GeoVision GV-SD220 Series Manual del operador
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use. ISD220200-QG-B
Quick Start Guide
GV-IP Speed Dome
© 2013 GeoVision, Inc. All rights reserved.
Under the copyright laws, this manual may not be copied, in whole or in
part, without the written consent of GeoVision.
Every effort has been made to ensure that the information in this manual is
accurate. GeoVision, Inc. makes no expressed or implied warranty of any
kind and assumes no responsibility for errors or omissions. No liability is
assumed for incidental or consequential damages arising from the use of
the information or products contained herein. Features and specifications
are subject to change without notice.
GeoVision, Inc.
9F, No. 246, Sec. 1, Neihu Rd.,
Neihu District, Taipei, Taiwan
Tel: +886-2-8797-8377
Fax: +886-2-8797-8335
http://www.geovision.com.tw
Trademarks used in this manual: GeoVision, the GeoVision logo and GV
series products are trademarks of GeoVision, Inc. Windows and Windows
XP are registered trademarks of Microsoft Corporation.
June 2013
Contents
1. Introduction............................................................... 1
2.......................... 2
2
................................ 2
................................ 3
4
................................ 5
ount........... 5
Mount..................... 7
................................ 9
10
.............................. 10
ng In..................11
.............................. 13
.............................. 15
2.8 Configuring a Preset Position............................................... 17
2.9 Configuring a Sequence Route ............................................ 19
2.10 Configuring a Cruise .......................................................... 22
2.11 Configuring an Auto Pan..................................................... 23
2.12 Configuring a Tour.............................................................. 25
2.13 Upgrading System Firmware.............................................. 27
2.14 Restoring to Default Settings.............................................. 29
. GV-SD220 / SD220-S.......................
2.1 Packing List ...........................................................................
2.1.1 Indoor GV-IP Speed Dome...........
2.1.2 Outdoor GV-IP Speed Dome ........
2.2 Overview................................................................................
2.3 Installation..............................................
2.3.1 Indoor GV-IP Speed Dome: Hard-Ceiling M
2.3.2 Outdoor GV-IP Speed Dome: Wall
2.4 Connecting the Cables...........................
2.5 Accessing the Camera .........................................................
2.5.1 System Requirements ..................
2.5.2 Looking Up the IP Address and Loggi
2.6 The Web Interface..................................
2.7 The PTZ Control Panel...........................
i
2.14.1 Restoring All the Settings.......................................... 29
29
ings Only............... 30
3. G 31
.............................. 31
.............................. 31
.............................. 32
.............................. 33
3.3 Installation............................................................................ 34
e Mount ................ 34
Pendent Mount..... 37
.............................. 39
.............................. 41
41
gging in.................. 42
3.6 The Web Interface................................................................ 44
3.7 The PTZ Control Panel......................................................... 45
3.8 Configuring a Preset Position............................................... 47
3.9 Configuring a Sequence Route ............................................ 49
3.10 Configuring a Cruise .......................................................... 52
3.11 Configuring an Auto Pan..................................................... 54
3.12 Configuring a Tour.............................................................. 56
2.14.2 Restoring System Settings Only ...............................
2.14.3 Restoring PTZ Configuration Sett
V-SD200 / SD200-S...............................................
3.1 Packing List ...........................................
3.1.1 Indoor GV-IP Speed Dome...........
3.1.2 Outdoor GV-IP Speed Dome ........
3.2 Overview................................................
3.3.1 Indoor Speed Dome Mount: Surfac
3.3.2 Outdoor Speed Dome Mount: Mini
3.4 Connecting the Cables...........................
3.5 Accessing the Camera ...........................
3.5.1 System Requirements ................................................
3.5.2 Looking up the IP Address and Lo
ii
3.13 Upgrading System Firmware.............................................. 59
3.14 Restoring to Default Settings.............................................. 61
iii
iv
1. Intr
de. In the following
sections, you will be guided through the basic installations and
io V D200/GV-SD200-S.
led tion, er’s Manual on the
re C
oduction
Welcome to the GV-IP Speed Dome Quick Start Gui
configurat ns of the G -SD220/GV-SD220-S/GV-S
see GV-IP Speed Dome UsFor detai informa
Softwa D.
Model Application Description
GV-SD220 Indoor
GV-SD220-S Outdoor
2 MP H.264, 20x optical zoom, 12x
digital zoom, WDR pro
GV-SD200 Indoor
GV-SD200-S Outdoor
2 MP H.264, 18x optical zoom, 8x
digital zoom, WDR pro
2. GV-SD220 / SD220-S
2.1 Packing List
2.1.1 Indoor GV-IP Speed Dome
•Indoor GV-IP Speed Dome
•Hard-Ceiling Cover
te•Mounting Pla
•GV-IP Speed Dome
Software CD
•GV-NVR Software DVD
GV-SD220 / SD220-S
2
2.1.2 Outdoor GV-IP
•Outdoor GV-IP Speed Dome
Speed Dome
•Pendant Tube
•Hex Keys x 2
•M6 Screws x 3
•Desiccant pack x 4 •GV-IP Speed Dome
Software CD
•GV-NVR Software DVD
3
2.2 Overview
1
2
3
4
5
6
No. Name Description
1. e factory default values.
storing to Default Settings.
ault Restores all the settings to th
Def For details, see 2.13 Re
2. Status status LED turns green when the power is on and
fades when the camera is ready for use.
The
3. Power The power LED turns green when the power is on.
4. ACT The ACT LED flashes orange light upon data
transmission.
5. Link The Link LED turns green with Internet connectivity.
6. Memory
Card Slot
Insert a micro SD/SDHC/SDXC card to store
recording data.
4
Otros manuales para GV-SD220 Series
5
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Cámara de seguridad de GeoVision
GeoVision
GeoVision GV-QSD5730-Indoor Manual de usuario
GeoVision
GeoVision GV-LPR Manual de usuario
GeoVision
GeoVision GV-FE2301 Manual de usuario
GeoVision
GeoVision GV-MFD1501 Manual de usuario
GeoVision
GeoVision GV-IP Speed Manual de usuario
GeoVision
GeoVision GV-LPR CAM V2.0 Series Manual de usuario
GeoVision
GeoVision GV Series Manual de usuario
GeoVision
GeoVision GV-BX120D series Manual de usuario
GeoVision
GeoVision GV-EBD2702: GV-EBD4700 Manual de usuario
GeoVision
GeoVision GV-PDR8800 Manual de usuario
GeoVision
GeoVision GV-BL1500 Manual de usuario
GeoVision
GeoVision GV-FD8700-FR Manual de usuario
GeoVision
GeoVision GV-EBD Series Manual de usuario
GeoVision
GeoVision GV-EBD2702: GV-EBD4700 Manual de usuario
GeoVision
GeoVision GV-IRCAM 10M EIA DC12V Manual de usuario
GeoVision
GeoVision GV-EBD4700 Manual de usuario
GeoVision
GeoVision GV-BX110D Manual de usuario
GeoVision
GeoVision GV-EBD4711 Manual de usuario
GeoVision
GeoVision GV-BX110D Manual de usuario
GeoVision
GeoVision 84-SD2301S-2011 Manual de usuario
