GE RM24961 Manual de usuario

Universal

Remote Control

RM24961

INSTRUCTION

MANUAL

24961 manual/NOSPAN 12/11/03 9:33 AM Page 1

Table Of Contents

Button Description 1-2

Battery Installation 2

Programming for TV 4

Programming for DVD 5

Programming for Cable Box or Satellite 6

Programming for VCR 7

Programming for Auxillary Devices 8

Code Search 9

Retrieving Codes 10

Menu Function 11-12

Trouble Shooting 13-14

Warranty 15

Instructions in Spanish 16

CODE LIST 31

Button Description

INDICATOR LIGHT

The Indicator Light flashes to show that the

remote is working.

The button operates the same as your

original remote (note: some RCA, GE and

ProScan models require you to press the

device key to turn the device on and the key

to turn the device off).

SETUP

Used to program the remote or to search

through codes.

TV, DVD, SAT/CBL, VCR, AUX1, AUX2

These buttons are used to select the device

you want to control.They will light up when-

ever any button is pushedto signify which

device mode you are in.

REVERSE, PLAY, FORWARD, RECORD,

STOP, PAUSE

The REVERSE, PLAY, FORWARD, RECORD,

STOP and PAUSE buttons operate the same

as on your original VCR remote.You must

press the RECORD button twice to begin

recording. Buttons also control similar func-

tions for DVD and CD players.

TV•VCR

The TV•VCR button operates the TV•VCR

function of your VCR.

24961 manual/NOSPAN 12/11/03 9:33 AM Page 2

ENTER

Shows teh TV’s channel/time display.The

ENTER button is used to complete channel

selection for some brands of TV. It is also

used to complete the code entry process.

VOL & CHAN

The VOL (Volume) and CH (Channel) buttons

increase or decrease channel numbers or

volume.

MUTE

To MUTE the volume on the TV.

PREV CHAN

PREV CHAN allows you to go to the previ-

ous channel you selected. Operates the

same as Last Channel, Go Back or Recall

button on your original remote.

0-9

The number buttons operate the same as on

your original remote, and are used for enter-

ing device codes or channel numbers.

The MENU button calls up the TV and DBS

set up menus.

Navigation Buttons and OK

Used to move through on-screen menuing

and guides and to select menu options.

CLEAR

Removes the on-screen display or program

guide to return to normal viewing.

Battery Installation

Your Universal Remote requires two (2)

new AAA alkaline batteries.To install the

batteries:

1. On the back of the remote, push and

slide the cover off.

2. Match the batteries to the + and -

marks inside the battery case, then

insert the batteries.

3. Press and slide the battery cover back

into place.

Note: Programmed codes will remain in

memory for a short period of time allow-

ing for battery replacement. If batteries

have been dead for a prolonged period of

time, reprogramming may be required.

24961 manual/NOSPAN 12/11/03 9:33 AM Page 3

Button Description

24961 manual/NOSPAN 12/11/03 9:33 AM Page 4

Programming For TV

1. Manually turn on the TV.

2. Press the TV button.

It will light for

one second and

go out.

3. Press and hold the

SETUP button until

TV button stays lit,

then release the

SETUP button.

4. Find the three digit

code for your TV in

the TV code list, and

enter it using the

Number Buttons.

After your code is

entered, the

TV button light

will turn off.

5. Aim the remote at your

TV and press the

button. Your

TV should turn off.

Note: If your TV does not

respond, try all the codes

for your brand. If the codes

do not work, or your brand

is not listed, try the Code

Search method on page 9.

6. With your TV on, press

CHAN+. If the TV

responds, no further

programming is

required.

7. Enter your code here

for easy reference.

SETUP

CHAN +

123

456

789

ON•OFF

TV CODE

24961 manual/NOSPAN 12/11/03 9:33 AM Page 5

SETUP

123

456

789

ON•OFF

DVD CODE

Programming for DVD

The DVD button can be used for a DVD

player.

1. Manually turn on the

DVD player.

2. Press the DVD button.

It will light for one

second and then go out.

3. Press and hold the

SETUP button until

the DVD button remains

lit, then release

the SETUP button.

4. Find the three digit code

for your DVD player

to program in the code list

Enter the code using the

Number Buttons.

After your code is

entered, the DVD

player will turn off.

5. Aim the remote at your

device and press the

button. Your

device should turn off.

Note: If your device

does not respond, try

all the codes for your

brand. If the codes do

not work, or your brand

is not listed, try the

Code Search method

on page 9.

6. With your device on,

press CHAN+. If the

device responds,

no further program-

ming is required.

7. Enter your code here

for easy reference.

DVD

CHAN +

24961 manual/NOSPAN 12/11/03 9:33 AM Page 6

Programming For Satellite

Receiver or Cable Box

The SAT/CBL button is defaulted to

RCA/GE/ProScan DBS systems, however

other DBS systems can be programmed

to this button.

1. Manually turn on

the Satellite Receiver

or Cable Box.

2. Press the SAT/CBL button.

It will light for one

second and then go out.

3. Press and hold the

SETUP button until

the SAT/CBL button

remains lit, then release

the SETUP button.

4. Find the three digit

code for your Cable

Box or Satellite Receiver

in the code list

and enter it using

the Number Buttons.

After your code is

entered, the

SAT/CBL button

will turn off.

5. Aim the remote at

your cable box or

satellite receiver and

press the

button.

The unit should turn off.

Note: If your equipment does not

respond, try all the codes for your brand.

If the codes do not work, or your brand is

not listed, try the Code Search method on

page 9.

6. With your Cable Box

or satellite receiver

on, press CHAN+. If the

Cable Box or satellite

receiver responds,

no further program-

ming is required.

7. Enter your code here

for easy reference.

SETUP

CHAN +

123

456

789

ON•OFF

SAT/

CBL

SAT/CBL CODE

24961 manual/NOSPAN 12/11/03 9:33 AM Page 7

Programming For VCR

1. Manually turn

on the VCR.

2. Press the VCR button.

It willlight for one

second and then

go out.

3. Press and hold

the SETUP button

until the VCR button

remains lit, then

release the SETUP

button.

4. Find the three digit

code for your VCR

in the code list and

enter it using the

Number Buttons.

After your code is

entered, the VCR

button will turn off.

5. Aim the remote at

your VCR and press

the button.

Your VCR should

turn off.

Note: If your VCR does not respond, try

all the codes for your brand. If the

codes do not work, or your brand is

not listed, try the Code Search

method on page 9.

6. With your VCR on,

press CHAN+. If the

VCR responds,

no further

programming

is required.

7. Enter your code

here for easy

reference.

INDICATOR

LIGHT

SETUP

VCR

123

456

789

ON•OFF

VCR CODE

CHAN +

24961 manual/NOSPAN 12/11/03 9:33 AM Page 8

Programming for Auxillary

(AUX 1, AUX 2) Button

The Auxillary buttons can be used to

assign a second TV, VCR, DVD player,

satellite receiver or cable box, or audio

receiver/cd system.

NOTE: All device buttons (except the TV

button) can be programmed for any

device, regardless of what is indicated on

the button.

1. Manually turn on the device you wish

to program.

2. Press the Auxillary button

(AUX 1 or AUX 2) you

want to program.

3. Press and hold the

SETUP button until

the AUX button remains

lit, then release

the SETUP button.

4. Find the three digit

code for the device to

program in the code list

After your code is

entered, the device

button light will turn

off. If the code is not

valid, the device button

light will blink. Check

the code list and repeat

process.

5. Aim the remote at your

device and press the

button. Your

device should turn off.

Note: If your device does not respond, try

all the codes for your brand. If the codes

do not work, or your brand is not listed,

try the Code Search method on page 9.

6. With your device on,

press CHAN+. or

If the device responds,

no further program-

ming is required.

7. Enter your code here

for easy reference.

SETUP

123

456

789

DVD

ON•OFF

CHAN +

AUX CODE

ON•OFF

VCR

CABLE DBS

CD RCVR CD DVD

AUX

24961 manual/NOSPAN 12/11/03 9:33 AM Page 9

Programming With Code

If your TV, VCR, DVD, CD player, satel-

lite receiver, or Cable Box or audio

receiver does not respond after you

have tried all the codes for your brand,

or if your brand is not listed, try

searching for your code by following

the steps below.

1. Turn on the device you wish to

program.

2. Press the device

button for which

you are trying

to program.

3. Press and hold

SETUP until the

device button lights,

then release SETUP.

4. Press and release

until your

device turns off.

Important: You may have to press

ON•OFF up to 300 times.

5. When your device

turns off, press the

ENTER button, the

INDICATOR LIGHT

will go off.

SETUP

ENTER

DVD

SAT/

CBL

VCR

AUX 1

AUX 2

ON•OFF

24961 manual/NOSPAN 12/11/03 9:33 AM Page 10

Otros manuales para RM24961

Tabla de contenidos

Manuales populares de Control remoto universal de otras marcas

Pronto

Pronto Peel Manual de usuario

Radio Shack

Radio Shack Wireless Remote Control System Manual de usuario

AUVIO

AUVIO Universal Home Theater Remote Manual de usuario

Philips

Philips Icon SRU4106 Manual de usuario

THOMSON

THOMSON ROC4309 Manual de usuario

Philips

Philips pm625S Manual de usuario

RCA

RCA RCU600WMS - Universal Remote Control Manual de usuario

Blackweb

Blackweb BWB17AV002 Manual de usuario

Marmitek

Marmitek DoorGuard 300 Manual de usuario

Chunghop

Chunghop RM-L618 Manual de usuario

Anderic

Anderic KTN828 Manual de usuario

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Manual de usuario

Medion

Medion E74023 Manual de usuario

intensity

intensity RM02A Manual de usuario

Sky

Sky MY Manual de usuario

RCA

RCA RCU600M - Universal Remote Control Manual de usuario

Savant

Savant SUR-0500 Guía de referencia rápida

GDI

GDI GDI-WT2K Manual de usuario