GeoVision GV Series Guía del administrador
1
[FAQ]
How to load default settings to GV-IP device & GV-System?
Article ID: GV13-01-31-k-1
Release Date: 01/31/2013
Applied to
GV-Video Server (GV-VS04H, GV-VS11, GV-VS12, and GV-VS14)
GV-Compact DVR V3 Series
GV-IPCAM H.264 Series
GV-DSP LPR V2 &V3
GV-System
Summary
Among different models of GV-IP devices, the time of loading default settings for each model
can vary and the way the LEDs flash can also be different.
2
Contents
GV-Video Server (GV-VS04H and GV-VS14) ......................................................................................... 3
GV-Video Server (GV-VS11 and GV-VS12) ............................................................................................ 4
GV-Compact DVR V3 .............................................................................................................................. 5
GV-IPCAM H.264 Series ......................................................................................................................... 6
Box Camera ......................................................................................................................................... 6
Ultra Box Camera ................................................................................................................................7
Mini Fixed Dome .................................................................................................................................. 7
Mini Fixed Rugged Dome .................................................................................................................... 8
Bullet Camera ...................................................................................................................................... 8
Ultra Bullet Camera.............................................................................................................................. 9
PTZ and PT Camera.......................................................................................................................... 10
Vandal Proof IP Dome ........................................................................................................................11
Fixed IP Dome ................................................................................................................................... 12
Cube Camera..................................................................................................................................... 12
Advanced Cube Camera.................................................................................................................... 13
GV-DSP LPR V2 & V3........................................................................................................................... 14
GV-System ............................................................................................................................................ 15
3
GV-Video Server (GV-VS04H and GV-VS14)
Refer to the figure and instructions below to load default settings for GV-VS04H and
GV-VS14.
GV-VS04H
GV-VS14
1. Press and then release the Reset button immediately.
2. Press and hold the Load Default button until all 3 LEDs (Power, Ready and Disk
Full/Fault) are on. This may take up to 30 seconds.
3. Release the Load Default button. The process of loading default values is complete,
and the GV-Video Server starts rebooting itself with all 3 LEDs turning off.
4. Wait until the Power and Ready LEDs turn on again. After this all the settings are
returned to default values.
Note: Before the Ready LED is on again, do not unplug the power cable; otherwise the
loading of default values will fail.
4
GV-Video Server (GV-VS11 and GV-VS12)
GV-VS11
GV-VS12
1. Unplug and plug the power cable to start.
2. Press and hold the Default button until the Ready LED blinks. This may take up to 30
seconds. The Ready LED will blink twice.
3. Release the Default button. The process of loading default values is complete, and the
GV-Video Server starts rebooting itself with the 2 LEDs turning off.
4. Wait until the Power and Ready LEDs turn on again. After this all the settings are
returned to default values.
Note: Before the Ready LED is on again, do not unplug the power cable; otherwise the
loading of default values will fail.
5
GV-Compact DVR V3
Refer to the figures and instructions below to load default settings for GV-Compact DVR V3.
Standard Model
2
LEDs Reset Load
Default
ACC Model
2 LEDs Reset Load Default
1. Press and then release the Reset button immediately.
2. Press and hold the Default button until the 2 LEDs (Power and Ready) are on. This may
take up to 30 seconds.
3. Release the Default button. The process of loading default values is complete, and the
GV-Compact DVR starts rebooting itself with Ready LED turning off.
4. Wait until the Power and Ready LEDs turn on again. After this, all the settings are returned
to default values.
Note: Before the Ready LED is on again, do not unplug the power cable; otherwise the
loading of default values will fail.
6
GV-IPCAM H.264 Series
There are twelve models of GV-IPCAM H.264 Series: Box, Ultra Box, Mini Fixed Dome, Mini
Fixed Rugged Dome, Bullet, Ultra Bullet, PTZ and PT, Vandal Proof IP Dome, Fixed IP Dome,
Cube, and Advanced Cube.
Box Camera
1. Keep the power and network cables connected to the camera.
2. Use a pin to press and hold the default button on the back panel of the camera.
Default button
3. Release the default button when the status LED blinks. This shall take about 8
seconds.
Status LED
4. When the status LED fades, the process of loading default settings is completed and the
camera reboots automatically.
7
Ultra Box Camera
1. Keep the power and network cables connected to the camera.
2. Use a pin to press and hold the default button on the back panel of the camera.
3. Release the default button when the status LED blinks. This shall take about 8
seconds.
Status LED
4. When the status LED fades, the process of loading default settings is completed and the
camera reboots automatically. When the status LED turns on (green), the camera is
ready for use.
Mini Fixed Dome
1. Keep the power and network cables (or PoE) connected to the camera.
2. Press and hold the default button.
3. Release the default button when the status LED blinks. This shall take about 8
seconds.
4. When the status LED fades, the process of loading default settings is completed and the
camera reboots automatically.
8
Mini Fixed Rugged Dome
1. Keep the PoE cable connected to the camera.
2. Press and hold the default button.
Status LED
Default button
3. Release the default button when the status LED blinks. This shall take about 8
seconds.
4. When the status LED fades, the process of loading default settings is completed and the
camera reboots automatically.
Bullet Camera
1. Keep the power and network cables connected to the camera.
2. Loosen the camera’s cover and remove the Silica Gel Bag.
3. Press and hold the default button for 8 seconds.
Default Button
4. Release the default button. When the process of loading default settings is completed,
the camera reboots automatically.
5. Insert a new Silica Gel Bag and fasten the camera’s cover immediately.
9
Ultra Bullet Camera
1. Keep the power and network cables (or PoE) connected to the camera.
2. Press and hold the default button.
3. Release the default button when the status LED blinks. This shall take about 8
seconds.
4. When the status LED fades, the process of loading default settings is completed and the
camera reboots automatically.
10
PTZ and PT Camera
There are two types of default settings: camera default settings and system default
settings. Camera default settings include all settings on Iris, White Balance, Image Reverse
and Other in the VISCA OSD Configuration dialog box. System default settings refer to all the
settings of the PTZ / PT camera except the camera settings.
To load camera default settings (only available in PTZ camera):
1. On the left menu of Web interface, select Digital I/O and PTZ, select PTZ Settings, and
select System Configure. The VISCA OSD Configure dialog box appears.
2. Click the Load Camera Default button.
To load system default settings:
1. Unplug the power cable and the network cable (or the PoE cable).
2. Press and hold the default button.
Load
Default
Otros manuales para GV Series
3
Este manual sirve para los siguientes modelos
21
Tabla de contenidos
Otros manuales de Sistema de seguridad de GeoVision
GeoVision
GeoVision GV-Hot Swap V5 Series Manual de usuario
GeoVision
GeoVision GV-NVRH V5 Manual de usuario
GeoVision
GeoVision GV-HOT SWAP V3 Manual de usuario
GeoVision
GeoVision GV-NVR System Lite V2 Series Manual de usuario
GeoVision
GeoVision GV-SNVR0411 Manual de usuario
GeoVision
GeoVision Surveillance system Manual de usuario
GeoVision
GeoVision GV-CMS Series Manual de usuario
GeoVision
GeoVision GV-3D People Counter V2 Manual de usuario
GeoVision
GeoVision GV-Mini Manual de usuario
GeoVision
GeoVision GV-4008 Manual de usuario
GeoVision
GeoVision GV-NAS SYSTEM Manual de usuario
GeoVision
GeoVision GV-GF1911 Manual de usuario
GeoVision
GeoVision GV-Hot Swap Surveillance System V5 Manual de usuario
GeoVision
GeoVision GV-Control Center System Manual de usuario
GeoVision
GeoVision GV-IP Decoder Box Manual de usuario
GeoVision
GeoVision IGV8550-A Manual de usuario
GeoVision
GeoVision GV-SDI-204 Manual de usuario
GeoVision
GeoVision GV-2004 Manual de usuario
GeoVision
GeoVision Surveillance system Manual de usuario
GeoVision
GeoVision Surveillance System V8.4 Manual de usuario
Manuales populares de Sistema de seguridad de otras marcas
EDM
EDM Solution 6+6 Wireless-AE Manual de usuario
Highway Safety Group
Highway Safety Group EA401 Manual de usuario
Siren
Siren LED GSM Manual de usuario
Detection Systems
Detection Systems 7090i Instrucciones de montaje
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manual de usuario
Siemens
Siemens FDM273 Manual de usuario