GE ACT17CWA Manual de usuario

Table of Contents

Parts and Functions

Interface Display ....................................1

Icons .............................................2

Dip Switch .........................................4

Operation

Mode Key .........................................6

Fan Key ...............................................6

Temperature Adjustment Keys .........................7

Special Function

Special Function Selection ............................8

Installer Settings

Adjust ECO Parameters .............................10

Child Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Lock Settings......................................11

Fahrenheit / Celsius ................................11

Temperature Compensation ..........................12

Forced Defrost/Cooling/Heating .......................12

Error Checks ......................................13

Mode Restriction ..................................14

Mode Combination Settings ..........................15

Wiring Instruction...................................15

Wired Controller

Installation and Operation Manual

ACT17CWA

• Please read this manual before use

• Please keep this manual for future reference. 49-5000395 Rev. 7

GEA 01-22

SUB

MAIN

Full Display

Parts and Functions

Interface Display

Room temperature display

(dip switch SW1-2 on).

Set temperature display

Filter

HRV (Heat Reclaim Ventilation), if HRV

function is set, it will display this icon

Error icon displays detected fault

ECO mode on

Central/lock when connected to a central

controller

UP/DOWN louver swing

LEFT/RIGHT louver swing

Child lock on

Parts and Functions

Icons

MAIN / SUB Main / Subordinate wired

controller

Quiet Fan Speed

(some models)

Low Fan Speed

Medium Fan Speed

High Fan Speed

Turbo Fan Speed

(some models)

Auto Fan speed is indicated by the display automatically

stepping from low to high repeatedly.

Auto Mode

Cooling Mode

Heating Mode

Fan Mode

Parts And Functions

Dip switch denition

Dip Switch SW1

Dip Switch

SW1 ON OFF Default

Sw1-1 Subordinate wired

controller

Main wired controller OFF

Sw1-2 Room temperature

display on

Room temperature

display o󰀨 OFF

Sw1-3

Room temperature

collected from indoor unit

Room temperature

collected from controller OFF

Sw1-4 System remains o󰀨 after

power loss

Auto restart after power

loss OFF

Sw1-5 Old protocol (models

developed before Aug.

2013)

New protocol OFF

Sw1-6 Backlight always on

Backlight 15 second auto

time out

OFF

Sw1-7 Reserved Reserved OFF

Sw1-8 Reserved Reserved OFF

Dip Switch SW2

Initialization

When the mini-split system is powered on 88.8 will ash be-

tween the Room Temperature display and the Set Temperature

display until communication is established with the indoor unit.

Press to power ON or power OFF the control. A tone

will be heard with every button press or when a command is

received by a remote control. If a conicting command is re-

ceived, then the tone will sound 3 times.

Audible Alert

Dip Switch

SW2 ON OFF Default

Sw2-1 Mode Lock Normal OFF

Sw2-2

No button conrmation tone. (Tone will

still sound when command is sent by

wireless remote.

Tone on OFF

Sw2-3 Reserved Reserved OFF

Sw2-4 Reserved Reserved OFF

Quiet Fan Speed

(some models)

Low Fan Speed

Medium Fan Speed

High Fan Speed

Turbo Fan Speed

(some models)

Mode key:

•

Each press of the MODE button will change the operating mode from

Auto – Cool – Heat – Fan – Dry (Dehumidication) – Auto …

• Each mode has its initial default fan speed.

Mode Key / Fan Key

Mode Fan speed Temperature

Auto Auto 76°F

Cool High 76°F

Heat Auto 76°F

Fan Low No temperature display

Dry (Dehumidication) Auto 76°F

Initial

State

Fan Key:

Each press of the FAN button will change the fan speed from

Auto – Quiet (some models) – Low – Medium – High – Turbo

(some models) – Auto …

Temperature Adjustment Keys: /

• Press the TEMP+ or TEMP- keys to change the temperature

by 1°F increments.

• The temperature set point range for Auto, Cooling, Heating

and Dry (Dehumidication) is 60°F~86°F (If ECO is on,

then temperature range will change per the ECO setting

parameters).

• The temperature is set independently under Auto, Cooling,

Heating and Dehumidify modes. Once the temperature is set

in each mode the setting will be saved for that mode.

• In fan mode, Temp +/- keys do not work.

Temperature

Special Function Selection:

With the control powered on, press and hold the TEMP+ for

5 seconds to enter the special function menu. All the special

function icons will display. Use the TEMP+ and TEMP- buttons

to move between icons. Use FAN button to select function.

Function Selection

Full display

Function Selection

Otros manuales para ACT17CWA

Tabla de contenidos

Idiomas:

Otros manuales de Controladores de GE

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario