Genius CR-802UX COMBO Manual de usuario
User’s Manual
USB 2.0 Multi-Plus Card Reader w/3-Port Hub
Table of Contents
Safety Instructions…………………………………………..……………………….…..……1
Introduction…………………………………………...……………………………..……….…1
Features………………………………………………………..…………………….……..…...2
System Requirements……………………………………..………………………..……..….2
Package Contents…………………………………………..……………………..………..…2
Specification……………………………………………..…….……………………………..…3
Driver Installation……………….....…..…………………………..…………………..………3
Software Installation………………..…..…………………………..…………………..……17
Installation Verification………….………………………...………………………………...24
Certificate………………………………………………..….………………………………….27
Disclaimer……………………..…………..………………..………………………………….27
Safety Instructions
Always read the safety instructions carefully
Keep this User’s Manual for future reference
Keep this equipment away from humidity
Lay this equipment on a reliable flat surface before setting it up
If any of the following situation arises, get the equipment checked by a service
technician:
The equipment has been exposed to moisture.
The equipment has been dropped and damaged.
The equipment has obvious sign of breakage.
The equipment has not working well or you cannot get it work according to
User’s Manual.
Introduction
The USB 2.0 Multi-Plus Card Reader w/3-Port Hub is an innovative product, which
combines USB Hub with multi-in-1 Card Reader function. It not only allows your PC or
MAC to connect more and multiple USB 2.0 high performance devices, but also enables
you to read from, write and erase to the most popular formats of memory cards including
CompactFlashTM Type I/II, IBM MicrodriveTM, SmartMediaTM (SM), Memory Stick® (MS),
Memory Stick PRO® (MS PRO), Memory Stick Duo®(Adapter needed), Memory Stick Pro
Duo®(Adapter needed), SecureDigitalTM (SD), Mini SD (Adapter needed),
MultiMediaCardTM (MMC), RSMMC (Adapter needed) and XD** Picture Card. You can
easily remove different kinds of memory cards from your camera and insert it into this
card reader; and then access the card as a disk drive at USB high-speed transfer rate of
up to 480Mbps.
**Not all types of Card Reader w/3-Port Hub support XD picture card. Please check the package or
the vender for the XD picture card support.
1
Features
● Supports CompactFlashTM Type I/II, IBM MicrodriveTM, SmartMediaTM (SM), Memory
Stick® (MS), Memory Stick PRO® (MS PRO), Memory Stick Duo®(Adapter needed),
Memory Stick Pro Duo®(Adapter needed), SecureDigitalTM (SD), Mini SD (Adapter
needed), MultiMediaCardTM (MMC), RSMMC (Adapter needed) and XD** Picture Card,
and allow data exchange between cards in different slots.
● Adds 3 USB 2.0 Ports to your PC.
● Fully compliant with USB 1.1/2.0 specification.
● Maximum data transfer rate of 480Mbps.
● Supports Hot-Swap and Plug & Play function.
**Not all types of Card Reader w/3-Port Hub support XD picture card. Please check the package or
the vender for the XD picture card support.
System Requirements
● IBM Compatible Pentium-233 MHz or faster, or MAC desktop PCs.
● 64 MB RAM or more.
● PC or MAC with USB port available.
● OS support:
zWindows®98SE
zWindows® ME
zWindows® 2000
zWindows® 2000 SP4
zWindows® XP
zMacTM 9.X
zMacTM 10.X or up
Package Contents
● USB 2.0 Multi-Plus Card Reader w/3-Port Hub x 1
● PowerAdapter x 1
● Software Driver CD x 1
● Quick Installation Guide x 1
● USB 2.0 Cable (optional)
2
Specification
Product Name USB 2.0 Multi-Plus Card Reader w/3-Port Hub
Data Transfer Rate 1.5/12/480 Mbps
Supports CompactFlashTM Type I/II, IBM MicrodriveTM, SmartMediaTM
(SM), Memory Stick® (MS), Memory Stick PRO® (MS PRO), Memory Stick
Duo®(Adapter needed), Memory Stick Pro Duo®(Adapter needed),
SecureDigitalTM (SD), Mini SD (Adapter needed), MultiMediaCardTM
(MMC), RSMMC (Adapter needed) and XD** Picture Card
1 slot for SD/MMC
1 slot for MS
1 slot for SM/XD** Picture Card
1slot for CF/IBM Microdrive
Data exchange allowed between cards in different slots
Card Reader/Writer
Function
No driver needed under Windows ME/2000 SP4/XP
3-Port USB 2.0 Hub
Connects up to 127 USB devices through daisy-chainUSB Hub Function
Over-current detection and protection
**Not all types of Card Reader w/3-Port Hub support XD picture card. Please check the package or
the vender for the XD picture card support.
Driver Installation
● Windows 98SE
Step 1 Insert the Driver CD to your CD-ROM and connect the Card Reader w/3-Port
Hub to an USB port of your PC.
3
Step 2 Click Next to follow the wizard to install the driver for USB Hub.
Step 3 Select Search for the best driver for your device and click Next to continue.
4
Step 4 Select Floppy disk drives and click Next to continue.
Step 5 Click Next to finish the driver installation for USB Hub.
5
Step 6 The pop-up window shows This wizard searches for new drivers. Click Next
and follow the wizard to locate the driver for USB Card Reader.
Step 7 Select Search for the best driver for your device, and click Next to continue.
6
Step 8 Select Specify a location, click Browse to locate the driver shown as the
below image, and click Next to continue.
Step 9 Click Next to install.
7
Step 10 The system shows Windows has finished installing the software that your
new hardware device requires. Click Next to completely finish the
installation.
● Windows 2000
Step 1 Insert the Driver CD to your CD-ROM and connect the Card Reader w/3-Port
Hub to an USB port of your PC.
Step 2 Click Next to follow the wizard to install the driver for USB Hub.
8
Step 3 Select Search for a suitable driver for my device and click Next to go.
9
Tabla de contenidos
