GE JASCO 32563 Manual de usuario
32563 PRODUCT SPECIFICATIONS
Specications
Power: 1 x CR2 Battery
Signal Frequency: 908.4/916
Range: Up to 150 feet from controller or closest Z-Wave device
Operating Temperature: 32-104° F (0-40° C)
Warranty: 2-year limited product warranty
For indoor use only.
GE Z-Wave Hinge Pin
Smart Door Sensor
www.byjasco.com 1
Design Features
· Adjustable for left and right
opening doors
· Adjusts to t door trim to
avoid false triggering
· Fits up to 5/16” removable
hinge pin diameter
· Molded color scuff resistant
tip avoids wear marks on door
· Can be mounted to bottom
hinge for maximum
concealment
· Remote Monitoring*
Monitor doors from a
distance with smartphones
or tablets
· Trigger Automations
Activate scenes or lights when
door is opened or closed
· Sends Alerts
Be notied when activity is
detected
· Color-Matching Kits Available
Paintable/Silver/Dark Brown
· OTA (Over-the-Air)
Updateable Utilizes the
Z-Wave Firmware Update
Meta Data command class
for standardized wireless
rmware updates
· Visit http://www.ezzwave.com/
hubs/ for hub compatibility
· Trilingual Instruction manual –
(English, French, Spanish)
Z-Wave Plus Features
·Works with Z-Wave Classic
and Z-Wave Plus Products
· 50% more wireless range
· 250% faster processor
· 400% more memory
· 50% more energy efcient
· Supports wireless upgrades
to future-proof your home
* Requires Z-Wave hub or controller,
functions may vary depending on brand.
32563 PRODUCT SPECIFICATIONS
www.byjasco.com 2
Related GE Z-Wave Products Color Matching Kits
35260
Silver
34193
Portable Smart
Motion Sensor
26931
In-Wall Smart
Motion Switch
35931
Smart LED
Bulb
26933
In-Wall Smart
Motion Dimmer
35257
Paintable
35259
Dark Brown
Compliances, specications and availability are
subject to change without notice
Distributed by Jasco Products Company LLC
10 E. Memorial Rd., Oklahoma City, OK
©Jasco 2018
Device Conguration
Adding your device to a Z-Wave network
Once the hub is ready to add your smart door sensor, press
and release button on the smart door sensor to add it
in the network.
To remove and reset the device
Once the controller is ready to remove your device, press and
release the button on the smart door sensor to remove it from
the network.
To return to factory defaults
Press the button 10 times quickly. LED will blink approximately 8
times to signal a successful reset.
Certications & Compliances
Adjusts for door trim
Reversible for right and
left door openings
Program button
CR2 battery included
(reverse)
Up to 2 years battery life
Otros manuales de Accesorios de GE
GE
GE TX-6211-03-1 Manual de usuario
GE
GE RSEN-WLV Manual de servicio
GE
GE WIR-10-DR-G-D-W Manual de usuario
GE
GE 19297 Manual de usuario
GE
GE Giraffe Manual de usuario
GE
GE TX-1211-03-1 Manual de usuario
GE
GE Learn Mode Shock Sensor Manual de usuario
GE
GE Monogram ZBD7005GII Manual de usuario
GE
GE WR72X10313 Guía de configuración
GE
GE PDW7800N00CC Manual de usuario
GE
GE 19234 Manual de usuario
GE
GE AP450 Manual de usuario
GE
GE 19297 Manual de usuario
GE
GE WIR-10-SR-G-D-W Manual de usuario
GE
GE ZW6305 Manual de usuario
GE
GE 868 GEN2 Manual de usuario
GE
GE GE616 Manual de usuario
GE
GE ZKHCSS2 Manual de usuario
GE
GE 45130 Manual de usuario
GE
GE Telaire Ventostat 8001 Manual de usuario
