Genius N5000 Instrucciones de montaje

Tabla de contenidos

Otros manuales de Ratón de Genius

Genius

Genius SCROLLTOO 800 Manual de usuario

Genius

Genius ERGO 300 Manual de usuario

Genius

Genius NAVIGATOR R820BT Manual de usuario

Genius

Genius TRAVELER 915 LASER Manual de usuario

Genius

Genius NETSCROLL 310 Manual de usuario

Genius

Genius MINI TRAVELER LASER Manual de usuario

Genius

Genius Bluetooth Traveler Manual de usuario

Genius

Genius XSCROLL Manual de usuario

Genius

Genius SCROLLTOO T955 Manual de usuario

Genius

Genius SCROLLTOO 200 Manual de usuario

Genius

Genius TRAVELER 100V Manual de usuario

Genius

Genius Navigator 900G Manual de usuario

Genius

Genius TRAVELER 1000 Manual de usuario

Genius

Genius TRAVELER 315 LASER Manual de usuario

Genius

Genius MT900BT Manual

Genius

Genius ERGO T355 LASER Manual de usuario

Genius

Genius TRAVELER 515 LASER Manual de usuario

Genius

Genius TRAVELER 900 Manual de usuario

Genius

Genius TRAVELER 600 LASER Manual de usuario

Genius

Genius WIRELESS MINI NAVIGATOR Manual de usuario

Genius

Genius Micro Traveler 900LS Manual de usuario

Genius

Genius NX-7015 Manual de usuario

Genius

Genius NetScroII Optical Manual de usuario

Genius

Genius NETSCROLL G500 LASER Manual de usuario

Manuales populares de Ratón de otras marcas

Sven

Sven RX-G720 Manual de usuario

3DConnexion

3DConnexion CadMouse Pro Manual de usuario

Canyon

Canyon Puncher GM-20 Manual de usuario

Sharkoon

Sharkoon Light2 180 Manual de usuario

Cherry

Cherry MW 8C ERGO Manual de usuario

NGS

NGS HIT RB Manual de usuario

Sharkoon

Sharkoon FireGlider Manual de usuario

Lenovo

Lenovo Wireless Mouse N3902 Manual de usuario

BASETech

BASETech BN-S11 Manual de usuario

Dell

Dell WM326 Manual de usuario

Areson

Areson B213 Manual de usuario

HP

HP M17587-371 Manual de usuario

Chatpen

Chatpen CHA-30 Manual de usuario

GAMDIAS

GAMDIAS DEMETER GMS5000 Manual de usuario

HP

HP KJ453AA - Wireless Laser Mouse Manual de usuario

Trust

Trust GRAPHIN GXT 960 Manual de usuario

Lenovo

Lenovo SD-9082 Manual de usuario

Alienware

Alienware AW320M Manual de usuario

Hardware Installation

1. You can connect the receiver to a USB port of a PC

2. Install two AA batteries in the mouse.

3. Turn on your computer.

4. After you open Windows, please press the button on the receiver first and then

press the button under the mouse for channel setting.

Important: Remember do not put the batteries in the wrong direction, use the same

types of batteries. Also, keep all drinks away! If any spill occurs on the receiver,

unplug the USB connector first and clean the receiver immediately. Please switch the

button to "off" under the mouse once you don't use it for a long time, and remove the

batteries if you do not use this device for at least two weeks.

Warning: (Troubleshooting)

1. Please do not use wireless optical mouse on a desk which is made of glass, mir-

ror, iron, or black velvet. Also, a flat surface is necessary or the optical sensor

will error easily. When you use wireless optical mouse on a desk that is made of

metal, try using a pad and reduce the receiving distance.

2. Before the first installation is completed (channel setting ready), the mouse will

not work in DOS.

3. The wireless optical mouse channel provides 256 ID-codes, and it automatically

selects the ID # for your mouse. You can only set up one wireless optical mouse

at a time. But if you have additional wireless optical mouse sets in an area of 10

square meters, more interference will occur between the receiver and your

mouse.

4. If you feel the mouse does not move smooth as usual, then the batteries have lost

their charge, so please replace them.

5. The wireless optical mouse with radio frequency gives you free movement and

an enjoyable experience. For optimal performance, place the receiver at least 8

inches (about 20 cm) away from the mouse and other electrical devices, such as

the computer, monitor, and etc.

1

ENGLISH

Software Installation

1. Make sure the mouse is connected to the computer.

2. Put the Setup disk (or CD) into the disk drive.

3. Follow the instructions on the screen to finish the software installation.

Factory Setting

Changing the Faceplate

Push the button underneath

the mouse towards the front,

and the faceplate will pop off

Button Assignments

1. Left Button: Provides traditional mouse functions

like click, double click and drag.

2. Right Button: You can assign this button to fre-

quently used keyboard and mouse functions in ad-

dition to features like Easy Jump, Auto-Panning,

Zoom, etc.

3. Magic-Roller: Press the “Magic-Roller” to surf

the Internet and Windows documents.

4. Back: See previous page when viewing the Inter-

net.

5. Forward: Go to next page when viewing the

Internet.

6. Application Switch: You can switch between ac-

tive programs and documents.

Button Assignments

2