GE Digital Energy LP 11U Manual de usuario

GE Zenith Controls, Inc.

830 West 40th Street Chicago, IL 60609 / Telephone: (800) 63 -1 38 rev 9-5-2012

GE Digital Energy

Power Quality

General Electric LP11-U UPS Startup Checklist

The purpose of this startup checklist is to eliminate any problems during system startup due to

incorrect wiring or installation. It is recommended that the entire installation / user manual be

re iewed prior to installation and operation. The LP11-U UPS can be configured either by the

customer or contractor by following all safety precautions. If onsite startup support is required

for any reason, this pre-startup checklist must be completed before a GE technician can be

scheduled to perform the start up or support of the UPS system.

***Very Important Notes***

Note 1 – Battery fuse:

The GE LP11-U UPS battery fuse is located in the bag taped to the top of the UPS along with

the system manual and a jumper used to configure the output of the UPS. A sticker on the bag

states "DO NOT DISCARD". Secure the fuse and jumper in a safe location and pro ide to the

GE field engineer for system startup. Please notify GE Power Quality Ser ice immediately if the

fuse or jumper are missing. UPS cannot be started without the battery fuse.

Note 2 – UPS Input / Output: The GE LP11-U UPS is deli ered as 208 AC input and 208 AC

output unless otherwise ordered. To modify the input and output oltages there are both

mechanical and electronic modifications that must be performed.

Note 3 – External aintenance Bypass: The LP11-U UPS has an internal single phase

transformer that caused a phase shift between the input and output oltage. If an external

maintenance bypass is to be utilized, a single phase transformer must be installed in the

maintenance bypass path to compensate for this phase shift. Contact GE prior to installing an

external maintenance bypass.

Note 4 – LP11-U UPS units in parallel: Parallel units should be ordered in this configuration so

they can be tested prior to shipment to the site. If field installation is required, it is

recommended that this be performed by a qualified GE technician.

Date: _______________________ UPS Serial #s:

Company Name:

Address:

Principal contact:

Principal’s e-mail Address:

Principal’s phone number:

Installing contractor: phone #:

GE Zenith Controls, Inc.

830 West 40th Street Chicago, IL 60609 / Telephone: (800) 63 -1 38 rev 9-5-2012

GE Digital Energy

Power Quality

Y N NA

1 Verify that IMPORTANT SAFETY INSTRUCTIONS (Section 1) ha e been

re iewed.

2 Verify that the UPS is carefully unpackaged, inspected for damage, and

placed near the installation location.

3 Verify the proper size wires and circuit breakers are utilized.

4 Verify the proper input oltage installation procedures for 208-240 AC or

120 AC input are used to connect the UPS.

a. 4.4.1.1 Standard installation procedure: Vin 208-240Vac,

Vout 120/208/220/230/240Vac

b. 4.4.1.2 Installation procedure: Vin 120Vac (optional

5/6kVA), Vout 120/208/220/230/240Vac

Proper input oltage is connected to include the system ground

4 Referring to the following sections of the installation / user manual,

perform the hardware modifications required for the input oltage to be

applied.

1. 4.4.2 A ailable input oltages: hardware modifications

2. 4.4.2.1 Input oltage 208 or 240Vac

3. 4.4.2.2 Input oltage 120Vac (optional, 5/6kVA only)

5 Referring to the following sections of the installation / user manual,

perform the hardware modifications required for the output oltage

necessary for the critical load.

1. 4.4.3 A ailable output oltages: hardware modifications

2. 4.4.3.1 Output oltage 208Vac

3. 4.4.3.2 Output oltage 120Vac split-phase

4. 4.4.3.3 Output oltage 220/230/240Vac

5. 4.4.3.4 Output oltage 120Vac single phase

6 Referring to the following section of the installation / user manual, perform

the software modifications required for the input and output oltage

associated to any hardware modifications performed abo e.

4.4.4 Input / output oltages: Software modification

7 Referring to the following section of the installation / user manual, perform

the installation of the external battery pack(s).

4.4.5 Installation of GE Digital Energy LanPro-U battery extension pack(s)

8 Referring to the section 4.4.6 LanPro-11U series: 2 / 3 / 4 parallel

operating units – additional info, contact GE Power Quality ser ice with

any questions on the installation of a parallel system.

8 Referring to the section 5 of the installation / user manual, erify proper

operation of the GE LP11-U UPS.

If you ha e any questions or need to request onsite ser ice, please contact us at 800-637-1738

(Option 3).

Thank you for your business.

Otros manuales para Digital Energy LP 11U

1

Tabla de contenidos

Otros manuales de Unión Postal Universal de GE

GE

GE Digital Energy LP 33 Series Manual de usuario

GE

GE Digital Energy LP 33 Series Manual de usuario

GE

GE LanPro 11 U Manual de usuario

GE

GE Uninterruptible Power Supply Manual de usuario

GE

GE 700 VA Manual de usuario

GE

GE 8 Series Manual de usuario

GE

GE SG SERIES 10 Manual de usuario

GE

GE VH Series 700 Manual de usuario

GE

GE SG 750 UL S2 Series Manual de usuario

GE

GE SG Series 400 Manual de usuario

GE

GE VH UL series Manual de usuario

GE

GE SG Series Manual de usuario

GE

GE TLE 625 UL S2 Manual de usuario

GE

GE LP33 Series 80 Manual de usuario

GE

GE Digital Energy SitePro 400 VAC CESeries 7 Manual de usuario

GE

GE NetPro Series Manual de usuario

GE

GE GT6000 Manual de usuario

GE

GE Power Supply Manual de usuario

GE

GE Digital Energy LP 11 Manual de usuario

GE

GE TLE 160 Manual de usuario

GE

GE Lanpro 33 Manual de usuario

GE

GE On-line VH Series Manual de usuario

GE

GE Digital Energy SG Series Manual de usuario

GE

GE 400 Series Manual de usuario

Manuales populares de Unión Postal Universal de otras marcas

Pylontech

Pylontech Victron & Pylontech US5000 Manual de usuario

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manual de usuario

Mecer

Mecer ME-1000-WTU Manual de usuario

Mustek

Mustek PowerMust 530(B) Plus Manual de instalación y operación

Emerson

Emerson Liebert NXL series Manual de usuario

MAKELSAN

MAKELSAN BOXER SERIES Manual de usuario

Block

Block PC-0524-400-0 Manual de usuario

CyberPower

CyberPower CP585LCD Manual de usuario

Eaton

Eaton 3S Instrucciones de montaje

CyberPower

CyberPower Office Tower Series UPS 1000 Manual de usuario

CyberPower

CyberPower BM100 Manual de usuario

Best Power

Best Power 610 Manual de usuario

Best Power

Best Power Unity/I UT3K Manual de usuario

Mustek

Mustek PowerMust 400 Offline Manual de usuario

Xantrex

Xantrex Trace 512 UR-UPS Manual de usuario

Forza

Forza SL-1501UL Manual de usuario

LEGRAND

LEGRAND keor 310081 Manual de usuario

ABB

ABB Conceptpower DPA 500 Manual de usuario