Geokon 8800 Manual de usuario
Product Tutorial
Troubleshooting GeoNet Wireless
Data Hosting Systems
Many hardware and software issues can be prevented or
resolved with a better understanding of the product
Please read the Installing GeoNet Wireless Data Hosting
Systems and Using Agent Software with GeoNet Wireless Data
Hosting Systems tutorials and review the product manuals prior
to attempting to troubleshoot a Network
Before Continuing
Network Tips
Always mount GeoNet
devices vertically, with the
antenna pointing up
The space around the
antenna should be free of
obstructions
A minimum mounting height
of two meters (six-feet) is
recommended
Device Mounting
Obstructions between,
around, or near GeoNet
devices can cause reflections
of the radio signal
Reflected radio signals can
cause GeoNet devices to
malfunction
For optimum performance,
create as much space as
possible between the straight-
line radio path and any
obstructions (especially
metallic objects)
Device Mounting (Continued)
Common mounting
mistakes include:
►Not enough clear space
around the antenna
►Mounting devices
horizontally
►Metallic objects nearby
The photos to the right
show examples of improper
device mounting
Device Mounting (Continued)
All GeoNet devices are set to operate on the same channel at
the factory
Channels only need to be set if multiple networks will be
operating within radio range of one another
Networks within radio range of one another
must not
be set to
the same channel
Up to 12 Networks can operate in the same area by utilizing a
different channel for each Network
Setting Channels
To set the channels on a
device:
1. Activate Deployment mode
2. Move the channel switches
to one of the 12 valid settings
3. Press the reset button
GeoNet Devices can only
communicate when set to the
same channel, therefore,
ALL DEVICES
in a network
must be set to the same
channel
Setting Channels (Continued)
Must be used when making changes to a network
(adding Nodes, changing batteries, resetting a device, etc.)
Indicated by the LEDs on the Supervisor flashing every 10-15
seconds
Automatically activated when Supervisor is powered
Active for 60 minutes by default
(Can be changed using Agent software)
Can be reactivated/reset by pressing the status button on
the Supervisor
(May take up to 6 minutes to take effect)
Deployment Mode
Otros manuales para 8800
5
Tabla de contenidos
Otros manuales de Registrador de datos de Geokon
Geokon
Geokon 8800 Manual de usuario
Geokon
Geokon LC-2 Manual de usuario
Geokon
Geokon GeoNet 8900 Series Manual de usuario
Geokon
Geokon GeoNet 8900 Series Manual de usuario
Geokon
Geokon GK-404 Manual de usuario
Geokon
Geokon GeoNet 8000 Series Manual de instrucciones
Geokon
Geokon GeoNet 8900 Series Manual de usuario
