Gigabyte GA-Z170XP-SLI Manual de usuario

To reduce the impacts on global warming, the packaging materials of this product are

recyclable and reusable. GIGABYTE works with you to protect the environment.

For more product details, please visit GIGABYTE's website.

GA-Z170XP-SLI

User's Manual

Rev. 1001

12ME-Z17XPSL-1001R

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without prior notice.

No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or

by any means without GIGABYTE's prior written permission.

For quick set-up of the product, read the Quick Installation Guide included with the product.

In order to assist in the use of this product, carefully read the User's Manual.

For product-related information, check on our website at: http://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0" means

the revision of the motherboard is 1.0. Check your motherboard revision before updating motherboard

BIOS, drivers, or when looking for technical information.

Example:

Motherboard

GA-Z170XP-SLI

Jul. 16, 2015

Motherboard

GA-Z170XP-SLI

- 3 -

Table of Contents

GA-Z170XP-SLI Motherboard Layout .............................................................................4

Chapter 1 Hardware Installation .....................................................................................5

1-1 Installation Precautions.................................................................................... 5

1-2 ProductSpecications...................................................................................... 6

1-3 Installing the CPU and CPU Cooler ................................................................. 9

1-4 Installing the Memory....................................................................................... 9

1-5 Installing an Expansion Card ......................................................................... 10

1-6 Setting up AMD CrossFire™/NVIDIA®SLI™Conguration .............................. 10

1-7 Back Panel Connectors.................................................................................. 11

1-8 Internal Connectors........................................................................................ 13

Chapter 2 BIOS Setup ..................................................................................................21

2-1 Startup Screen ............................................................................................... 21

2-2 M.I.T. .............................................................................................................. 22

2-3 System Information ........................................................................................ 28

2-4 BIOS Features ............................................................................................... 29

2-5 Peripherals..................................................................................................... 32

2-6 Chipset........................................................................................................... 34

2-7 Power Management....................................................................................... 35

2-8 Save & Exit..................................................................................................... 37

Chapter 3 Appendix ......................................................................................................38

3-1 ConguringaRAIDSet.................................................................................. 38

3-2 Drivers Installation.......................................................................................... 40

RegulatoryStatements.............................................................................................. 41

Contact Us ................................................................................................................ 44

ASMedia®

ASM1142

- 4 -

GA-Z170XP-SLI Motherboard Layout

The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice.

Box Contents

5GA-Z170XP-SLI motherboard 5Four SATA cables

5Motherboard driver disk 5I/O Shield

5User's Manual 5One 2-Way SLI bridge connector

5Quick Installation Guide 5One G Connector

KB_MS_USB CPU_FAN

ATX_12V_2X4

ATX

F_AUDIO

AUDIO

B_BIOS

PCIEX8

DDR4_2

DDR4_1

DDR4_4

DDR4_3

BAT

F_PANELCOMA

Intel®Z170

PCI2

CLR_CMOS

CODEC M_BIOS

PCIEX16

SPDIF_O F_USB1

LGA1151

GA-Z170XP-SLI

VGA

DVI

HDMI

R_USB30

USB30_LAN

SATAEXPRESS

PCI1

F_USB30_2

PCIEX1_2

SYS_FAN3

SATA3

iTE®

Super I/O

SYS_FAN2F_USB2LPT

SYS_FAN1

PCIe to

PCI Bridge

TPM

M2A_32G

Intel®

GbE LAN

PCIEX4

SATA3 3 2

CPU_OPT

TYPEC

5 4

1 0

SATAEXPRESS

F_USB30_1

THB_C

PCIEX1_1

80A

60A

42A

Chapter 1 Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's

manual and follow these procedures:

•Prior to installation, make sure the chassis is suitable for the motherboard.

•Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

•When handling the motherboard, avoid touching any metal leads or connectors.

•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

•Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

•Before connecting or unplugging the power supply cable from the motherboard, make sure

the power supply has been turned off.

•Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

•Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

•To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Do not place the computer system on an uneven surface.

•Do not place the computer system in a high-temperature or wet environment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

•If you use an adapter, extension power cable, or power strip, ensure to consult with its installation

and/or grounding instructions.

- 5 -

1-2 ProductSpecications

CPU Support for Intel®Core™i7 processors/Intel®Core™i5 processors/

Intel®Core™i3 processors/Intel®Pentium®processors/

Intel®Celeron®processors in the LGA1151 package

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset Intel®Z170 Express Chipset

Memory 4xDDR4DIMMsocketssupportingupto64GBofsystemmemory

* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical

memory is installed, the actual memory size displayed will be less than the size of

the physical memory installed.

Dual channel memory architecture

SupportforDDR42133MHzmemorymodules

SupportforECCUDIMM1Rx8/2Rx8memorymodules(operateinnon-ECCmode)

Supportfornon-ECCUDIMM1Rx8/2Rx8/1Rx16memorymodules

SupportforExtremeMemoryProle(XMP)memorymodules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics

Integrated Graphics Processor- Intel®HD Graphics support:

- 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz

- 1 x DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz

* The DVI-D port does not support D-Sub connection by adapter.

1 x HDMI port, supporting a maximum resolution of 4096x2160@24 Hz

* Support for HDMI 1.4 version.

- Support for up to 3 displays at the same time

- Maximum shared memory of 512 MB

Audio Realtek®ALC1150 codec

HighDenitionAudio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN Intel®GbE LAN chip (10/100/1000 Mbit)

Expansion Slots 1 x PCI Express x16 slot, running at x16 (PCIEX16)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

1 x PCI Express x16 slot, running at x8 (PCIEX8)

* The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot

is populated, the PCIEX16 slot will operate at up to x8 mode.

1 x PCI Express x16 slot, running at x4 (PCIEX4)

* The PCIEX4 slot shares bandwidth with the PCIEX1_2 slot. When the PCIEX1_2

slot is populated, the PCIEX4 slot will operate at up to x1 mode.

2 x PCI Express x1 slots

(All of the PCI Express slots conform to PCI Express 3.0 standard.)

2 x PCI slots

Multi-Graphics

Technology Support for 3-Way/2-Way AMD CrossFire™and 2-Way NVIDIA®SLI™Technology

- 6 -

Storage Interface Chipset:

- 1 x M.2 Socket 3 connector

- 3 x SATA Express connectors

- 6 x SATA 6Gb/s connectors

 - SupportforRAID0,RAID1,RAID5,andRAID10

 * Referto"1-8InternalConnectors,"forthesupportedcongurationswiththeM.2,

SATA Express, and SATA connectors.

USB Chipset:

- 7 x USB 3.0/2.0 ports (3 ports on the back panel, 4 ports available through

the internal USB headers)

- 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through

the internal USB headers)

Chipset+ASMedia®ASM1142 chip:

- 1 x USB Type-C™port on the back panel, with USB 3.1 support

- 1 x USB 3.1 port on the back panel

Internal

Connectors

1 x 24-pin ATX main power connector

1 x 8-pin ATX 12V power connector

1 x M.2 Socket 3 connector

3 x SATA Express connectors

6 x SATA 6Gb/s connectors

1 x CPU fan header

1 x water cooling fan header (CPU_OPT)

3 x system fan headers

1 x front panel header

1 x front panel audio header

1 x S/PDIF Out header

2 x USB 3.0/2.0 headers

2 x USB 2.0/1.1 headers

1 x Trusted Platform Module (TPM) header

1 x Thunderbolt™add-in card connector

1 x serial port header

1 x parallel port header

1 x Clear CMOS jumper

Back Panel

Connectors

1 x PS/2 keyboard/mouse port

1 x D-Sub port

1 x DVI-D port

1 x HDMI port

1 x USB Type-C™port, with USB 3.1 support

1 x USB 3.1 port

3 x USB 3.0/2.0 ports

2 x USB 2.0/1.1 ports

1xRJ-45port

6xaudiojacks(Center/SubwooferSpeakerOut,RearSpeakerOut,SideSpeaker

Out, Line In, Line Out, Mic In)

I/O Controller iTE®I/O Controller Chip

- 7 -

Hardware

Monitor

System voltage detection

CPU/System temperature detection

CPU/CPU OPT/System fan speed detection

CPU/System overheating warning

CPU/CPU OPT/System fan fail warning

CPU/CPU OPT/System fan speed control

* Whether the fan speed control function is supported will depend on the cooler you

install.

BIOS 2x64Mbitash

Use of licensed AMI UEFI BIOS

Support for DualBIOS™

PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features Support for APP Center

* Available applications in APP Center may vary by motherboard model. Supported

functionsofeachapplicationmayalsovarydependingonmotherboardspecications.

- 3D OSD

- @BIOS

- Ambient LED

- AutoGreen

- Cloud Station

- EasyTune

- EasyRAID

- Fast Boot

- Smart TimeLock

- Smart Keyboard

- Smart Backup

- System Information Viewer

- USB Blocker

Support for Q-Flash

Support for Smart Switch

Support for Xpress Install

Bundled

Software

Norton®Internet Security (OEM version)

Intel®SmartResponseTechnology

cFosSpeed

Operating

System Support for Windows 10/8.1/7

Form Factor ATX Form Factor; 30.5cm x 22.5cm

* GIGABYTEreservestherighttomakeanychangestotheproductspecicationsandproduct-relatedinformationwithout

prior notice.

Please visit GIGABYTE's website for support lists of CPU, memory modules, SSDs, and M.2

devices.

Please visit the Support & Downloads\Utility page on GIGABYTE's website to download

the latest version of apps.

- 8 -

1-3 Installing the CPU and CPU Cooler

ReadthefollowingguidelinesbeforeyoubegintoinstalltheCPU:

•Make sure that the motherboard supports the CPU.

(Go to GIGABYTE's website for the latest CPU support list.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

CPU to prevent hardware damage.

•Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may

locate the notches on both sides of the CPU and alignment keys on the CPU socket.)

•Apply an even and thin layer of thermal grease on the surface of the CPU.

•Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage

of the CPU may occur.

•SettheCPUhostfrequencyinaccordancewiththeCPUspecications.Itisnotrecommended

thatthesystembusfrequencybesetbeyondhardwarespecicationssinceitdoesnotmeetthe

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specications,pleasedosoaccordingtoyourhardwarespecicationsincludingtheCPU,graphics

card, memory, hard drive, etc.

Installing the CPU

Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.

Do not remove the CPU socket cover before inserting the CPU. It may pop off from the load

plate automatically during the process of re-engaging the lever after you insert the CPU.

1-4 Installing the Memory

Readthefollowingguidelinesbeforeyoubegintoinstallthememory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the same

capacity, brand, speed, and chips be used.

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.

Alignment

Key

Alignment

Key

LGA1151 CPU Socket

Pin One Corner of the CPU Socket

DualChannelMemoryConguration

This motherboard provides four memory sockets and supports Dual Channel Technology. After the memory

isinstalled,theBIOSwillautomaticallydetectthespecicationsandcapacityofthememory.EnablingDual

Channel memory mode will double the original memory bandwidth.

LGA1151 CPU

Triangle Pin One Marking on the CPU

Notch

Please visit GIGABYTE's website for details on hardware installation.

- 9 -

1-5 Installing an Expansion Card

Readthefollowingguidelinesbeforeyoubegintoinstallanexpansioncard:

•Make sure the motherboard supports the expansion card. Carefully read the manual that came

with your expansion card.

•Always turn off the computer and unplug the power cord from the power outlet before installing an

expansion card to prevent hardware damage.

B. Connecting the Graphics Cards

Step 1:

Observethestepsin"1-5InstallinganExpansionCard"andinstallCrossFire/SLIgraphicscardsonthePCI

Express x16 slots.

Step 2:

Insert the CrossFire(Note)/SLI bridge connectors in the CrossFire/SLI gold edge connectors on top of the cards.

Step 3:

Plug the display cable into the graphics card on the PCIEX16 slot.

1-6 Setting up AMD CrossFire™/NVIDIA®SLI™Conguration

A. System Requirements

-Windows 10/8.1/7 operating system

-A CrossFire/SLI-supported motherboard with two or more PCI Express x16 slots and correct driver

-CrossFire/SLI-ready graphics cards of identical brand and chip and correct driver

 (CurrentGPUsthatsupport3-WayCrossFiretechnologyincludetheATIRadeon™HD 3800, HD 4800, HD

5800series,andAMDRadeon™HD 6800, HD 6900, HD 7800, and HD 7900 series. For the latest GPU

support information, please refer to the AMD website.)

-CrossFire(Note)/SLI bridge connectors

-Apowersupplywithsufcientpowerisrecommended(Refertothemanualofyourgraphicscardsforthe

power requirement)

(Note) The bridge connector(s) may be needed or not depending on your graphics cards.

Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.

1. Dual Channel mode cannot be enabled if only one memory module is installed.

2. When enabling Dual Channel mode with two or four memory modules, it is recommended that memory

of the same capacity, brand, speed, and chips be used and installed in the same colored sockets.

ThefourDDR4memorysocketsaredividedintotwochannelsandeachchannelhastwomemorysocketsas

following:

ChannelA:DDR4_2,DDR4_4

ChannelB:DDR4_1,DDR4_3

DualChannelMemoryCongurationsTable

DDR4_4 DDR4_2 DDR4_3 DDR4_1

2 Modules - - DS/SS - - DS/SS

DS/SS - - DS/SS - -

4 Modules DS/SS DS/SS DS/SS DS/SS

(SS=Single-Sided,DS=Double-Sided,"--"=NoMemory)

C.ConguringtheGraphicsCardDriver

C-1. To Enable CrossFire Function

After installing the graphics card driver in the operating system, go to the AMD Catalyst Control Center. Browse

to Performance\AMD CrossFireX™and ensure the Enable AMD CrossFireX check box is selected. If your

system has more than two CrossFire cards, select the GPU combination you want to use and click Apply.

(Available combination options are dependent on the number of graphics cards.)

- 10 -

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de Gigabyte

Gigabyte

Gigabyte GA-965P-DQ6 Manual de usuario

Gigabyte

Gigabyte GA-B75M-S Manual de usuario

Gigabyte

Gigabyte G481-HA0 Manual de usuario

Gigabyte

Gigabyte GA-F2A78M-DASHV Manual de usuario

Gigabyte

Gigabyte GS-R12P4E Manual de usuario

Gigabyte

Gigabyte GA-X58A-OC Manual de usuario

Gigabyte

Gigabyte GA-K8N51PVMT-9-RH Manual de usuario

Gigabyte

Gigabyte GA-G41MT-ES2L Manual de usuario

Gigabyte

Gigabyte B450M GAMING Manual de usuario

Gigabyte

Gigabyte GA-N3160N-D2H Manual de usuario

Gigabyte

Gigabyte GA-7A8DRL Manual de usuario

Gigabyte

Gigabyte GA-SINXP1394 Manual de usuario

Gigabyte

Gigabyte GA-Q87M-MK Manual de usuario

Gigabyte

Gigabyte GA-5DXSL-RH Manual de usuario

Gigabyte

Gigabyte GA-Z87M-D3HP Manual de usuario

Gigabyte

Gigabyte MS33-CP0 Manual de usuario

Gigabyte

Gigabyte GA-EX38-DQ6 Manual de usuario

Gigabyte

Gigabyte B650M AORUS PRO AX Manual de usuario

Gigabyte

Gigabyte TRX40 DESIGNARE Manual de usuario

Gigabyte

Gigabyte GA-7VM400A-FA Manual de usuario

Gigabyte

Gigabyte GS-R22PHE Manual de usuario

Gigabyte

Gigabyte MD61-SC2 Manual de usuario

Gigabyte

Gigabyte G1.Sniper2 Manual de usuario

Gigabyte

Gigabyte GA-M51GM-S2G Manual

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario