Gigabyte GA-IMB310N Manual de usuario

To reduce the impacts on global warming, the packaging materials of this product

are recyclable and reusable. GIGABYTE works with you to protect the environment.

For more product details, please visit GIGABYTE's website.

GA-IMB310N

User's Manual

Rev. 1001

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without prior notice.

No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or

by any means without GIGABYTE's prior written permission.

In order to assist in the use of this product, carefully read the User's Manual.

For product-related information, check on our website at: https://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0" means

the revision of the motherboard is 1.0. Check your motherboard revision before updating motherboard

BIOS, drivers, or when looking for technical information.

Example:

Motherboard

GA-IMB310N

Dec. 21, 2018

Motherboard

GA-IMB310N

- 3 -

Table of Contents

GA-IMB310N Motherboard Layout..................................................................................4

Chapter 1 Hardware Installation .....................................................................................5

1-1 Installation Precautions.................................................................................... 5

1-2 ProductSpecications...................................................................................... 6

1-3 Installing the CPU ............................................................................................ 9

1-4 Installing the Memory....................................................................................... 9

1-5 Installing an Expansion Card ......................................................................... 10

1-6 Back Panel Connectors.................................................................................. 10

1-7 Internal Connectors........................................................................................ 12

Chapter 2 BIOS Setup ..................................................................................................22

2-1 Main ............................................................................................................... 22

2-2 M.I.T. .............................................................................................................. 23

2-4 System ........................................................................................................... 28

2-5 BIOS............................................................................................................... 29

2-6 Peripherals..................................................................................................... 32

2-7 Chipset........................................................................................................... 35

2-8 Power............................................................................................................. 36

2-9 Save & Exit..................................................................................................... 38

Chapter 3 Appendix ......................................................................................................39

Drivers Installation..................................................................................................... 39

Regulatory Statements.............................................................................................. 40

Contact Us ................................................................................................................ 42

- 4 -

GA-IMB310N Motherboard Layout

* The box contents above are for reference only and the actual items shall depend on the product package you

obtain. The box contents are subject to change without notice.

Box Contents

5GA-IMB310N motherboard 5One COM port cable

5Motherboard driver disk 5Two SATA cables

5User's Manual 5I/O Shield

COMD

COMC

ATX_12V

8060

30 CPU_FAN

LGA1151

LVDS

COMD_PWCOMC_PW

COMA_PW

COMB_PW

BAT

PCIEX16

Intel®H310

M_BIOS

SYS_FAN

GA-IMB310N

AUDIO

LCD_VCC

COMA

ATX

CNVI

U_SIM (Note 1)

M.2 (Note 1)

SATA3 3 1

2 0

FPD

F_PANEL

MSATA_PCIE

DP_HDMI

F_AUDIO

CODEC

SPKR

BAT_CON

Intel®

GbE LAN

Intel®

GbE LAN

iTE®

Super I/O (Note 1)

F_USB

GPIO

TPM IC

DDR4_2

DDR4_1

SPEAKER

COMB

USB30_LAN1

USB30_LAN2

VGA

HDMI (Note 2)

BL_SW

MON_SW

CLR_CMOS

I2C

SMBUS

AT_ATX

BOOT STB

(Note 1) This chip/connector is on the back of the motherboard.

(Note 2) Whether this feature is supported depends on the product being received.

Chapter 1 Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's

manual and follow these procedures:

•Prior to installation, make sure the chassis is suitable for the motherboard.

•Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

•When handling the motherboard, avoid touching any metal leads or connectors.

•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

•Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

•Before connecting or unplugging the power supply cable from the motherboard, make sure

the power supply has been turned off.

•Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

•Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

•To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Do not place the computer system on an uneven surface.

•Do not place the computer system in a high-temperature or wet environment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

•If you use an adapter, extension power cable, or power strip, ensure to consult with its installation

and/or grounding instructions.

- 5 -

1-2 ProductSpecications

CPU Support for 9th and 8th Generation Intel®Core™i9 processors/Intel®Core™i7

processors/Intel®Core™i5 processors/Intel®Core™i3 processors/Intel®Pentium®

processors/Intel®Celeron®processors in the LGA1151 package

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset Intel®H310 Express Chipset

Memory 2 x DDR4 SO-DIMM sockets supporting up to 32 GB of system memory

Support for DDR4 2400/2133 MHz memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics

Integrated Graphics Processor-Intel®HD Graphics support:

- 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz

- 1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz (Note)

* Support for HDMI 1.4 version and HDCP 2.2.

- 1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz

* Support for HDMI 2.0 version, HDCP 2.2, and HDR.

- 1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz

* Support for DisplayPort 1.2 version, HDCP 2.2, and HDR.

Support for up to 2 displays at the same time

Maximum shared memory of 1 GB

Audio Realtek®ALC887 codec

HighDenitionAudio

2/4/5.1-channel

LAN 2 x Intel®GbE LAN chips (10/100/1000 Mbit)

TPM Inneonchip,supportingTPM2.0

Expansion Slots 1 x PCI Express x16 slot, running at x16 (PCIEX16)

(The PCIEX16 slot conforms to PCI Express 3.0 standard.)

1 x M.2 Socket 1 connector for an Intel®CNVi or PCIe wireless module (CNVI)

1 x full size Mini PCIe connector (MSATA_PCIE)

* The MSATA_PCIE slot shares bandwidth with the SATA3 2 connector. When an

MSATA SSD is populated, the SATA3 2 connector becomes unavailable.

* The MSATA_PCIE connector can also be used as an MSATA connector.

(The Mini PCI Express slot conforms to PCI Express 2.0 standard.)

Storage Interface Chipset:

- 1 x M.2 connector on the back of the motherboard (Socket 3, M key, type

2260/2280 SATA and PCIe x2 SSD support)

- 4 x SATA 6Gb/s connectors

* Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA

connectors.

(Note) Whether this feature is supported depends on the product being received.

- 6 -

USB Chipset:

- 4 x USB 3.0/2.0 ports on the back panel

- 2 x USB 2.0/1.1 ports available through the internal USB headers

Internal

Connectors

1 x 24-pin ATX main power connector

1 x 4-pin ATX 12V power connector

1 x CPU fan header

1 x system fan header

1 x M.2 Socket 3 connector on the back of the motherboard

4 x SATA 6Gb/s connectors

1 x MSATA connector

1 x USIM connector on the back of the motherboard

1 x front panel header

1 x front panel audio header

1 x battery power cable connector

1 x USB 2.0/1.1 header

2 x serial port headers

4 x serial port power select jumpers

1 x AT/ATX mode switch jumper (AT_ATX)

1 x GPIO header

1 x LVDS header

1 x LVDS drive voltage jumper (LCD_VCC)

1 x backlight switch header (BL_SW)

1xatpaneldisplayswitchheader(MON_SW)

1xatpaneldisplayheader(FPD)

1 x speaker header (SPKR)

1 x buzzer header (SPEAKER)

1 x Clear CMOS jumper

1 x chassis intrusion header

1 x I2C jumper

1 x SMBUS jumper

Back Panel

Connectors

2 x serial ports

4 x USB 3.0/2.0 ports

2 x RJ-45 ports

1 x D-Sub port

2 x HDMI ports (Note)

1 x DisplayPort

2 x audio jacks

I/O Controller iTE®I/O Controller Chip

(Note) Whether this feature is supported depends on the product being received.

- 7 -

Hardware

Monitor

Voltage detection

Temperature detection

Fan speed detection

Overheating warning

Fan fail warning

Fan speed control

* Whether the fan speed control function is supported will depend on the cooler you

install.

BIOS 1x128Mbitash

Use of licensed AMI UEFI BIOS

PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features Support for @BIOS

Support for Q-Flash

Bundled

Software Norton®Internet Security (OEM version)

Operating

System Support for Windows 10 64-bit

Form Factor Mini-ITX Form Factor; 17.0cm x 17.0cm

* GIGABYTEreservestherighttomakeanychangestotheproductspecicationsandproduct-relatedinformationwithout

prior notice.

Please visit GIGABYTE's website

for support lists of CPU, memory

modules, SSDs, and M.2 devices.

Please visit the Support\Utility List

page on GIGABYTE's website to

download the latest version of apps.

- 8 -

1-3 Installing the CPU

Read the following guidelines before you begin to install the CPU:

•Make sure that the motherboard supports the CPU.

(Go to GIGABYTE's website for the latest CPU support list.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

CPU to prevent hardware damage.

•Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may

locate the notches on both sides of the CPU and alignment keys on the CPU socket.)

•Apply an even and thin layer of thermal grease on the surface of the CPU.

•Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage

of the CPU may occur.

•SettheCPUhostfrequencyinaccordancewiththeCPUspecications.Itisnotrecommended

thatthesystembusfrequencybesetbeyondhardwarespecicationssinceitdoesnotmeetthe

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specications,pleasedosoaccordingtoyourhardwarespecicationsincludingtheCPU,graphics

card, memory, hard drive, etc.

Installing the CPU

Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.

Do not remove the CPU socket cover before inserting the CPU. It may pop off from the load

plate automatically during the process of re-engaging the lever after you insert the CPU.

Alignment

Key

Alignment

Key

LGA1151 CPU Socket

Pin One Corner of the CPU Socket

LGA1151 CPU

Triangle Pin One Marking on the CPU

Notch

Please visit GIGABYTE's website for details on hardware installation.

1-4 Installing the Memory

Read the following guidelines before you begin to install the memory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the same

capacity, brand, speed, and chips be used.

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.

- 9 -

1-5 Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:

•Make sure the motherboard supports the expansion card. Carefully read the manual that came

with your expansion card.

•Always turn off the computer and unplug the power cord from the power outlet before installing an

expansion card to prevent hardware damage.

1-6 Back Panel Connectors

Serial Port

Use the serial port to connect devices such as a mouse, modem or other peripherals.

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs.

Activity LED:Connection/Speed LED:

State Description

Orange 1 Gbps data rate

Green 100 Mbps data rate

Off 10 Mbps data rate

State Description

Blinking Data transmission or receiving is occurring

On No data transmission or receiving is occurring

USB 3.0/2.0 Port

TheUSB3.0/2.0portsupportstheUSB3.0specicationandiscompatibletotheUSB2.0specication.

Use this port for USB devices.

D-Sub Port

The D-Sub port supports a 15-pin D-Sub connector and supports a maximum resolution of 1920x1200@60 Hz

(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports

D-Sub connection to this port.

HDMI Port (Note)

The HDMI port is HDCP compliant and supports Dolby TrueHD and DTS HD

Master Audio formats. It also supports up to 192KHz/24bit 8-channel LPCM

audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported

resolution is 4096x2160@30 Hz, but the actual resolutions supported are dependent on the monitor

being used.

(Note) Whether this feature is supported depends on the product being received.

Activity LED

Connection/

Speed LED

LAN Port

- 10 -

Tabla de contenidos

Otros manuales de Placa madre de Gigabyte

Gigabyte

Gigabyte C246N-WU2 Manual de usuario

Gigabyte

Gigabyte R281-2O0 Manual de usuario

Gigabyte

Gigabyte B760M D2H Manual de usuario

Gigabyte

Gigabyte B660M AORUS ELITE AX DDR4 Manual de usuario

Gigabyte

Gigabyte B450M GAMING Manual de usuario

Gigabyte

Gigabyte GA-Z270X Manual de usuario

Gigabyte

Gigabyte GA-J1800N-D2PH Manual de usuario

Gigabyte

Gigabyte Z790 UD AX Manual de usuario

Gigabyte

Gigabyte 8VM533M-RZ Manual de usuario

Gigabyte

Gigabyte GA-K8N51PVM9-RH Manual de usuario

Gigabyte

Gigabyte GA-8PE667 Pro Manual de usuario

Gigabyte

Gigabyte X670 AORUS ELITE AX Manual de usuario

Gigabyte

Gigabyte GA-E6010N Manual de usuario

Gigabyte

Gigabyte Z490 UD AC Manual de usuario

Gigabyte

Gigabyte GA-B250-FinTech Manual de usuario

Gigabyte

Gigabyte GA-6WMZ7 Manual de usuario

Gigabyte

Gigabyte Z790I AORUS ULTRA Manual de usuario

Gigabyte

Gigabyte GA-6VTXE Manual de usuario

Gigabyte

Gigabyte G1.Guerrilla Manual de usuario

Gigabyte

Gigabyte GA-Z77-HD3 Manual de usuario

Gigabyte

Gigabyte GA-J3355N-D2P Manual de usuario

Gigabyte

Gigabyte GA-970A-UD3P Manual de usuario

Gigabyte

Gigabyte GA-Z170X-Gaming 7 Manual de usuario

Gigabyte

Gigabyte G1.Sniper 5 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario