1. Introduction
With the G.hn modem G4201C you can easily extend
your network via existing coaxial cables.
It can use any type of coaxial cable for data transmission
and achieves a speed of approx. 1600 Mbit/s (sum of
both transmission directions).
The units can be connected both "point-to-point" (one
master and one client) and "point-to-multipoint" (one
master and up to 15 clients).
In networks with more than 15 clients distributed over
several coaxial cables, a G.hn switch G4200C can be used
(see installation). It provides the full bandwidth of 1600
Mbit/s on each cable strand, up to 90 clients are
supported. The switch also enables central
administration of all G.hn components.
2. Package content
G4201C Master or Client
DC-12V/1A Power adapter
1,5m Coax-QuickFix connection cable
3. Technical data
Dimensions: 111.5*83*24.5mm
Weight: 0,19kg
Operating temperature: 0°C - 40°C
Power consumption: < 3 Watt
4. G.hn Specification
G.hn Wave2, 2-200 MHz
Bandwidth: 1600 Mbit/s
Maximum permissible attenuation of the cable
connection: 75dB
tatus of the G.hn connection
(Green - OK, Yellow - weak signal,
Off - no connection)
