Utility

A. Before You Begin

1. From GIGABYTE's website, download the latest compressed BIOS update le that matches your motherboard

model.

2. Extract the le and save the new BIOS le (e.g. H610MHD3P.F1) to your USB ash drive, or hard drive. Note:

The USB ash drive or hard drive must use FAT32/16/12 le system.

3. Restart the system. During the POST, press the <End> key to enter Q-Flash. Note: You can access Q-Flash

by either pressing the <End> key during the POST or click the Q-Flash icon (or press the <F8> key) in BIOS

Setup. However, if the BIOS update le is saved to a hard drive in RAID/AHCI mode or a hard drive attached

to an independent SATA controller, use the <End> key during the POST to access Q-Flash.

BIOS Update Utilities

GIGABYTE motherboards provide two unique BIOS update tools, Q-Flash™and @BIOS™. GIGABYTE Q-Flash

and @BIOS are easy-to-use and allow you to update the BIOS without the need to enter MS-DOS mode.

Additionally, this motherboard features the DualBIOS™ design and supports Q-Flash Plus, providing multiple

protection for the safety and stability of your computer.

What is DualBIOS™?

Motherboards that support DualBIOS have two BIOS onboard, a main BIOS and a backup BIOS. Normally, the

system works on the main BIOS. However, if the main BIOS is corrupted or damaged, the backup BIOS will

take over on the next system boot to ensure normal system operation.

What is Q-Flash Plus?

Q-Flash Plus allows you to update the BIOS when your system is off (S5 shutdown state). Save the latest BIOS

on a USB thumb drive and plug it into the dedicated port, and then you can now ash the BIOS automatically

by simply pressing the Q-Flash Plus button.

What is Q-Flash™?

With Q-Flash you can update the system BIOS without having to enter operating systems like MS-DOS or

Window rst. Embedded in the BIOS, the Q-Flash tool frees you from the hassles of going through complicated

BIOS ashing process.

What is @BIOS™?

@BIOS allows you to update the system BIOS while in the Windows environment. @BIOS will download the

latest BIOS le from the nearest @BIOS server site and update the BIOS.

- 3 -

Click Q-Flash (F8) or select the Q-Flash item on the System Info menu to access Q-Flash.

B. Updating the BIOS

In the main menu of Q-Flash, use the keyboard or mouse to select an item to execute. When updating the BIOS,

choose the location where the BIOS le is saved. The following procedure assumes that you have saved the

BIOS le to a USB ash drive.

Step 1:

1. Insert the USB ash drive containing the BIOS le into the computer. In the main screen of Q-Flash, select

Update BIOS.

•The Save BIOS option allows you to save the current BIOS le.

•Q-Flash only supports USB ash drive or hard drives using FAT32/16/12 le system.

•If the BIOS update le is saved to a hard drive in RAID/AHCI mode or a hard drive attached

to an independent SATA controller, use the <End> key during the POST to access Q-Flash.

2. Select the BIOS update le.

Make sure the BIOS update le matches your motherboard model.

- 4 -

Step 2:

The screen will show that the BIOS le is being read from your USB ash drive. Please select Fast or Intact to

begin the BIOS update. The screen will then display the update process.

Step 3:

The system will restart after the update process is complete.

•To ensure the integrity of the BIOS update, the system will shut down and restart

automatically. Then it will begin to ash the BIOS with Q-Flash.

•Do not turn off or restart the system when the system is reading/updating the BIOS.

•Do not remove the USB ash drive or hard drive when the system is updating the BIOS.

Step 4:

During the POST, press <Delete> to enter BIOS Setup. Select Load Optimized Defaults on the Save & Exit

screen and press <Enter> to load BIOS defaults. System will re-detect all peripheral devices after a BIOS update,

so we recommend that you reload BIOS defaults.

Step 5:

Select Save & Exit Setup and press <Enter>. And then select Yes to save settings to CMOS and exit BIOS

Setup. The procedure is complete after the system restarts.

Select Yes to load BIOS defaults

- 5 -

1-2 Updating the BIOS with the @BIOS Utility

A. Before You Begin

1. In Windows, close all applications and TSR

(Terminate and Stay Resident) programs. This

helps prevent unexpected failures when performing

a BIOS update.

2. If the BIOS is being updated via the Internet, ensure

the Internet connection is stable and do NOT

interrupt the Internet connection (for example, avoid

a power loss or switching off the Internet). Failure to

do so may result in a corrupted BIOS or a system

that is unable to start.

3. GIGABYTE product warranty does not cover any

BIOS damage or system failure resulting from an

inadequate BIOS ashing.

B. Using @BIOS

•Make sure that the BIOS le to be ashed matches your motherboard model. Updating the BIOS

with an incorrect BIOS le could cause your system not to boot.

•Do not turn off the system or remove the power during the BIOS update process, or the BIOS may

corrupt and the system may not boot.

If the BIOS update le for your motherboard is not present on the @BIOS server site, please

manually download the BIOS update le from GIGABYTE's website and follow the instructions in

"Update the BIOS without Using the Internet Update Function" below.

Supported image formats include jpg, bmp, and gif.

C. After Updating the BIOS

Restart your system after updating the BIOS.

1. Update the BIOS Using the Internet Update Function:

Click Update from Server, select the @BIOS server site closest to your location and

then download the BIOS le that matches your motherboard model. Follow the on-screen

instructions to complete.

2. Update the BIOS without Using the Internet Update Function:

Click Update from File, then select the location where you save the BIOS update le obtained

from the Internet or through other source. Follow the on-screen instructions to complete.

3. Save the Current BIOS File:

Click Save to File to save the current BIOS le.

4. Change the Boot-up Logo:

Click Upload new image in Face-Wizard and you will be able to change the boot-up logo

with your own picture, creating a personalized boot-up screen. Click Backup current image

to save the current boot-up logo.

- 6 -

1-3 Using Q-Flash Plus

A. Before You Begin

1. From GIGABYTE's website, download the latest compressed BIOS update le that matches your motherboard

model.

2. Uncompress the downloaded BIOS le, save it to your USB ash drive, and rename it to GIGABYTE.bin.

(Note: The USB ash drive must use the FAT32 le system.)

3. Connect the power cables to the 12V power connector (connect either one if there are two) and main power

connector.

4. Please turn on the power supply before connecting the USB ash drive to the Q-Flash Plus port on the

back panel.

B. Using Q-Flash Plus

Press the Q-Flash Plus button and the system will automatically search and match the BIOS le in the USB

ash drive on the Q-Flash Plus port. The QFLED and the Q-Flash Plus button on the rear panel will ash during

the BIOS matching and ashing process. Wait for 6-8 minutes and the LEDs will stop ashing when the BIOS

ashing is complete.

•If you choose to update the BIOS manually, rst make sure that your system is off (S5 shutdown

state).

•If your motherboard has a BIOS switch and a SB switch, reset them to their default settings.

(Default setting for the BIOS switch: Boot from the main BIOS; default setting for the SB switch:

Dual BIOS)

•On motherboards with DualBIOS™, the DualBIOS™feature will continue to update the backup

BIOS after the main BIOS has been ashed and the system restarts. After completion, the system

will reboot again and boot from the main BIOS.

- 7 -

APP Center

GIGABYTE App Center gives you easy access to a wealth of GIGABYTE apps that help you get the most from

your GIGABYTE motherboard (Note). Using a simple, unied user interface, GIGABYTE App Center allows you

to easily launch all GIGABYTE apps installed on your system, check related updates online, and download the

apps, drivers, and BIOS.

Drivers Installation

After you install the operating system, a dialog box will appear on the bottom-right corner of the desktop asking

if you want to download and install the drivers and GIGABYTE applications via APP Center. Click Install to

proceed with the installation. (In BIOS Setup, make sure Settings\IO Ports\APP Center Download & Install

Conguration\APP Center Download & Install is set to Enabled.)

(Note) Available applications in APP Center may differ by motherboard model. Supported functions of each

application may also vary depending on motherboard specications.

Before the installation, make sure the system is connected to the Internet.

When the End User License Agreement dialog box appears, press <Accept> to install APP Center. On the APP

Center screen, select the drivers and applications you want to install and click Install.

- 8 -

Running the APP Center

In Desktop mode, click the App Center icon in the notication area to launch the App Center utility (Figure 1).

On the main menu, you can select an app to run or click LiveUpdate to update an app online.

If the App Center is closed, you can restart it by clicking Launch App Center on the Start menu (Figure 2).

Figure 2

Figure 1

- 9 -

2-1 EasyTune

GIGABYTE's EasyTune is a simple and easy-to-use interface that allows users to ne-tune their system settings

or do overclock/overvoltage in Windows environment.

The EasyTune Interface

Tabs Information

Tab Description

The Smart Boost tab provides you with different levels of CPU frequency to choose to

achieve desired system performance. After making changes, be sure to restart your system

for these changes to take effect.

The Advanced CPU OC tab allows you to set CPU base clock, frequency, and voltages,

and integrated graphics frequency. You can save the current settings to a prole. You can

create up to 2 proles.

The Advanced DDR OC tab allows you to set the memory clock.

The Advanced Power tab allows you to adjust voltages.

The HotKey tab allows you to set hotkeys for your proles.

Incorrectly doing overclock/overvoltage may result in damage to the hardware components such

as CPU, chipset, and memory and reduce the useful life of these components. Before you do the

overclock/overvoltage, make sure that you fully know each function of EasyTune, or system instability

or other unexpected results may occur.

Available functions in EasyTune may vary by motherboard model and CPU. Grayed-out area(s)

indicates that the item is not congurable or the function is not supported.

- 10 -

(Note) For more details about this function, refer to Chapter 2, "BIOS Setup."

2-2 Fast Boot

Through the simple GIGABYTE Fast Boot interface, you can enable or change the Fast Boot or Next Boot

After AC Power Loss setting right in the operating system.

The Fast Boot Interface

Using Fast Boot

•BIOS Fast Boot:

This option is the same as the Fast Boot option (Note) in BIOS Setup. It allows you to enable or disable the

fast boot function to shorten OS boot time.

•Next Boot After AC Power Loss:

This option is the same as the Next Boot After AC Power Loss option (Note) in BIOS Setup. It allows you to

select the system bootup mode upon the return of an AC power loss. (This mode is congurable only when

BIOS Fast Boot is set to Enabled or Ultra Fast.)

After you congure the settings, click Save to save and click Exit. The settings will take effect on next boot. If

you click the Enter BIOS Setup Now button, the system will restart and enter BIOS Setup immediately.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de Gigabyte

Gigabyte

Gigabyte GA-6VXE Manual de usuario

Gigabyte

Gigabyte GA-B560M-D3P Manual de usuario

Gigabyte

Gigabyte GA-8GEM667 Series Manual de usuario

Gigabyte

Gigabyte GA-6VXE+ Manual de usuario

Gigabyte

Gigabyte GA-MA770-DS3P Manual de usuario

Gigabyte

Gigabyte GA-8I915G Duo Manual de usuario

Gigabyte

Gigabyte B360M D3V Manual de usuario

Gigabyte

Gigabyte 7VT600-RZ Manual de usuario

Gigabyte

Gigabyte GA-M55plus-S3G Manual

Gigabyte

Gigabyte X670E AORUS XTREME Manual de usuario

Gigabyte

Gigabyte GA-F2A78M-D3H Manual de usuario

Gigabyte

Gigabyte GA-H81M-HD3 Manual de usuario

Gigabyte

Gigabyte GA-EP41T-USB3 Manual de usuario

Gigabyte

Gigabyte GA-B150M-DS3P Manual de usuario

Gigabyte

Gigabyte GA-M68M-S2P Manual de usuario

Gigabyte

Gigabyte GA-K8NF-9 Manual de usuario

Gigabyte

Gigabyte GA-EP43-DS3 Manual de usuario

Gigabyte

Gigabyte X570S UD Manual de usuario

Gigabyte

Gigabyte H610M S2 DDR4 Manual de usuario

Gigabyte

Gigabyte GA-990FXA-D3 Manual de usuario

Gigabyte

Gigabyte GA-8I915G-ZFD Manual de usuario

Gigabyte

Gigabyte GA-6IWFE Manual de usuario

Gigabyte

Gigabyte GA-H61MA-D3V Manual de usuario

Gigabyte

Gigabyte A520I AC Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario