Garmin FUSION Apollo MS-WB670 Manual de usuario
FUSION®
Apollo™MS-WB670
OWNER’S MANUAL
ENGLISH
© 2020 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or
improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to
www.fusionentertainment.com for current updates and supplemental information concerning the use of this product.
Garmin®, ANT®, Fusion®, and the Fusion logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Apollo™, Fusion-Link™, Fusion-Link Lite™,
and Fusion PartyBus™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.
Apple® and AirPlay® are trademarks of Apple Inc., registered in the U.S. and other countries. App StoreSM is a service mark of Apple Inc. Android™ and Google Play™ are trademarks of
Google Inc. Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. NMEA®, NMEA 2000®, and the NMEA 2000
logo are registered trademarks of the National Marine Electronics Association. All rights reserved. SiriusXM®, SportsFlash™, TuneMix™, TuneStart™, and all related marks and logos
are trademarks of Sirius XM Radio Inc. All rights reserved. Wi‑Fi® is a registered mark of Wi-Fi Alliance Corporation. Other trademarks and trade names are those of their respective
owners.
M/N: A03924
IC: 1792A-03924
Table of Contents
Getting Started 1
Stereo Buttons and Status LEDs 1
Controls 2
Entering Text 3
Using the Dial to Select Items 3
Stereo Screen 4
Naming the Device 4
Setting the Home Zone 4
Selecting a Source 5
Audio Control 5
Adjusting the Volume 5
Muting all Connected Stereos 5
Adjusting the Subwoofer Level 5
Adjusting the Tone 5
Disabling the Loud Setting for a
Zone 6
Adjusting the Gain for an Auxiliary
Device 6
Speaker Zones 6
DSP Settings 6
Configuring the DSP Settings 6
Automatic Volume Adjustment Based on
Speed 7
Media Player Connection 7
Bluetooth Device Playback 7
Connecting a Compatible Bluetooth
Device 8
Bluetooth Range Information 8
Selecting a Different Bluetooth
Device 8
Bluetooth Source Menu and
Settings 9
Disabling Bluetooth Auto
Connection 9
USB Device Playback 10
USB Device Compatibility 10
Connecting a USB Device 10
Controlling Music Playback on a USB
Flash Drive or Media Player 11
Controlling Music Playback on a
Connected Android Device 11
Controlling Music Playback on a
Connected Apple Device 11
USB Source Settings 11
Radio 12
Setting the Tuner Region 12
Changing the Radio Station 12
Apple AirPlay 13
Connecting an Apple Device Using
AirPlay 13
Setting an AirPlay Password 13
UPnP Playback 13
Connecting a UPnP Device 13
Connecting an Auxiliary Device 14
Optical Audio Connection 14
SiriusXM Satellite Radio 14
Setting the Tuner Region for the
SiriusXM Source 14
Locating the SiriusXM Radio ID 14
Activating a SiriusXM Subscription 15
Selecting a Category 15
Using Replay Mode 15
Alerts 15
Adding an Artist or Song Alert 15
Adding Teams for Game Alerts 16
Adding Teams from a Live
Game 16
Viewing Active Alerts 16
Managing Alerts 16
TuneMix™ Feature 16
Starting and Stopping a TuneMix
Collection 17
Creating and Customizing a TuneMix
Collection 17
SportsFlash Feature 17
Adding Teams to Receive
SportsFlash Alerts 17
Changing SportsFlash Team
Priority 17
Enabling the TuneStart™ Feature 18
Parental Controls 18
Unlocking the Parental Controls 18
Table of Contents i
Locking Channels 18
Clearing All Locked Channels 18
Changing the Parental Control Passcode 18
SiriusXM Troubleshooting 19
Clearing SiriusXM Data 19
DAB Playback 20
Setting the Tuner Region 20
Scanning for DAB Stations 20
Changing DAB Stations 20
Selecting a DAB Station from a List 20
Selecting a DAB Station from a Category 20
Presets 21
Saving a Station or Channel as a Preset 21
Selecting a Preset from a List 21
Removing Presets 21
Fusion PartyBus Networking 21
Creating a Group 22
Editing a Group 22
Leaving a Group 22
Grouped Stereo Functions 22
Grouped Stereo Source Considerations 23
General Settings 23
Speaker Zone Settings 24
Disabling the Internal Amplifier 24
Setting the Home Zone 24
Synchronizing the Source and Zone Volume Levels 24
Adjusting the Power-On Volume Limit 24
Maintaining Individual Zone Volume Levels 25
Enabling Automatic Volume Adjustment Based on Speed 25
Automatic Volume Control Settings 25
Disabling a Zone 26
Setting a Zone Name 26
Linking Zones 26
Enabling Volume Control of Zone 3 or 4 from a Connected Amplifier 27
Adjusting the Subwoofer Filter 27
Adjusting Additional Audio Settings for a Zone 27
Source Settings 28
Network Settings 28
Setting the Stereo as the DHCP Server 28
Setting a Static IP Address 29
DHCP Settings 29
Configuring the Stereo for use with a Garmin Marine Network 29
Resetting Network Settings 29
ii Table of Contents
Update Options 30
Additional Stereo Control Options 30
Connecting to a Garmin Watch 30
Connecting to an ARX70 Remote Control 31
Fusion-Link Wireless Remote Control App 31
FUSION-Link™ Network Technology 31
NMEA 2000 Information 31
Appendix 32
Registering Your Fusion Device 32
Cleaning the Device 32
Software Updates 32
Updating the Software Using a USB Flash Drive 32
Updating the Software Using the Fusion Link App 33
Troubleshooting 33
The stereo does not respond to key presses 33
My Bluetooth audio is interrupted by short breaks 33
The stereo does not display all song information from my Bluetooth source 33
Network Troubleshooting 34
Network Status Icons 34
The stereo keeps locking up when connected to an Apple device 34
The stereo is not finding my connected Apple device 34
My Apple AirPlay audio is interrupted by short breaks 34
Specifications 35
Stereo Dimension Drawings 36
Side Dimensions 36
Top Dimensions 36
Index 37
Table of Contents iii
Getting Started
WARNING
See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
Stereo Buttons and Status LEDs
Because this device is designed to be installed in a location that may not be easily accessible, almost all
playback and device interaction is done through a network-connected remote control, stereo, or chartplotter. In
some instances, you may need to watch the LEDs or press the buttons on the device itself.
Stereo Buttons
Press to turn on the stereo.
Press and hold for two seconds to turn off the stereo.
Press and hold for ten seconds to restart the stereo.
Press to make the stereo discoverable to BLUETOOTH® devices.
and Press and hold both buttons together for ten seconds to reset the stereo to factory settings.
Status LEDs
Icon LED Activity LED Status
Solid The stereo is receiving power.
Blinking The stereo is turning on.
Solid The stereo is on and operating normally.
Off The stereo is off.
Blinking The stereo is communicating using Ethernet.
Blinking The stereo is discoverable to BLUETOOTH devices.
Solid The stereo is connected to a BLUETOOTH device.
Getting Started 1
Controls
NOTE: These stereo controls are available when you use a connected remote control, such as a Fusion®
ERX400. If you control the stereo using a chartplotter, an NRX remote control, or another stereo on the
network, you should see the owner's manual for that device for more information.
Dial
• Turn to adjust the volume.
• When adjusting the volume, press to switch between zones.
• Turn to move through the menus or adjust a setting.
• When in a menu, press to select the highlighted option.
• Press and hold to activate certain functions such as opening the radio presets or muting all connected
stereos from the mute screen (Muting all Connected Stereos, page 5).
• Press to turn on the remote control.
• Press to mute and un-mute the audio.
• Press and hold to turn off the stereo or all stereos on the network.
• Press and hold for longer than 10 seconds to reset the remote control.
NOTE: The stereo turns on and off when you turn the connected remote control on or off.
• Press to open the menu.
• Press to return to the previous screen from the menu.
• Press and hold to exit the menu.
Press to select a source.
TIP: You can turn the dial to browse, and press the dial to select the source.
Press and hold to open the GROUPS menu when connected to a Fusion PartyBus™ network (Fusion
PartyBus Networking, page 21).
• Press to skip to the previous track, when using an applicable source.
• Press and hold to rewind the track when using an applicable source.
• AM/FM:
◦ Press to tune to the previous station or preset.
◦ Press and hold for faster tuning (manual mode only).
• AUX: Press to decrease the gain.
• SiriusXM source:
◦ In Live Mode, press to tune to the previous station or preset.
◦ In Live Mode, press and hold for faster tuning, in Manual mode only.
◦ In Replay Mode, press to skip to the previous track.
◦ In Replay Mode, press and hold to rewind the current track.
• DAB source:
2 Getting Started
◦ Press to return to the previous DAB station in the ensemble. When you reach the beginning of the
current ensemble, the stereo automatically changes to the last available station in the previous
ensemble.
◦ Press and hold to return to the previous DAB ensemble.
• BT or USB: Press to pause or resume the current track.
• AM/FM:
◦ Press to cycle through the tuning modes (auto, manual, and presets).
◦ Press and hold to save the current station as a preset.
• SiriusXM source:
◦ Press and hold to switch between Replay Mode and Live Mode.
◦ In Live Mode, press to cycle through the tuning modes (Manual, Category, and Preset).
◦ In Replay Mode, press to pause and play.
• DAB:
◦ Press to scan for DAB stations.
◦ Press and hold to save the current station as a preset.
• Press to skip to the next track, when using an applicable source.
• Press and hold to fast-forward the track when using an applicable source.
• AM/FM:
◦ Press to tune to the next station or preset.
◦ Press and hold for faster tuning (manual mode only).
• AUX: Press to increase the gain.
• SiriusXM source:
◦ In Live Mode, press to tune to the next station or preset.
◦ In Live Mode, press and hold for faster tuning, in Manual mode only.
◦ In Replay Mode, press to skip to the next track, if applicable.
◦ In Replay Mode, press and hold to fast-forward the current track, if applicable.
• DAB source:
◦ Press to advance to the next DAB station in the ensemble. When you reach the end of the current
ensemble, the stereo automatically changes to the first available station in the next ensemble.
◦ Press and hold to advance to the next DAB ensemble.
Entering Text
1In a field that allows you to enter text, select to erase the existing characters.
2If necessary, select or to use numerals, symbols, or lower-case letters when available.
3Turn the dial to choose a character, and press the dial to select it.
4Select to save the new text.
Using the Dial to Select Items
You can use the dial to highlight and select items on the screen.
• Turn the dial to highlight an item on the screen.
• Press the dial to select the highlighted option.
Getting Started 3
Stereo Screen
The information displayed on the screen varies depending on the source selected. This example shows a track
playing on a device connected using Bluetooth® wireless technology.
NOTE: The screen shown is from a connected remote control, such as an Apollo ERX400. If you are using your
chartplotter to control the stereo, see your chartplotter's owner's manual for more information.
Source name
Active zone and status icons (Network Status Icons, page 34)
Track details (if available)
Album art (if available from a compatible source)
Elapsed time, track duration, and the current track number out of the total number of tracks in the playlist
(if available)
Naming the Device
You should enter a unique name for this device so you can easily identify it when viewing devices on the
Fusion PartyBus network.
NOTE: You should provide unique names to all of the devices and zones on the network to avoid confusion
when grouping, controlling, and setting up stereos and zones. You should also turn off zones that are not in use
(Speaker Zone Settings, page 24).
For further customization, you can provide unique names for the sources on each stereo and turn off unused
sources (General Settings, page 23).
1Select > SETTINGS.
2Select the device to rename.
3Select DEVICE NAME, and enter a unique name for the device.
Setting the Home Zone
The home zone is the speaker zone that you adjust by default when you turn the dial on the remote control.
1Select > SETTINGS.
2Select the name of the remote control you plan to use with this stereo.
3Select ASSIGN HOME ZONE.
4Select a zone.
4 Getting Started
Otros manuales para FUSION Apollo MS-WB670
1
Tabla de contenidos
Otros manuales de Sistema estéreo de Garmin
Garmin
Garmin Fusion Apollo MS-RA770 Manual de usuario
Garmin
Garmin FUSION Manual de usuario
Garmin
Garmin Fusion MS-BB100 Manual de usuario
Garmin
Garmin Fusion Apollo RA770 Manual de usuario
Garmin
Garmin GMA 342 Manual de usuario
Garmin
Garmin GMA 340 Manual de usuario
Garmin
Garmin GMA 340 Manual del propietario
Garmin
Garmin Fusion Apollo SRX400 Manual de usuario
Garmin
Garmin Fusion APOLLO RV-RA770 Manual de usuario
Garmin
Garmin Meteor 300 Manual de usuario
