GE Profile Advantium SCB2001KSS Manual
Note: Cabinets installed adjacent to wall ovens must have an
adhesion spec of at least a 194°F temperature rating.
Most 30" Wall Cabinets can be used with this unit.
Note: 2" minimum between cutouts when installed above
warming drawer or single wall oven.
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
For answers to your Monogram,® GE Profile™or
GE®appliance questions, visit our website at
ge.com or call GE Answer Center®service,
800.626.2000.
Listed by
Underwriters
Laboratories
SCB2001K
GE Profile Advantium®Wall Oven
Advantium_Install_dim.eps
Cutout width
28-1/2"
30
Required
cutout location
36-3/4"
minimum
from floor
Junction
box
location
A=Allow 1" overlap of oven over top and bottom edges of cutout.
B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.
4-3/16
21"
Cutout height
AB
19"
Cutout depth
29-25/32
21-7/8
15-27/32"
Excluding
Handle
Advantium Wall Oven Dimensions (in inches)and
Cabinet Installation (in inches)
Note: Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.
Construct Solid
Bottom Min.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
Conduit
(48-1/2"
long)
AAllow 1" overlap of oven over top and bottom edges of cutout
BAllow 11/16"-3/4" for overlap of oven over side edges of cutout
240440
Specification Revised 2/07
Dimensions and Installation Information (in inches)
Listed by
Underwriters
Laboratories
For answers to your Monogram,® GE Profile™or
GE®appliance questions, visit our website at
ge.com or call GE Answer Center®service,
800.626.2000.
SCB2001K
GE Profile Advantium®Wall Oven
Single
Speedcook Installation
Speedcook Oven Installation
above a single GE Built-In Wall Oven
Speedcook Oven Installation
above a GE Warming Drawer
36-3/4 Min.
Required
30
19
Min
Construct Solid
Bottom Min. 3/8"
Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides
28-1/2
21
530Dia3
36-3/4 Min.
530Dia13
30
24
Min.
Construct Solid
Bottom Min. 3/8"
Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides
2 Min.
Install
2 x 4 or 2 x 2
Runners or
Solid Bottom,
Must Support
100 lbs.
28-1/2
21
9-1/4
*45-1/
4
530Dia4
30
24
Min.
Construct Solid
Bottom Min. 3/8"
Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides
2 Min.
Per Oven
Requirement
28-1/2
21
240440
Specification Revised 2/07
Dimensions and Installation Information (in inches)
Order a 30” wide single oven cabinet or cut the
opening in a wall to dimensions shown.
Note: The rough opening must be:
• Depth – 19” Min.
• Width – 28-1/2” Min.
• Height – 21” Min.
• 36-3/4” from the floor to the cutout is required.
• These ovens require 3/4” overlap on each side,
top and bottom of the cutout.
• Oven overlaps will conceal cut edges on all sides
of the opening.
Note: For installation above a warming drawer
additional clearance between the two cutouts
may be required. Check to be sure the oven
supports above the Warming Drawer location
do not obstruct the required interior 23-1/2” depth
and 9-1/4” height.
Installation Information: Before installing, consult
installation instructions packed with product for
current dimensional data.
Features and Benefits
• Speedcook Technology – Delivers oven-quality food up to eight times faster than
a conventional oven
• Multiple Cooking Modes – Bakes, broils, browns, roasts, microwaves and grills fast,
with no preheating
• Over 100 Pre-Programmed Menu Items, Manual Cook, Help and Demo Modes
• Sensor Cooking Controls – Automatically adjust the time and power for exceptional
cooking results
• Auto and Time Defrost – Automatically defrosts for a specified amount of time
• Halogen Interior Light – Helps you monitor food as it cooks
• Two-Line Bilingual Scrolling Display – Provides helpful cooking tips and oven-use
instructions in easy-to-read English or Spanish
• Stainless Steel Interior – Durable surface that cleans quickly with a simple wipe
of the towel
• Model SCB2001KSS – Stainless steel
SCB2001K
GE Profile Advantium®Wall Oven
240440
Specification Revised 2/07
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Horno de GE
GE
GE Profile PT956 Manual
GE
GE JTP75DPBB Manual
GE
GE Monogram ZEK737WW Manual de usuario
GE
GE JKS05BABB Manual de usuario
GE
GE Profile Advantium PSA1200 Manual de usuario
GE
GE JK1000 Manual de usuario
GE
GE JGRP20WEJWWGE Manual de usuario
GE
GE JCB865 Manual de usuario
GE
GE Advantium Series PSA9120 Manual de usuario
GE
GE PCK916 Manual de usuario
GE
GE JRS25 Manual de funcionamiento
GE
GE GE Profile JTP17SCSS Manual
GE
GE JTP86 Manual de usuario
GE
GE JKP90SPSS Manual
GE
GE JK3000DF3WW Manual de usuario
GE
GE JKS10SPSS Manual
GE
GE CT9070 Manual de usuario
GE
GE JTP16 Manual de usuario
GE
GE JRP28SKSS - 24" Double Electric Wall Oven Manual
GE
GE Monogram Advantium ZSC1201 Manual de usuario
