Gefen Pro GEF-MOD-848-DVI Manual de usuario
Audio
Embedder
3GSDI
Release A1
User Manual
GEF-MOD-848-DVI • GEF-MOD-848-DVIELR
GEF-MOD-848-ELR • GEF-MOD-848-DVI1FO
GEF-MOD-848-1FO • GEF-MOD-848-DPDVI
GEF-MOD-848-DPELR • GEF-MOD-848-DP1FO
88
x
DISPLAYSSOURCES
Modular
Matrix
8x8 Modular Matrix
Important Safety Instructions
ii
GENERAL SAFETY INFORMATION
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this product near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install or place this product near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. To reduce the risk of electric shock and/or damage to this product, never handle or
touch this unit or power cord if your hands are wet or damp. Do not expose this
product to rain or moisture.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
15. Batteries that may be included with this product and/or accessories should never be
exposed to open ame or excessive heat. Always dispose of used batteries
according to the instructions.
RACK MOUNT SAFETY INFORMATION
a. Maximum recommended ambient temperature: 40 ˚C (104 ˚F).
b. Increase the air ow as needed to maintain the recommended temperature
inside the rack.
c. Do not exceed maximum weight loads for the rack. Install heavier equipment in the
lower part of the rack to maintain stability.
8x8 Modular Matrix
Warranty Information
Gefen warrants the equipment it manufactures to be free from defects in material and
workmanship.
If equipment fails because of such defects and Gefen is notied within two (2) years from
the date of shipment, Gefen will, at its option, repair or replace the equipment, provided
that the equipment has not been subjected to mechanical, electrical, or other abuse or
modications. Equipment that fails under conditions other than those covered will be
repaired at the current price of parts and labor in effect at the time of repair. Such repairs
are warranted for ninety (90) days from the day of reshipment to the Buyer.
This warranty is in lieu of all other warranties expressed or implied, including without
limitation, any implied warranty or merchantability or tness for any particular purpose, all of
which are expressly disclaimed.
1. Proof of sale may be required in order to claim warranty.
2. Customers outside the US are responsible for shipping charges to and from Gefen.
3. Copper cables are limited to a 30 day warranty and cables must be in their original
condition.
The information in this manual has been carefully checked and is believed to be accurate.
However, Gefen assumes no responsibility for any inaccuracies that may be contained
in this manual. In no event will Gefen be liable for direct, indirect, special, incidental, or
consequential damages resulting from any defect or omission in this manual, even if
advised of the possibility of such damages. The technical information contained herein
regarding the features and specications is subject to change without notice.
For the latest warranty coverage information, refer to the Warranty and Return Policy under
the Support section of the Gefen Web site at www.gefen.com.
PRODUCT REGISTRATION
Please register your product online by visiting the Register Product page under the
Support section of the Gefen Web site.
iii
iv
8x8 Modular Matrix
Gefen, LLC
c/o Customer Service
20600 Nordhoff St.
Chatsworth, CA 91311
Telephone: (818) 772-9100
(800) 545-6900
Fax: (818) 772-9120
Visit us on the Web: www.gefenpro.com
Technical Support Hours: 8:00 AM to 5:00 PM Monday - Friday, Pacic Time
For 24 / 7 support, see the back of the product for the
support number
8x8 Modular Matrix is a trademark of Gefen, LLC.
Important Notice
Gefen, LLC reserves the right to make changes in the hardware, packaging, and any
accompanying documentation without prior written notice.
© 2013 Gefen, LLC. All Rights Reserved.
All trademarks are the property of their respective owners.
Contacting Gefen Technical Support
iv
vv
3GSDI Audio Embedder
• There is no internal scaling in the 8x8 Modular Matrix. All of the attached monitors
must be able to display the output resolutions of the source devices. For maximum
compatibility it is recommended that only one compatible/common resolution be used
by all of the source devices.
• Routing features can be accessed using RS-232 or IP control. See RS-232 and IP
Conguration for more information.
• The 8x8 Modular Matrix provides several different pre-congured packages to suit the
needs of your application. This User Manual covers all available congurations. See
Pre-Congured Options for information on identifying the type of 8x8 Modular Matrix
that was purchased.
Operating Notes
8x8 Modular Matrix
vi
Features
• Modular input and output card, each with eight connectors
• Supports resolutions up to 1920 x 1200
• Advanced EDID management for rapid integration of sources and displays
• RS-232 Serial interface for remote control via a computer or automation control
system
• IP port for control via built-in web server, Telnet, or UDP
• IR control via front panel sensor and rear panel IR port
• Front-panel LCD display
• Front-panel push buttons for local switching
• Routing states can be stored and recalled at the touch of a button
• Dual redundant hot-swappable power supplies
• Removable and replaceable fan and lter modules
• Output masking command
• Rack-mountable
Packing List
See Pre-Congured Options for packing list details for each pre-congured option. If any
of these items are not present in your box when you rst open it, immediately contact your
dealer or Gefen.
8x8 Modular Matrix
Features and Packing List
1080P
3GSDI Audio Embedder8x8 Modular Matrix
Table of Contents
viii
01 Getting Started
Pre-Congured Options......................................................................................... 2
Panel Layout ......................................................................................................... 6
Front Panel.................................................................................................... 6
Back Panel .................................................................................................... 7
IR Remote Control Unit ......................................................................................... 8
Front.............................................................................................................. 8
Back .............................................................................................................. 9
Installing the Battery.................................................................................... 10
Setting the IR Channel ................................................................................ 10
Installation ............................................................................................................11
Sample Wiring Diagram .............................................................................. 11
GEF-MOD-848-DVI..................................................................................... 12
GEF-MOD-848-DVIELR.............................................................................. 12
GEF-MOD-848-ELR.................................................................................... 14
GEF-MOD-848-DVI1FO.............................................................................. 16
GEF-MOD-848-1FO.................................................................................... 18
DisplayPort Package Options ..................................................................... 20
02 Operating the 8x8 Modular Matrix
Front Panel Controls ........................................................................................... 24
Front Panel Buttons .................................................................................... 24
Front Panel LCD Screen ............................................................................. 25
Displaying Matrix Settings........................................................................... 26
Routing Basics .................................................................................................... 27
Routing Inputs to Outputs ........................................................................... 27
Getting the Current Routing Status ............................................................. 29
One-to-One Routing.................................................................................... 30
Saving the Current Routing State ............................................................... 31
Recalling a Saved Routing State ................................................................ 33
Masking............................................................................................................... 35
Masking Outputs ......................................................................................... 35
Getting the Current Masking Status ............................................................ 37
Unmasking Outputs..................................................................................... 38
Locking the Matrix ............................................................................................... 40
EDID Management.............................................................................................. 41
Saving the Downstream EDID to an Input .................................................. 41
Saving the Default EDID to an Input ........................................................... 44
IR Control ............................................................................................................ 46
Routing Sources using the IR Remote Control Unit.................................... 46
Using the IR Extender ................................................................................. 47
8x8 Modular Matrix
ix
Table of Contents
03 Advanced Operation
RS-232 and IP Conguration .............................................................................. 50
RS-232 Interface ......................................................................................... 50
RS-232 Settings .......................................................................................... 50
IP / UDP Conguration................................................................................ 51
RS-232 / IP Commands ...................................................................................... 52
EDID Management...................................................................................... 52
IP / UDP Conguration................................................................................ 62
Routing and Masking .................................................................................. 70
System ........................................................................................................ 80
Web Interface ...................................................................................................... 92
Using the built-in Web Server ..................................................................... 92
Routing ► Routing...................................................................................... 93
Routing ► I/O Names ................................................................................. 98
Routing ► +5V............................................................................................ 99
Routing ► Output Masks .......................................................................... 101
Status ► In / Out....................................................................................... 103
Status ► System ...................................................................................... 104
Manage EDID ► Assign ........................................................................... 105
Manage EDID ► Bank Names ................................................................. 108
Manage EDID ► Upload / Download........................................................ 109
Conguration ► Change IP Settings ........................................................ 110
Conguration ► TCP / Telnet Terminal Login Settings ............................ 111
Conguration ► UDP Connection Settings .............................................. 112
Conguration ► Web Login Settings ........................................................ 113
Conguration ► System Conguration..................................................... 114
04 Appendix
Card Removal and Installation ...........................................................................118
Firmware Upgrade Procedure........................................................................... 121
Specications .................................................................................................... 125
8x8 Modular Matrix.................................................................................... 125
Modular Matrix 8 DVI Input Card............................................................... 126
Modular Matrix 8 DisplayPort Input Card .................................................. 126
Modular Matrix 8 ELR Input Card.............................................................. 126
DVI ELR Sender with POL ........................................................................ 127
Modular Matrix 8 FO Input Card................................................................ 127
DVI Sender over 1 FO............................................................................... 128
Modular Matrix 8 DVI Output Card............................................................ 128
Modular Matrix 8 ELR Output Card........................................................... 128
DVI ELR Receiver with POL ..................................................................... 129
Modular Matrix 8 FO Output Card............................................................. 129
DVI Receiver over 1 FO ............................................................................ 129
Otros manuales para GEF-MOD-848-DVI
1
Este manual sirve para los siguientes modelos
7
Tabla de contenidos
Otros manuales de Cambiar de Gefen Pro
