GCAN GC-2008 Manual de usuario
GC-2008
8-channel digital output module (PNP)
User manual
Document version 3.02（2020/10/27）
Vhandy technology GCAN-2008 user manual
Revision History
Version
Date
Reason
V1.00
2015/09/16
Create
V2.01
2015/12/20
Modify device parameters
V3.01
2017/10/22
Add parameters
V3.02
2020/10/27
Modify device appearance picture
Vhandy technology GCAN-2008 user manual
Contents
1. Introduction ..............................................................................................................4
1.1 Overview ........................................................................................................4
1.2 Properties at a glance ..................................................................................... 4
1.3 Typical application ........................................................................................ 4
2. Installation ............................................................................................................... 5
2.1 Module fixing ................................................................................................ 5
2.2 Wiring method ............................................................................................... 5
2.3 System statusindicator ................................................................................... 7
2.4 Combined with GCAN-PLC-400/510series .................................................. 7
2.5 Combined with GCAN- 8000series ...............................................................8
3. Technical Specifications .......................................................................................... 9
4. Disclaimer ..............................................................................................................10
5. Module selection table ........................................................................................... 11
Sales and service ........................................................................................................13
Vhandy technology GCAN-2008 user manual
1. Introduction
1.1 Overview
The GC-2008 module has integrated 8 digital output channels, which acquires
digital signals in real-time and transmits them to the GCAN-PLC coupler. This
module can be used with any other GC Series IO module to capture and process
digital data in industrial automation or distributed control systems.
1.2 Properties at a glance
●8 output channels
●Nominal voltage: 24V DC(±20%)
●Load types are resistive load, inductive load, lamp load;
●Maximum output current:500mA
●Electrical isolation: 500 V(GC-bus)
●Current consumption:120mA
●The bit width output in the process image is 1byte
●No address setting, configuration via bus coupler or controller
●Operating temperature: -40°C ~+85°C
●Size: 100mm*69mm*12mm
1.3 Typical application
●According to the bus coupler or controller output digital signal.
Vhandy technology GCAN-2008 user manual
2. Installation
This chapter will describe the installation method, wiring method, meaning of
the indicator and meaning of the interface of the GC-2008 module.
2.1 Module fixing
The installation method of GC-2008 module as shown in Figure 2.1 and a flat-
blade screwdriver is needed for auxiliary installation.
Figure 2.1 Installation of GC-2008 module
First install the GCAN-PLC on the guide rail and plug the GC-2008 along
GCAN-PLC's right side until the lock is stuck. When remove the GC-2008, the user
need to release the self-locking mechanism by pulling out the orange label.
2.2 Wiring method
The power wiring as shown in figure 2.2. First, use a flat-blade screwdriver to
insert into the square hole, hold the top edge of the metal sheet in the square hole, and
press toward the hole. Then, insert the wire into the hole. After plugging in, pull out
the screwdriver and the wire can be firmly locked in the hole.
Vhandy technology GCAN-2008 user manual
Figure 2.2 Wiring method of GC-2008 module
Figure 2.3 GC-2008 module terminal definition
Vhandy technology GCAN-2008 user manual
Terminal
No.
Definition
output1
1
Digital output 1
output2
2
Digital output 2
output3
3
Digital output 3
output4
4
Digital output 4
output5
5
Digital output 5
output6
6
Digital output 6
output7
7
Digital output 7
output8
8
Digital output 8
Table 2.1 GC-2008 module indicator
Note: When using, please connect digital output signal to the terminal of GC-2008
and connect the reference ground to the negative power supply of GCAN-PLC-400 or
GCAN-IO-8000/8100 modules (corresponding to pins 5 and 6).
2.3 System statusindicator
Indicators
Definition
1
Digital output1 is valid.
2
Digital output 2 is valid.
3
Digital output 3 is valid.
4
Digital output 4 is valid.
5
Digital output 5 is valid.
6
Digital output 6 is valid.
7
Digital output 7 is valid.
8
Digital output 8 is valid.
Table 2.2
The GC-2008 module has no error indicator. The user can determine the status
through the "IO RUN" and "IO ERR" indicators of the GCAN-PLC. If the "IO ERR"
indicator of the GCAN-PLC lights up, it indicates that the IO module is not working
properly. Please check the module installation.
2.4 Combined with GCAN-PLC-400/510series
When using with GCAN-PLC-400/510, GC series IO modules shall be
configured in the order of DI, DO, AI and AO, and the same type of modules shall be
put together.GCAN-PLC-400/510 supports programming in five languages. The
following is an example of ST language showing how to program GCAN-PLC-400 to
read the state of digital output of GC-2008 module.
In the process of ST programming definition, gc-2008 module needs to define
variable type, output signal position, start character, delimiter and so on.
Vhandy technology GCAN-2008 user manual
For example: "DI0 AT%I0.0:BOOL;"
"0.0"represents the position of the output point,and"0.0"~"0.7"respectivelydefinethe
1-8 output points in the first GC-2008 module. When the user uses more thanone
gc-2008 module, the second gc-2008 shall be defined from "1.0" to "1.7", and so on.
"%" (percent sign) is the direct variable starter; ":" (colon) is the variable or type
separator.
The Boolean is read from the %I0.0 address using the symbol variable DI0. AT
represents the address of the variable access and the additional attribute of the variable.
2.5 Combined with GCAN- 8000series
The state of the digital output is represented by one byte, with channel 8 in the
high and channel 1 in the low.
For example, when GCAN-8000 module node number is 1, the output state of
channel 8 and channel 4 of the first GC-2008 module is logic "1", and the output state
of other channels is logic "0", the CAN data frame ID sent by the GCAN-IO-8000
module is 0x181,the data length(DLC) is 8, and the frame data is 0x88, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00.Please note that when only one GCAN-2008 module is
inserted, only the first byte of the frame data is valid. The table below lists two
common DI states and their corresponding status data.
DI status
Channel
8
7
6
5
4
3
2
1
Status
1
0
0
0
1
0
0
0
CAN bus data
88
DI status
Channel
8
7
6
5
4
3
2
1
Status
0
1
0
1
1
0
1
0
CAN bus data
5A
Table 2.3
Vhandy technology GCAN-2008 user manual
3. Technical Specifications
Interface characteristics
Number of outputs
8
Load types
resistive load, inductive load, lamp load;
Nominal voltage
24V DC(±20%)
output current (Max.)
500mA
Electrical isolation
500 V（GC-bus/ Signal voltage）
Current consumption
120mA
Bit width
in the process image
output 1 byte
Installation position
In sequential order
Power supply
Powered by GCAN-PLC, current consumption
100mA
Environmental testing
Operating temperature
-40℃~+85℃
Permissible relative
humidity
95%RH，no condensation
EMC test
EN 55024:2011-09
EN 55022:2011-12
Vibration/shock
resistance
EN 60068-2-6/EN 60068-2-27/29
EMC resistance burst/
ESD
EN 61000-6-2 /EN 61000-6-4
Protection class
IP 20
Basic information
Dimensions
100mm *69mm *12mm
Weight
50g
Vhandy technology GCAN-2008 user manual
4. Disclaimer
Thank you for purchasing GCAN's GCAN series of hardware and software
products. GCAN is a registered trademark of Shenyang Vhandy Technology Co., Ltd.
This product and manual are copyrighted by Vhandy Technology. Without permission,
it is not allowed to reproduce in any form. Before using, please read this statement
carefully. Once used, it is deemed to be an endorsement and acceptance of the entire
content of this statement. Please strictly abide by the manual, product description and
related laws, regulations, policies and guidelines to install and use the product. In the
process of using the product, the user promises to be responsible for his actions and
all consequences arising therefrom. Vhandy Technology will not be liable for any
losses caused by improper use, installation, or modification by users.
The final interpretation right of the disclaimer belongs to Vhandy Technology
Tabla de contenidos
Otros manuales de Unidad de control de GCAN
GCAN
GCAN GC-1502 Manual de usuario
GCAN
GCAN GC-4662 Manual de usuario
GCAN
GCAN GC-3822 Manual de usuario
GCAN
GCAN GC-2018 Manual de usuario
GCAN
GCAN GC-4642 Manual de usuario
GCAN
GCAN GC-2302 Manual de usuario
GCAN
GCAN GC-1008 Manual de usuario
GCAN
GCAN GC-4622 Manual de usuario
GCAN
GCAN GC-6501 Manual de usuario
GCAN
GCAN GC-1008 Manual de usuario
Manuales populares de Unidad de control de otras marcas
Festo
Festo Compact Performance CP-FB6-E Manual de lista de piezas
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manual de usuario
JS Automation
JS Automation MPC3034A Manual de usuario
JAUDT
JAUDT SW GII 6406 Series Guía rápida
Spektrum
Spektrum Air Module System Manual de usuario
BOC Edwards
BOC Edwards Q Series Manual de usuario
