Gigabyte GA-EG45M-DS2H Instrucciones de montaje

- 1 -

Table of Contents

TPM Configuration Procedure .......................................................................................2

1. Configuring the System BIOS .................................................................................... 2

2. Installing the Infineon TPM Driver and the GIGABYTE Ultra TPM Utility .................. 3

3. Initializing the TPM Chip ............................................................................................. 4

3.1. Easy Mode......................................................................................................................... 4

3.2. Advanced Mode ................................................................................................................ 6

4. Configuring the GIGABYTE Ultra TPM Utility .......................................................... 16

- 2 -

TPM Configuration Procedure

To enable the TPM, follow the steps below in sequence:

1. Configuring the system BIOS

2. Installing the Infineon TPM driver and the GIGABYTE Ultra TPM utility

3. Initializing the TPM chip

4. Configuring the GIGABYTE Ultra TPM utility

1. Configuring the System BIOS

To use the TPM functionality, first enter the system BIOS Setup to activate the TPM chip.

Step 1:

As the computer starts, enter BIOS Setup and go to the Security Chip Configuration menu. The

following screen will appear. To activate the TPM chip, set Security Chip to Enabled. It's recommended

that you use the Clear Security Chip item to clear the TPM chip as well.

Security Chip Configuration

Security Chip [Enabled]

Clear Security Chip [Enter]

Security Chip State Enabled/Activated

KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Item Help

Menu Level`

Step 2:

After finishing the settings, press <F10> to save changes and then exit the BIOS Setup program.

Encrypted files will become inaccessible after the TPM chip is cleared. Be sure to back up the encrypted files first.

- 3 -

2. Installing the Infineon TPM Driver and the GIGABYTE Ultra TPM Utility

To use GIGABYTE's Ultra TPM, ensure that the Infineon TPM driver and the GIGABYTE Ultra TPM

utility have been installed in your system.

Method 1:

Insert the GIGABYTE motherboard driver disk. "Xpress Install" will automatically scan your system and

list all the drivers that are recommended for installation. Click the Install All button. "Xpress Install" will

install all of the selected drivers, including the Infineon TPM driver and the GIGABYTE Ultra TPM utility.

Method 2:

To individually install the Infineon TPM driver and the GIGABYTE Ultra TPM utility, go to the Install

Single Items menu and click the Install buttons on the right of the Infineon TPM Driver and GIGABYTE

Ultra TPM items.

Install the Infineon TPM driver. Install the GIGABYTE Ultra TPM utility.

- 4 -

3. Initializing the TPM Chip

After configuring the system BIOS and installing the driver software, a small Infineon Security Platform

icon (This icon indicates that the Infineon Security Platform is not yet initialized.) will appear in your

system tray. Double-click the icon to enter "Easy Mode" (refer to the instructions in Section 3.1) or

select "Advanced Mode" (refer to the instructions in Chapter 3.2) and then begin to initialize and

configure the Infineon Security Platform.

3.1. Easy Mode

Double-click the Infineon Security Platform icon in the system tray to launch the GIGABYTE

Initialization Wizard, which is the "Easy Mode" of the Security Platform. "Easy Mode" is an easy-to-use

user interface of the Security Platform that allows users to quickly initialize the TPM chip and set up a

Personal Secure Drive (PSD).

•"Easy Mode" simplifies the configuration procedure of the Infineon Security Platform initialization and

its functions. To make further settings, please select "Advanced Mode."

•"Easy Mode" provides the "File and folder encryption with Personal Secure Drive (PSD)" settings only.

To use the "File and folder encryption with Encryption File System (EFS)" or "Secure e-mail" functions,

please select "Advanced Mode."

Step 1: Set up a Password

Launch the GIGABYTE Initialization Wizard. This wizard will request you to set up a password. After entering

the password, click OK to begin the initialization of the Infineon Security Platform.

This password incorporates the functionalities of the "Owner Password", "User Password", "Emergency

Recovery Token Password" and "Password Reset Token Password" of the Infineon Security Platform. Be

sure to memorize this password to administrate and use the Security Platform in the future. For details on

the rules of the Infineon Security Platform passwords and their usage, please refer to the Infineon Security

Platform accompanying documentation.

- 5 -

Step 3: Set up a Personal Secure Drive (PSD)

Step 2: Infineon Security Platform Initialization

Begin the initialization of the Infineon Security Platform. The "TPM initialization successful!" message appears

upon completion of the initialization. Click Next to proceed with setting up a Personal Secure Drive (PSD).

Do not log off, shutdown, enter a power-saving state, or unplug the power cord before the wizard has completed.

3-1. Specify a drive letter and label for your Personal Secure Drive

To specify the drive letter for your Personal Secure Drive, select an unused letter from the My PSD will be mapped to drive:

drop-down list of available letters. To specify the drive label, enter the label in the Drive label for my PSD: box. The label

should be no more than 32 characters in length.

3-2. Specify your Personal Secure Drive size and a local drive on which your Personal Secure Drive will be saved

Select a local drive from the My PSD will be saved on drive: drop-down list for saving your Personal Secure Drive and

enter the Personal Secure Drive size in the Storage space of my PSD: box.

Your Personal Secure Drive size cannot be changed after setup, so please ensure that the size you

specify is large enough to meet your needs. Please note that you cannot use the full drive size, since the

file system allocates some space. This depends on the operating system and may be significant for small

drive sizes. Please also note that the maximum PSD drive size is limited:

The maximum PSD drive size on FAT16 volumes is 2 GB.

The maximum PSD drive size on FAT32 volumes is 4 GB.

Step 4: Complete the Settings

Click Exit to complete the initialization of the TPM chip and setup of the Personal Secure Drive (PSD).

You can then access the GIGABYTE Ultra TPM utility to set up a Portable User Key.

- 6 -

3.2. Advanced Mode

When the GIGABYTE Initialization Wizard is launched (by double-clicking the Infineon Security Platform

icon in the system tray), if you wish to configure further settings, click Advanced Mode to access

the Infineon Security Platform Initialization Wizard.

A. Infineon Security Platform Initialization Wizard - Owner

Click Advanced Mode to launch the Infineon Security Platform Initialization Wizard. Follow the on-

screen instructions to initialize the Security Platform Owner and to configure Security Platform Features

(backup including Emergency Recovery, Password Reset, Enhanced Authentication, BitLocker). This

wizard provides the basis for all further activities on the Infineon Security Platform.

A-1. When the Infineon Security Platform Initialization Wizard appears, click Next to continue.

- 7 -

A-2. Select Security Platform initialization and click Next to create the Security Platform Owner

Password.

The Infineon Security Platform Owner key is created and stored in the Infineon Trusted Platform Module

together with the Infineon Security Platform Owner secret. This key is protected by the Owner Password that

must be defined here. You must memorize this password in order to administrate the Security Platform.

- 8 -

A-3. Select Security Platform Features, which comprises Automatic Backup (includes Emergency

Recovery) and Password Reset. Click Next.

Details on Features

Automatic Backup (includes Emergency Recovery)

Check this feature, if you want to configure automatic Security Platform backups. Configuring Backup

is strongly recommended. Otherwise all user data will be lost in case of emergency.

Password Reset

Check this feature, if you want to create a Password Reset Token for all users. Configuring Password

Reset is strongly recommended. Otherwise Basic User Passwords can not be reset.

You cannot uncheck this feature, if the policy Enforce configuration of Backup including Emergency

Recovery is enabled.

You cannot uncheck this feature, if the policy Enforce configuration of Password Reset is enabled. This

feature can be configured only once. The selection is disabled, if Password Reset has already been configured.

A-4. With this page you can configure automatic Security Platform backups. The Security Platform

backups comprise the Security Platform Credentials and Settings and the PSD encrypted data, etc. This

can prevent if a hardware or storage media failure occur, the backups could restore for the certain users

settings. Click Next.

- 9 -

A-5. Select Create a new Recovery Token. Then enter a new token password to be used for

Emergency Recovery.

A-6. Select Create a new Token to create a Password Reset Token. Then enter a new token password.

A-7. Make sure you have selected all the functions you want to perform. Click Next to continue.

Do not log off, shutdown, enter a power-saving state, or unplug the power cord before the wizard has completed.

- 10 -

A-8. Click Finish to complete the initialization and configuration of the Infineon Security Platform. Then

access the Infineon Security Platform User Initialization Wizard (select the Start Security Platform

User Initialization Wizard check box).

B. Infineon Security Platform Initialization Wizard - User

The Infineon Security Platform User Initialization Wizard is used to initialize the Security Platform Users

and to configure the user-specific features (secure e-mail, file and folder encryption with EFS and PSD,

Enhanced Authentication). This wizard has to be started for each computer user, who is intended to use

the personalized Infineon Security Platform Features (i.e., who will be Infineon Security Platform User).

B-1. Launch the Infineon Security Platform User Initialization Wizard. Click Next to continue.

Otros manuales para GA-EG45M-DS2H

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de Gigabyte

Gigabyte

Gigabyte GA-G31M-ES2L Manual de usuario

Gigabyte

Gigabyte GA-K8V Ultra-939 Manual de usuario

Gigabyte

Gigabyte GA-Z68X-UD3P-B3 Manual de usuario

Gigabyte

Gigabyte MVBAYAI Manual de usuario

Gigabyte

Gigabyte GA-8IG Manual de usuario

Gigabyte

Gigabyte G210-H4G Manual de usuario

Gigabyte

Gigabyte GA-MA790X-DS4 Manual

Gigabyte

Gigabyte GA-J1800M-D2P Manual de usuario

Gigabyte

Gigabyte B450M GAMING Manual de usuario

Gigabyte

Gigabyte GA-Z87-D3HP Manual de usuario

Gigabyte

Gigabyte GA-H97TN Manual de usuario

Gigabyte

Gigabyte GA-F2A78M-DS2 Manual de usuario

Gigabyte

Gigabyte 7ZXR Series Manual de usuario

Gigabyte

Gigabyte GA-K8U Manual de usuario

Gigabyte

Gigabyte H23N-H60 Manual de usuario

Gigabyte

Gigabyte GA-P35-DQ6 Manual de usuario

Gigabyte

Gigabyte GA-MA770-S3 Manual

Gigabyte

Gigabyte R112-X30 Manual de usuario

Gigabyte

Gigabyte MW50-SV0 Manual de usuario

Gigabyte

Gigabyte B760M AORUS PRO AX Manual de usuario

Gigabyte

Gigabyte B460M D3H Manual de usuario

Gigabyte

Gigabyte GA-H270M-DS3H Manual de usuario

Gigabyte

Gigabyte IM-H410G Manual de usuario

Gigabyte

Gigabyte GA-H55N-USB3 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario