GIANTEX EP25423-T Manual de usuario
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
EN FR
USER'S MANUAL/MANUEL DE L'UTILISATEUR
EP25423-T EP25423-Q EP25423-K
Heated Mattress Pad / Surmatelas Chauffant
INCLUDED
1x MATTRESS PAD
1x Controller (Twin, Full)
2x Controllers (Queen, King)
1x User Manual
(Note: Please check first to make sure the product is complete without any
damage. If you have any doubt, please feel free to contact us.)
Read all the instructions. Gentle wash cycle in
water at 30℃/86℉
Do not puncture. Do not bleach.
Do not tumble dry.
Do not iron.
Do not dry clean.
Do not use if folded or
creased
Not suitable for very young
children (0-3 years).
Dispose of the packing in
an eco-friendly manner.
WARNING: Warning of risks of injury or health hazards.
CAUTION: Safety information about possible damage to
appliance/ accessories.
Name
Model
Size
Product Dimensions
Input Voltage
Rated Power
Timing Setting
Controller Model
HLMP-TC-HYT-T
Twin
39”x75”+15”
39”x75”+15” 54”x75”+15”
1-12 Hours Selectable Timer Setting
60”x80”+15” 78”x80”+15”
HL-HYT-05 HL-HYT-05 HL-HYT-06 HL-HYT-05
HLMP-TC-HYT-F
Full
54”x75”+15”
HLMP-TC-HYT-Q
Queen
60”x80”+15”
HLMP-TC-HYT-K
King
78”x80”+15”
MATTRESS PAD
Symbol Explanation
ENEN
02
30℃/86℉
IMPORTANT INSTRUCTIONS
DO NOT DESTROY
WARNINGS AND SAFEGUARDS
TO REDUCE RISKS OF BURNS, ELECTRIC SHOCK, OVERHEATING, FIRE
AND PERSONAL INJURY, THIS PRODUCT MUST BE USED IN ACCORDANCE
WITH THE FOLLOWING INSTRUCTIONS:
1.READ ALL INSTRUCTIONS BEFORE USING THE PRODUCTS.
2.THE PRODUCT IS DESIGNED ONLY TO WARM UP THE HUMAN BODY.
3.KEEP ALL DOGS, CATS AND OTHER PETS AWAY FROM THIS HEATED
PRODUCT. THIS IS AN ELECTRICAL APPLIANCE THAT THEY CAN DAMAGE
OR BE INJURED BY.
4.DO NOT USE THIS HEATED PRODUCT ON AN INFANT, A CHILD(0-3
YEARS OLD), AN INCAPACITATED OR IMMOBILE PERSON, A PARAPLEGIC,
A QUADRIPLEGIC, A DIABETIC, ONE INSENSITIVE TO HEAT SUCH AS A
PERSON WITH POOR BLOOD CIRCULATION OR ANYONE WHO CANNOT
CLEARLY UNDERSTAND THE INSTRUCTIONS AND /OR OPERATE THE
CONTROLS.
5.THIS PRODUCT CAN BE USED ON CHILDREN (3-8 YEARS OLD) ONLY
UNDER SUPERVISION FROM ADULTS AND IF THEY HAVE BEEN GIVEN
ADEQUATE INSTRUCTIONS IN HOW TO USE IT SAFELY.
6.THIS PRODUCT CAN BE USED BY CHILDREN OVER THE AGE OF 8,
PEOPLE WITH REDUCED PHYSICAL, SENSORY OR MENTAL SKILLS AND
PEOPLE LACKING EXPERIENCE OR KNOWLEDGE OF THEY ARE SUPERVISED
AND HAVE BEEN INSTRUCTED ON HOW TO USE IT SAFELY, FULLY AWARE
OF THE CONSEQUENT RISK OF USE.
7.CHILDREN SHOULD NOT PLAY WITH THE PRODUCT.
8.CLEANING AND MAINTENANCE MUST NOT BE PERFORMED BY CHILDREN
UNLESS SUPERVISED.
9.DO NOT USE THIS PRODUCT ON A WATERBED, SOFA, BUNK BED OR
MECHANICALLY ADJUSTABLE BED.
10.DO NOT USE THE PRODUCT WITH ROCKING CHAIRS, RECLINERS,
CHAIR WITH CASTERS OR WHEELS OR OTHER FURNITURE SUBJECT TO
MOVEMENT.
11.DO NOT USE WITH ANOTHER ELECTRICALLY HEATED PRODUCT SUCH
AS AN ELECTRIC BLANKET, ELECTRIC MATTRESS PAD OR HEATED THROW.
EN
03
12.DO NOT TUCK IN, PINCH, FLEX OR EXPOSE THE HEATING WIRE. DO
NOT WRAP OR TUCK THE PRODUCT, SUPPLY CORD OR CONTROL IN A
SOFA OR OTHER FURNITURE. ALL PORTIONS OF THE PRODUCT AND
CONTROLLER SHOULD BE VISIBLE AT ALL TIMES.
13.DO NOT PUNCTURE; DO NOT FASTEN IN PLACE USING PINS OR OTHER
METALLIC OBJECTS.
14.NEVER USE PINS IN AND AROUND THE PRODUCT. THEY MAY DAMAGE
THE ELECTRIC WIRING.
15.DO NOT ROUTE ELECTRICAL CORDS BETWEEN THE MATTRESS AND
BOX SPRING. DO NOT ALLOW THE CORDS TO BE PINCHED.
16.DO NOT PULL, TWIST OR MAKE SHARP BENDS ON THE CORDS.
17.DO NOT USE WITH DAMAGED CORDS. DAMAGED CORDS CAN LEAD TO
POSSIBLE OVERHEATING OR FIRE.
18.WRAPPING THE CORD AROUND THE CONTROLLER MAY DAMAGE THE
CORD. LOOP LOOSELY WHEN STORING.
19.IF THE PLUG DOES NOT FIT INTO OUTLET, CONTACT A QUALIFIED
ELECTRICIAN.
20.MAKE SURE THE CORD FROM THE CONTROLLER TO YOUR HEATED
PRODUCT IS CONNECTED AND LOCKED TIGHTLY.
21.DO NOT DRY CLEAN THE PRODUCT. CLEANING LIQUID MAY DAMAGE
THE INSULATION OF THE HEATING ELEMENT. IMPROPER LAUNDERING MAY
CAUSE PROBLEMS WITH THE HEATING WIRE WHICH CAN LEAD TO FIRE.
22.THIS PRODUCT IS NOT DESIGNED FOR MEDICAL USE IN HOSPITALS.
23.THE ELECTRICAL AND MAGNETIC FIELDS EMITTED BY THE PRODUCT
MAY INTERFERE WITH FUNCTIONS OF MEDICAL DEVICES LIKE A
PACEMAKER. PLEASE CONSULT YOUR DOCTOR BEFORE USE IF YOU ARE
EQUIPPED WITH A MEDICAL DEVICE.
24.PLEASE CHECK THE PRODUCT FREQUENTLY FOR SIGNS OF DAMAGE OR
WEAR AND TEAR. IF SUCH SIGNS ARE EVIDENT, IF THE PRODUCT HAS
BEEN USED INCORRECTLY OR IF IT NO LONGER HEATS UP, IT MUST BE
CHECKED BY THE MANUFACTURER BEFORE BEING SWITCHED ON AGAIN.
THERE ARE NO USER SERVICEABLE PARTS.
25.IF THE MAINS CONNECTION CORD IS DAMAGED, IT MUST BE
DISPOSED OF; IF THE CORD CANNOT BE REMOVED FROM THE PRODUCT,
THE PRODUCT SHOULD BE DISPOSED OF ALONG WITH THE CORD.
26.NEVER PULL BY THE CORD OR USE THE CORD AS A HANDLE; DO NOT
PINCH THE CORD.
EN
04
27.THE ELECTRONIC COMPONENTS IN THE CONTROLLER WOULD WARM
UP WHEN THE PRODUCT IS IN USE. FOR THIS REASON, THE CONTROLLER
MUST NEVER BE COVERED WHILE IN USE.
28.THE PRODUCT MAY EXPERIENCE INCREASED HEAT IN AREAS WHERE
HEATED PRODUCT IS BUNCHED OR FOLDED WHILE IN USE. THEREFORE,
DO NOT FOLD, BALL OR BUNDLE THE PRODUCT IN ANY WAY DURING USE
AS THIS MAY CAUSE OVERHEATING AND/OR PERMANENT WRINKLING OF
THE FABRIC.
29.DO NOT USE IN AN ENVIRONMENT WITH OVERLY ABUNDANT OXYGEN.
30.DO NOT PLACE THE CONTROLLER IN AREAS THAT MAY BE WET OR
DRAFTY, SUCH AS OPEN WINDOWS.
31.TURN OFF OR UNPLUG THE CONTROLLER FOR THE PRODUCT WHEN
NOT USING. NEVER LEAVE UNATTENDED WHILE USING, ESPECIALLY
WHILE CHILDREN ARE PRESENT.
32.BESURE THIS PRODUCT IS USED ONLY ON AN AC SUPPLY CURRENT
CIRCUIT OF 110-120 VOLTS 60HZ. DO NOT USE WITH AN EXTENSION
CORD. DO NOT USE WITH GENERATORS, POWER CONVERTERS, OR
INVERTERS.
33.THE PRODUCT SHOULD ONLY BE USED IN CONJUNCTION WITH THE
SPECIFIED CONTROLLER.
34.MUCH WASHING AND IMPROPER WASHING MAY CAUSE THE DAMAGE
OF THE PRODUCT AND BE SURE TO WASH THE PRODUCT ACCORDING TO
THE INSTRUCTION ON THE LABEL ON THE PRODUCT.
35.DO NOT USE IF THE PRODUCT IS WET.
36.THE CONTROLLER IS NOT WATERPROOF. DO NOT IMMERSE IN WATER.
37.NEVER IRON THE PRODUCT.
38.DO NOT USE WITH LINIMENT, SALVE OR OINTMENT PREPARATIONS.
39.FOR HOUSEHOLD USE ONLY.
40.NOT FOR HOTEL, MOTEL, OR OTHER INSTITUTIONAL USE.
IMPORTANT INSTRUCTIONS
DO NOT DESTROY
EN
05
POLARIZED PLUG:
Plug power cord into a 110-120 volt wall outlet.
Do not attempt to force the plug. This appliance
has a polarized plug (one blade is wider than the
other). To reduce the risk of electrical shock, this
plug is intended to fit only one way into an outlet.
If the plug does not fit in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician.
Do not attempt to modify the plug in any way. If the plug fits loosely into
the AC outlet or if the ac outlet feels warm, do not use that outlet.
FCC CERTIFIED
Note
This product complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1.This product may not cause harmful interference.
2.This product must accept any interference received, including interference
that may cause undesired operation.
This product has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential. This product generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If
this product does cause harmful interference to radio or televisions
reception, which can be determined by turning the product off and on, the
user is encouraged to correct the interference by one or more of the
following.
Measures:
*Reorient or relocate the receiving antenna.
*Increase the separation between the product and receiver.
*Connect the product into an outlet on a circuit different from that to which
the receiver is connected.
*Consult an experienced radio/TV technician for help.
EN
06
Product Operation Guide
When setting up the heated product, be sure to follow the steps below in
order.
Step 1: Locate the heated product's information label near the coupler.
Step 2: Connect the cord into the coupler at the bottom of the heated
product until the plastic hinges click into place.
CAUTION: Cord must be COMPLETELY CONNECTED. A risk of fire could
result from a loose connection.
Step 3: Plug the power cord into a 110-120 volt wall outlet.
CAUTION: Do not plug main power cord into the wall outlet until you have
completely set up your heated product according to the instructions.
●Disconnect the power cord from wall before detaching control from heated
product.
●Always make sure cords and controls are NOT trapped or pinched
between bed slats, mattress, springs, against wall, foot board or bed
frame, or between furniture, walls or chairs.
●Do not wrap control in heated product when in use.
●Do not use with generator power or inventor.
For the product
which with 2
controllers, you can
use them separately
according to the
steps and
instructions.
EN
07
CAUTION:
PLEASE follow these directions in order
they are given to ensure the product will
work correctly. Do not turn on the product
until it has been fully assembled.
Using Your Controller:
1.To turn the control on, press the “ON/OFF” button. The controller will
default to the lowest temperature setting.
2.Press the TIMER/HEAT Button to select your options.
3.While the “HEAT” sign is flashing on the LCD screen, you can adjust the
warming setting to your personal comfort by pressing the “+” or “-” .
There are totally 10 heat setting levels. From “1” to “10”, which ”1”
indicates lowest temperature.
4.While the “TIMER” sign is flashing on the LCD screen, the setting will be
on “8” at the beginning. You can adjust the “AUTO-SHUT OFF time” by
pressing the “+”or “-” according to your demand. There are 1-12 hours
Timer setting levels, the screen will show “1” to “12”, which “1” indicates 1
hour AUTO-SHUT OFF.
5.To turn the control off, press the “ON/OFF” button.
AUTO-SHUT OFF FEATURE
The “AUTO-SHUT OFF” feature is designed for conservation of energy by
automatically turning the product off.
This product has “ TIMER” function, so you can adjust the “AUTO-SHUT
OFF ” time according to your demand from 1-12 hours.
When you press the “TIMER/HEAT” button, the TIMER will default to 8
hours AUTO-SHUT OFF.
Without any selection, the product will be AUTO-SHUT OFF in 8 hours.
After a power outage, the “AUTO-SHUT OFF ” feature automatically resets
the TIMER.
CAUTION:
To plug the control cord connector and
coupler, make sure the align arrows on the
connector and cord are push until they
lock.
CAUTION: ALWAYS turn the product “OFF” when not in use.
To restart all products after a power failure.
Press the “ON/OFF” button and repeat the operation above, the product
will begin to warm.
EN
08
Before Washing or Storing Your Heated Bedding Product:
CARE INSTRUCTIONS
1. Disconnect power cord from wall BEFORE detaching control cord from
the heated product.
2. Ensure that no cords are still connected and none of the wires have
worn through the fabric.
3. Carefully follow all washing instructions or your heated product may
shrink and possibly cause a fire hazard.
EN
09
●DO NOT submerge control in water.
●DO NOT dry clean your heated product, as the dry cleaning solvents may
damage the wires.
●DO NOT use bleach or cleaning fluid.
●DO NOT use a wringer.
●DO NOT iron your heated product.
●DO NOT use mothballs or sprays of any kind.
●DO NOT reconnect the heated product or use it until it is COMPLETELY dry.
●DO NOT wash or put the power cord or any of the product's cords into
water.
●DO NOT use analgesic cream in combination with your heated product.
Taking care of your heated product is easy and safe as long as you follow a
few simple steps.
Machine Washing
1. Presoak the blanket/ mattress pad/throw for 15 minutes in mild soap
and cold water.
2. Wash in mild soap and cold water on the "delicate" or "gentle" cycle in
the washer for two minutes. Remember, do not use bleach.
3. Rinse in fresh, cold water.
4 Spin dry in the washing machine. Then gently stretch to its original size.
Machine Drying
Caution: Do not use commercial dryers or the dryers at your local
laundromat. They get too hot and would damage the wiring of the heated
product.
1. Preheat the dryer on the "low" temperature setting for 2 minutes.
2. Place blanket/mattress pad/throw into the dryer and tumble dry for 10
minutes at a low temperature.
3. Remove the blanket/mattress pad/throw while it is still damp and gently
stretch it to its original size.
4. Drape the heated product over a clothesline or a shower rod. DO NOT
use clothespins.
5. Heated product must be COMPLETELY dry before reconnecting the
power plug or control plug.
EN
10
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Idiomas:
