Gibson 315530 Manual de usuario

INSTRUCTION MANUAL

CAT-BACK SINGLE EXHAUST

SUBURBAN, YUKON XL

4.8L, 5.3L, 2/4WD

PART # 315530

ITEM PART # QTY DESCRIPTION

A 700270 1 HEADPIPE WITH FLANGE #GP-115

B 788824 1 SUPERFLOW MUFFLER

C 4138 1 REAR MUFFLER HANGER

D 700271 1 3” OVERAXLE TAILPIPE

E OHD300 1 3” CLAMP

F 500360 1 3 1/2” STAINLESS TIP

G 4147 1 3” FRONT HANGER

Thank you for purchasing our GIBSON EXHAUST SYSTEM for you vehicle. If you

need further assistance, please do not hesitate to call our Technical Department at

1-800-528-3044 Monday through Friday, 8:00 am to 5:00 pm.

EXHAUST INSTALLATION #315530

WHEN INSTALLING THE GIBSON EXHAUST MAKE SURE TO USE ALL THE PROPER

SAFETY PRE-CAUTIONS. USE A JACK STAND WHEN UNDER THE TRUCK, SET PARKING

BRAKE, BLOCK TIRES AND USE SAFETY GLASSES. DO NOT WORK WITH HOT PIPES!

SUGGESTED TOOLS:

15MM SOCKET, 9/16” SOCKET, ½”WRENCH & SOCKET, JACKSTAND, HACKSAW,WD-40

LAY OUT THE EXHAUST SO IT LOOKS LIKE THE DRAWING AND COMPARE TO THE MANUAL.

FOR EASIER REMOVAL OF

THE FACTORY EXHAUST.

CUT BEHIND THE MUFFLER

AT THE TAILPIPE. THEN

UNBOLT THE FACTORY

HEADPIPE AT THE FLANGE

IN FRONT OF THE MUFFLER

YOU WILL BE REUSING.

STOCK BOLTS.

INSTALL HEADPIPE # A

ONTO FACTORY FLANGE RE-

USING YOUR STOCK BOLTS

TO SECURE. DO NOT

TIGHTEN. NEXT, INSTALL

FRONT HANGER #G ONTO

HEADPIPE AND INSERT

HANGER INTO RUBBER

GROMMENT .

INSTALL THE OVERAXLE

TAILPIPE #D INTO THE

OUTLET OF THE MUFFLER

AND INSERT WELDED

HANGER INTO STOCK

RUBBER GROMMET.

YOU MAY NEED TO

LOOSEN THE SPARE TIRE

AND PUSH IT TO THE

DRIVER SIDE OF THE

VEHICLE FOR CLEARANCE

PURPOSES.

MAKE SURE YOU HAVE A MINIMUM OF A 1” CLEARANCE AWAY FROM ALL

RUBBER BRAKE LINES, TIRES, SHOCKS, FUEL LINES, ETC.

INSTALL YOUR

STAINLESS STEEL TIP.

USE ANY STAINLESS

CLEANER AND A

SCOTCH BRITE PAD.

NOW, FIRMLY

TIGHTEN ALL CLAMPS,

BOLTS, FLANGE, AND

HANGERS.

INSTALL MUFFLER # B

ONTO HEADPIPE 1 ½” TO 2”

WITH INLET TOWARDS

THE MOTOR MUFFLER

INLET IS LOOKING INTO

THE LOUVERS. MUFFLER

OUTLET SHOULD BE AT THE

8 O’CLOCK POSITION.

NEXT , INSTALL REAR

MUFFLER HANGER # C

ONTO MUFFLER OUTLET

INSERT HANGER INTO

RUBBER GROMMET.

DO NOT TIGHTEN.

Otros manuales de Accesorios para automóviles de Gibson

Gibson

Gibson 615555L Manual de usuario

Gibson

Gibson GP312S-C Manual de usuario

Gibson

Gibson 315555L Manual de usuario

Gibson

Gibson 615549 Manual de usuario

Gibson

Gibson 69202 Manual de usuario

Gibson

Gibson 315547 Manual de usuario

Gibson

Gibson 69202D Manual de usuario

Gibson

Gibson 65500 Manual de usuario

Gibson

Gibson 316584 Manual de usuario

Gibson

Gibson 619650 Manual de usuario

Gibson

Gibson 619900 Manual de usuario

Manuales populares de Accesorios para automóviles de otras marcas

James Baroud

James Baroud Odyssey Manual de usuario

Motorola

Motorola i50sx Manual de usuario

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manual de usuario

Feniex

Feniex T3 Manual de usuario

Renault

Renault 77 11 423 180 Manual de usuario

Kia

Kia E8300-4D000 Manual de usuario

Brink

Brink 756843 Manual de usuario

Whispbar

Whispbar K085W Manual de usuario

v.link

v.link CI-VL2-PC-HSD Manual de usuario

Viking

Viking Stack-Rack Guía de configuración rápida

Aries

Aries 203015 Manual de usuario

Choetech

Choetech AT0005 Manual de usuario

ZZ2

ZZ2 ZZAIR-PRO Manual de usuario

Holman

Holman 4A80L Manual de usuario

Thule

Thule 2075 Manual de usuario

Motorola

Motorola T325 Manual de usuario

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guía de instalación

DV8

DV8 FBJL-02 Manual de usuario