GE 45238 - Jasco Wireless Decoy Security Cam Manual de usuario

For indoor/outdoor use. Do not use in wet locations. www.jascoproducts.com

45238

Home Monitoring

Decoy Security Camera

User Manual

Thank you for purchasing the GE 45238 Decoy Security

Camera. This product is not intended to replace an

actual surveillance system; it can provide the illuson

that a wireless surveillance system is present. It can

also be used to suplement an existing system, providing

a greater security presence. Please review these

instructions carefully before attempting to operate the

device.

PRODUCT FEATURES

• This decoy camera’s authentic

appearance is designed to look

like it’s part of a wireless video

surveillance system

• Add it to existing systems to

increase security presence

• Unique axis-swivel mount

allows for surface or wall

installation

• Activate or deactivate with

a convenient on/off switch

• Flashing red LED draws

attention to the camera

• Requires 2 AAA batteries (not

included); batteries last up to

12 months

• For Indoor/Outdoor use

PACKAGE CONTENTS

Please check and identify all the parts before

proceeding with the installation.

1. 45238 Decoy Security Camera

2. Wall mounting hardware

3. Battery Pack

CHOOSING A CAMERA MOUNTING LOCATION

The 45238 Decoy Security Camera can be positioned on

a desktop, or mounted to a wall. It is suitable for indoor

or outdoor use. When choosing a mounting location,

please be advised:

• Do not use in wet locations. If using outdoors, position

the decoy camera in a sheltered area.

• Select a location for the decoy camera that is easily

visable by potential intruders, but out of reach.

• Point camera and LED towards the area of concern so

that the ﬂashing light is easily visable.

INSTALLING THE BATTERIES

1. Separate the battery

pack from the camera.

2. Remove the 4 screws

located on the bottom of

the battery pack.

3. Remove the camera

mounting plate.

4. Install two new "AA" alkaline batteries according to

the polarity markings.

5. Reinstall the mounting plate and screws.

INSTALLATION

Desktop Mount:

1. Place camera in desired location

on a ﬂat surface.

2. Set switch on camera to "ON"

position.

3. Position camera front with

ﬂashing LED so that it is easily

visible.

Wall Mount:

1. Select an ideal location. Using the template

diagram, drill two 3/16” holes in the

desired mounting location, and install

the two wall anchors (included) into

the holes, or screw

directly into a wall

stud. Make

sure the

screw heads

protrude

slightly from

the wall to

allow the camera to

mount.

2. Secure the decoy camera to the wall by ﬁtting the

mounting slots on the back of the camera onto the

screwheads in the wall.

3. Set ON/OFF switch on the battery to "ON" position.

Slide the camera onto the locking pins of the

battery pack.

4. Adjust antenna and camera angle

as desired.

TROUBLE SHOOTING

If you are having trouble operating this product, please

see below. If you have any questions or feel the decoy

camera is not operating correctly, or you simply need

additional information, please visit our web site

www.jascoproducts.com or contact technical support

at 1-800-654-8483

No ﬂashing LED

1. Check battery installation. Make batteries match the

polarity diagrams located in the battery pack.

Caution

Requires 2 "AAA" cells. Observe polarity markings (+), (-).

-Batteries may leak harmful liquids or ignitable materials or explode

causing injury and product damage.

-Do not mix old and new or other battery types.

-Replace all batteries at the same time.

-Replace exhausted batteries immediately.

-Remove batteries if product is to be unused for extended periods

of time.

WARRANTY

ONE-YEAR LIMITED WARRANTY: Jasco Products Company warrants this product

to be free from manufacturing defects for a period of one year from the original

date of consumer purchase. This warranty is limited to the repair or replacement

of this product only and does not extend to consequential or incidental damage

to other products that may be used with this unit. This warranty is in lieu of all

other warranties express or implied. Some states do not allow limitations on how

long an implied warranty lasts or permit the exclusion or limitation of incidental

or consequential damages, so the above limitations may not apply to you. This

warranty gives you speciﬁc rights, and you may also have other rights which

vary from state to state. If unit should prove defective within the warranty period,

return prepaid with dated proof of purchase to:

Jasco Products Company, 10 E. Memorial Road, Oklahoma City, OK 73114

Made in China

is a trademark of General Electric Company

and is used under license to Jasco Products Company LLC,

10 E. Memorial Road, Oklahoma City, OK 73114

www.jascoproducts.com

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara de seguridad de GE

GE 16X PTZ Manual de usuario

GE Interlogix KTC-115CC Manual de usuario

GE CyberDome II Manual de usuario

GE DR-1200 Manual de usuario

GE Security Lend Camera Manual de usuario

GE UVD-XP3DNR Manual de usuario

GE IDP-1111 Manual de usuario

GE CyberDome Series Manual de usuario

GE PTZ 12X Manual de usuario

GE 45234 Manual de usuario

GE TruVision TVC-SDC2-HR Manual de usuario

GE 45238 Manual de usuario

GE UVD-XP3DNR(-P) Manual de usuario

GE KTC-810C Manual de usuario

GE KTC-CBH24 Manual de usuario

GE KTC-117V3, KTC-117V9 Manual de usuario

GE 45231 Manual de usuario

GE UVD-IP-EVRDNR Manual de usuario

GE PI-450 Manual de usuario

GE Legend IP Manual de usuario

GE TruVision TVD Series Instrucciones de montaje

GE UVD-EVRDNR(-P) Manual de usuario

GE Add-on Wireless Color Digital Camera Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario