gefran 650 Series Manual de usuario
LAUNCH DOCUMENT: 650 / 1250 (to distributors)
[2014/07/10]
1
1/16 & 1/8 D N P D TEMPERATURE CONTROLLERS
Models 650 - 1250
LAUNCH DOCUMENT: 650 / 1250 (to distributors)
[2014/07/10]
2
NTRODUCT ON:
This document describes the objectives and technical characteristics of the new model 650 1250 1350
family of PID temperature controllers.
The model 650 1250 1350 family is part the new generation of P D temperature controllers that Gefran is
developing with the objective of increasing its turnover in the PID controller business.
This document covers the following aspects:
Model 650 125 1350 PID temperature controllers: technical and business aspects
Markets & Applications
Product availability
High rotation codes
Price list
Possible product customization
Contacts
LAUNCH DOCUMENT: 650 / 1250 (to distributors)
[2014/07/10]
3
Technological trend
The migration from high segment functions (Performance Multifunction) to Basic and Value segments is
continuing due to the technological and competitive dynamics of the market.
The Performance and Multifunction segments confirm:
Trend to integrate in functions such as logic control, data logging, graphic operator interface, and
complex math functions in the PID controller.
Products dedicated to specific applications called application controllers
(Example: combustion control, oven controller, packaging, etc.).
•Purchase criteria for P D temperature controllers
Price, brand, local technical assistance, and installed base are the main aspects influencing the decision to
purchase controllers, but this is also strongly affected by:
Level of complexity in configuring the controller
Level of difficulty in using the controller
Special attention was paid to satisfying and resolving these last two aspects in developing Gefran’s new
generation of controllers.
LAUNCH DOCUMENT: 650 / 1250 (to distributors)
[2014/07/10]
4
•Models 650-1250 1/16 and 1/8 D N P D temperature controllers
The first family of Gefran’s New Generation of PID controllers.
They differ from competitors’ products in 4 ways:
An effective configurable operator interface, the only product in the Value segment, with
configurable messages and customizable combination of display colors.
The innovative portable Zapper configurator for immediate controller configuration even by a non
expert.
Integrated logic functions that simplify the control system by integrating multiple functions in the
PID controller.
Monitoring of energy consumption of the zone or of the equipment controlled, with the ability to
combine this data with data supplied by the controller for purposes of preventive maintenance.
Technical characteristics of the product
HW Characteristics
Model 650
Model 1250
Operator interface
Double White
-
Green LCD Display
L
CD, Triple White
-
Green
-
Amber
Display
Universal main input
TC, RTD, mA, V
TC, RTD, mA, V
Sampling time
60ms
60ms
No. digital inputs
max. 3
max. 5
No. analog inputs
1 Main + 1 SPR + 2TA
1 Main + 1 SPR + 2TA
No. relay outputs
max. 4
max. 4
No. logic o
utputs
max. 2
max. 2
No. analog outputs
max. 2 (isolated)
max. 2 (isolated)
Serial communication
RS485 Modbus
RS485 Modbus
Mechanical dimensions
1/16 D N depth 80 mm
1/8 D N depth 80 mm
nstallation
Electronic part extractable from
faceplate/Plug-in
Electronic part extractable from
faceplate/Plug-in
Thanks to the above technical and functional characteristics, the model 650 1250 1350 family can be
technologically positioned at the top of the Value segment.
LAUNCH DOCUMENT: 650 / 1250 (to distributors)
[2014/07/10]
5
•Business strategy
Strengthen Gefran’s presence in the Value segment, specifically for more complex applications
requiring a setpoint programmer, logic control functions, control of fast processes
Target sectors:
Laboratory equipment
Material test ovens
Chillers
Welding machines/ Packaging sector
•Opportunities and business strategy
Exploit the innovative and distinctive functions of the model 650 1250 1350 controllers
Completeness of range and price positioning (model 600 1200 1300 + model 650 1250 1350 )
Low market share in USA and EU: there’s room for growth
Sales network motivated by the new range of innovative products
More widespread and specialized distribution network
LAUNCH DOCUMENT: 650 / 1250 (to distributors)
[2014/07/10]
6
THE PRODUCT
Main technical characteristics
The model 650 1250 controllers are ideal for precise temperature controls, with automatic tuning
algorithms to control heating, cooling, and combinations of the two.
The LCD alphanumeric display allows generation of user configurable scrolling alphanumeric
messages for very simple operation and clarity of information for users.
The controllers develop functions such as timers, setpoint gradients, soft start, total and partial
load interrupt alarms, counters of KWh and number of operations of actuators, alarms and
diagnostics messages.
Serial communication is available in RS485, Modbus protocol.
Product configuration is extremely easy from the faceplate, from the GF_eXpress configurator, and
from an innovative portable configurator (Zapper).
The product is plug in for easy maintenance. The electronic part extracts from the faceplate.
UN QUE SELL NG PO NT
The distinctive aspects of the model 650 1250 1350 controllers are summed up by the following USPs:
1. Flex-view: This function allows the controller to be customi ed: device frame color, scrolling
alphameric messages, combination of display colors.
2. Easy setup
3. Monitoring of energy consumption, combinable with information for preventive maintenance
4. All-in-one solution with logic control blocks
LAUNCH DOCUMENT: 650 / 1250 (to distributors)
[2014/07/10]
7
TECHN CAL SUPPORT CHARACTER ST CS
1. Flex-view Display
The information on the display (colors, messages, alarms, help in line) can be customized, making the HMI
more efficient.
Choosing the color of the controller’s faceplate and the logo makes it easy to adapt to the styling of the
equipment on which it is installed.
•Operator messages are configurable
25 messages of 32 characters (Latin letters and numbers) configurable in three standard languages (other
languages on request).
They can be activated by numerous process events, such as: alarm limits attributed to the main variable, to
the setpoint, to the remote setpoint, to reading of load currents; from digital inputs, from Function Block
outputs.
LAUNCH DOCUMENT: 650 / 1250 (to distributors)
[2014/07/10]
8
•The color combination on the display can be customized
-Model 650: the standard colors of the PV SV displays are White Green. A different color combination
can be evaluated on request.
-Model 1250: the standard colors of the PV SV F displays are White Green Amber. A different color
combination can be evaluated on request.
Note
-The colors available for custom combinations of displays are white, green, and amber.
-Requests for customization of colors will be processed with the “special” products procedure.
LAUNCH DOCUMENT: 650 / 1250 (to distributors)
[2014/07/10]
9
• The variable displayed with the horizontal bargraph of the 1250 is configurable
-The bargraph facilitates interpretation of the state of a variable or of a process parameter.
-The following information can be configured:
• % power in output
• timer time
• current levels
• calculated valve position
• programmer time
• energy counter
LAUNCH DOCUMENT: 650 / 1250 (to distributors)
[2014/07/10]
10
The dimensions of the display (numbers – messages – bars) allow clear reading, even at a distance
- The luminosity of the display is adjustable with a parameter easily accessed from the device keypad,
allowing the operator’s needs to be balanced with the display’s life.
-The green LEDs for the 4 keys make using these devices more intuitive:
-they give visual feedback when the key is pressed
-they guide the user to the key to press (as for acknowledge of an alarm with latch) > indicate inactive
functions
-they signal if a key is not recogni ed (diagnostics)
•Help in Line messages (in English) for product configuration
-Over 100 scrolling messages to help with setup (help in line) that automatically provide the meaning of
the displayed parameter, making use of the programming manual no longer indispensable.
Example: tYPE > MA N NPUT TYPE OF PROBE
[Parameter] [Help in line message]
•Maximum clarity of system diagnostics messages (in English)
Example:
-Sensor broken
-Process value under Lo limit
-Process value over High Limit
-Input sensor Fail Connection
Examples:
-Alarm oven door open
-Low water level
Otros manuales para 650 Series
3
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Controladores de temperatura de gefran
