Genmitsu Z3 Manual de usuario
V1.0 Oct. 2022
USER MANUAL
Genmitsu Z3 Laser Engraver & Cutter
Contents
Welcome
Safety Guideline
Product Details and Accessories
Product Structure Accessories
Product Parameters
Usage Guide
Function Introduction
Resources Download and Software Setup
APP Download & Introduction
Resources Download and Software Setup
Custom PC Engraving Software Introduction
FAQ
01
02
04
05
06
07
08
08
09
15
19
24
Welcome
Thank you for purchasing the Z3 Laser Engraver & Cutter from SainSmart.
Included in your package will be a USB Drive, that contains:
● Manuals
● Windows USB Driver
● Sample Files
Help and support are normally available from our Facebook Group. (SainSmart Genmitsu CNC Users Group,
https://www.facebook.com/groups/SainSmart.GenmitsuCNC)
You can visit our help doc https://docs.sainsmart.com/togetmoreuserguides about CNC & Laser Engraving.
01
Safety Guideline
Laser processing is risky and users should carefully consider whether the object is suitable for laser processing.
You must be at least 13 years old to operate the laser engraver.
Direct exposure to the laser beam can cause severe bums and eye damage. Ensure that you are weaning
proper laser safety goggles when working in the vicinity of the laser equipment .
Processing objects and emissions shall comply with local laws and regulations.
It is strictly forbidden to place any irrelevant total or diffuse reflecting objects in the equipment.
The equipment should be kept away from electrical equipment that is sensitive to electromagnetic interference,
otherwise it will cause interference.
When you focus the laser do so only on the lowest power setting.
Keep a fire extinguisher nearby since use of the laser may lead to an unexpected fire.
Never leave an operating laser unattended.
Fumes and smoke generated during the engraving / cutting process must be extracted from the room as some
can be poisonous : make sure there is a ventilated system to the outdoors.
Make sure the cutting area under the laser is metal or non-flammable.
Ensure that the room or area you are operating the laser in is sufficiently labeled to prevent someone from
unknowingly walking into an active work area.
Always exercise safety and caution when working with laser marking systems. Consider the listed
recommendations to minimize risk:
02
Safety Guideline
SainSmart does not accept any responsibility or liability for any use or misuse of the Laser.
1. Beware of the laser
After the laser is turned on, it is forbidden to aim at people, animals and flammable materials to avoid
skin burns and fire.
3. No entry
Keep your hands away from the machine when the machine is working to avoid injury.
2. Do not look directly at the light
The brightness of the laser is harmful to the eyes, please try not to look directly at the laser.
4. Turn off machine when not in use
Turn off the machine switch when the machine is not in use to avoid third-party operations.
Be sure to disconnect the power when cleaning, maintaining or servicing the laser equipment.
DO NOT stare at the bright and intense light appearing during the engraving process. Doing so can cause
serious eye damage.
Never use the laser except for the purpose intended.
Pay attention to
03
Product Details and Accessories
1. Front View 2. Rear View
3. Top View 4. Bottom View
Laser Unit
Power Button
Focus Button
Electric Stand
Type-C Port
DC Input
USB Port (for
Rotation Module)
Base and Cutting Ped
04
Pedestal
Product Structure Accessories
Power Supply: Supply power for the engraving machine.
USB Drive: Contains drivers, engraving software for PC, user manual and video instruction.
USB Cable: Connect the computer and the machine.
Laser Safety Goggles: Protect your eyes from hazardous laser eye exposure.
Marker: Paint the engraving surface with marker or paints before engraving, and clean it when the job’s done.
Brush: Remove particles.
Kraft Paper: Sample materials to evaluate your laser engraver.
Magnet Protective UV Shield (optional): The protective shields around the machine protect your eyes from laser damage.
Portable Charger (optional): Portability.
Rotary Attachment (optional): Add-ons to engrave cylindrical objects, and an additional USB cable is needed.
Power Supply×1
Magnet Protective
UV Shield (optional)
Portable Charger
(optional)
Rotary Attachment
(optional)
USB Drive×1 USB Cable×1 Marker×1 Brush×1
Kraft Paper
×1
05
Laser Safety
Goggles×1
205.5mm
130mm
mm842
Product Parameters
Z3
High Strength Anodized Aluminum
Automatic Focusing
450nm Blue Laser
5W
Bluetooth 5.0 Dual Mode Adapter, Type-C Port for PC
Mobile: Android & iOS. Desktop: Windows & Mac OS
JPEG/BMP/GIF/PNG/JPG/XJ/PLT/DXF/HPGL
12V/5A, Portable Charger
0.89A(Standby) 2.2A(Engraving)
Forced Air Cooling
>10000H
8cm×8cm (3.14"×3.14")
0.05mm
600mm/s (1417"/min)
Paper, Wood, Bamboo, Cloth, Acrylic, Plastic, Leather, Bread, Fruit, Glass, Ceramic
Paper, Wood, Bamboo, Leather
Windows/IOS/MAC/Android
21×13×22cm (8.27"×5.12"×8.66")
35*25*14cm (13.78"×9.84"×5.51")
1.9KG
Model
Material
Laser Focus
Laser Head
Laser Power
Connecting Interfaces
Operating Systems
File Formats
Power Supply
Power Consumption
Cooling
Laser Service Time
Engraving Area
Engraving Accuracy
Engraving Speed
Engravable Materials
Cuttable Materials
Support OS
Laser Unit Size
Package Size
Machine Weight
06
Usage Guide
Use of Z3
07
a. Open the Electric Stand
Three Operational Modes
a. Removing the Base:
Perfect for Large Objects
b. Flat Surface Attached to
the Base: Used for Smaller Objects
c. Honeycomb Cutting Surface
of the base: Cutting Materials
b. Open the Laser Unit c. Finish
Electric Stand
Laser Unit
Function Introduction
Resources Download and Software Setup
Method 1: Driver, software, sample picture and instructions can be found in the USB flash drive that comes
with the machine. ( Note: We recommend you to copy all files to your computer when you use it for the first time
in case the flash drive get lost.)
Method 2: Download it from SainSmart Resources Center. All files included
in the flash drive can also be downloaded from Sainsmart Resources Center:
https://docs.sainsmart.com/z3 or the following QR Code.
Scan QR code to download software and user manual. → →
08
Short press once to preview,
press again to stop.
Long press once to engrave, long
press again to cancel engraving.
During engraving, short press to
stop engraving, short press again
to continue.
Power Button:
Short press to automatic focus.
Long press once to go up, long
press again to get down.
Focus Button:
Tabla de contenidos
Otros manuales de Cortador de Genmitsu
Manuales populares de Cortador de otras marcas
Milwaukee
Milwaukee HEAVY DUTY M12 FCOT Manual de usuario
Makita
Makita DCS552 Manual de usuario
SignWarehouse.com
SignWarehouse.com Bobcat BA-60 Manual de usuario
Makita
Makita 4112HS Manual de usuario
GEISMAR STUMEC
GEISMAR STUMEC MTZ 350S Manual de usuario
Hitachi
Hitachi CM 4SB2 Guía de solución de problemas
