Garmin GTN Xi Series Manual de usuario

 

 



 

 



 

  

 

 

  

 



  







the bezel key backlight momentarily illuminates. System failure annunciations

typically disappear within the first 30 seconds after power-up.



The start-up screen presents

the unit software versions, the

name and status of all installed

databases, and the Database

Updates page access key.

Tapping Continue advances to

the Instrument Test page.

If a Flight Stream 510 wireless datacard is present, the

WiFi Info key appears in the controls bar. Tapping this key

opens a setup page. Refer to Wi-Fi Setup for instructions.



  





processor, memory, external inputs, and outputs. The Instrument Panel Self-Test page

displays the results of all external equipment checks performed by the unit.





Ensure that estimated fuel quantity values are accurate before flight.



For the operating limitations of a specific aircraft, consult the POH.

GTN Xi stores preset fuel amounts for estimated full and tab amounts. These settings

may not be editable if the unit is interfaced with a digital fuel computer.

If an instrument remains flagged after one minute, check the status of the

associated LRU, then contact a Garmin dealer for support.

Review this list to ensure that

all CDI/HSI outputs and other

displayed data are correct for

the connected equipment.

Tapping Continue advances to

the Home page.

Fuel on Board

Specify the current fuel quantity.

Tapping this key opens a keypad.



aid in fuel data entry.

Initial value automatically reduces

based on current fuel flow.

Fuel Flow

Set fuel flow amount.

Tapping this key opens a keypad.

  







Tap System > Units > Fuel, and select the preferred units.



Set Full/Tabs

Opens the Fuel Capacity Setup menu.

Select the appropriate data entry key and enter the

estimated fuel amounts.

Fuel Full Capacity: Specify the tank full amount.

Fuel Tab Capacity: Specify the tank tab amount.

These values vary according to aircraft type.

Full

Sets the fuel remaining value to the specified full amount.

Tabs

Sets the fuel remaining value to the specified tab amount.

Fuel capacity units are set in the

System Units app.



  





The navigator supports SD cards in the FAT32 format only, with capacities ranging

between 8 GB and 32 GB.



purchase individual databases or database packages, go to flyGarmin.com.

There are two methods for loading and updating databases. Do not attempt either

of these while in flight (on ground only).

Load databases via SD card. Once loading completes, you may power off

the unit and remove the card.

Transfer databases from a Flight Stream 510 wireless datacard. This

method requires the Garmin Pilot app on a portable electronic device.

1Optional third-party database.



 Bodies of water, geopolitical boundary, and road

information

1Jeppesen terminal procedures

 AeroNav terminal procedures

 Airport, NAVAID, waypoint, and airspace information

(Garmin or Jeppesen)

 Obstacle and wire data

 Airport surface diagrams

 Terrain elevation data



Visit flyGarmin.com to report any

discrepancies in database

information. These may include

incorrect procedures, inaccurate

depictions of terrain, obstacles

and fixes, or errors with any

other screen element used for

navigation or communication

purposes.

For information regarding third-party

navigation databases, go to

jeppesen.com.

  





Most databases expire at regular intervals. Exceptions include Basemap and Terrain,

which neither expire nor update on a regular schedule.









Effective upon release

Includes Basemap and Terrain







Effective during a specific period

Unit determines database status using the current date

and time from GPS

Automatic activation occurs on the effective date

The start-up page lists all currently

installed databases. Review this list for

current database types, cycle numbers,

and expiration dates.

Yellow text denotes when a database is:

Not available

Installed before its effective date

Missing date information

Past its expiration date





When database files are loaded

to the SD card, any previously

loaded database files of the

same type residing on the card

are overwritten. This includes

loading a database of a different

coverage area or data cycle than

that currently residing on the

SD card.



  



The navigator uses two types of databases:





Active Databases Standby Databases

The databases in use by the system. Databases that have not reached the

effective date. These remain on the

SD card until they become effective.







During normal operation, you can view

information about all active and standby

databases from the System Status page.



Selecting Active displays

information about the

databases currently in use.

You can also access copyright

information from here.

Tapping View Copyrights

displays copyright information

for all installed databases.

  







Selecting Standby displays

information about databases

that are not yet effective.

GTN Xi notifies when no

standby databases are

available.

Notifications for databases not

present or available also display

in the form of system messages.

Review the Active Database Info

list to determine the status of

the indicated database.

Database

Not Present



  





The Database Updates page is available only when:

The aircraft is on ground

The start-up page is active (i.e., during power up)





A Connext icon indicates when a database is from Garmin Pilot via wireless transfer.



standby queue.

This page presents a list of all

available databases.

To open, tap the Databases

key on the start-up page.

Connext Icon

  





Select individual databases for transfer, or choose Select All

if all listed databases require updating.

By default, this page displays

only the databases

recommended for update.

A message notifies when no

such databases are available.

After all selections are made, initiate the update process by

tapping Start.

The unit automatically restarts

once all updates are complete.

Otros manuales para GTN Xi Series

Tabla de contenidos

Otros manuales de GPS de Garmin

Garmin

Garmin StreetPilot III Manual de usuario

Garmin

Garmin Group Ride Manual de usuario

Garmin

Garmin aera 1900111700 Manual de usuario

Garmin

Garmin iQUE M5 Manual de usuario

Garmin

Garmin GPSMAP 192C Manual del propietario

Garmin

Garmin GPSMAP 12X3 Manual de usuario

Garmin

Garmin dezl 570 Series Manual de usuario

Garmin

Garmin eTrex 30x Manual de instrucciones

Garmin

Garmin GPSMAP 64s Manual de usuario

Garmin

Garmin ZUMO 340 Manual de usuario

Garmin

Garmin Rino 120 Manual de usuario

Garmin

Garmin VIB 10 - GPS Receiver Guía de referencia

Garmin

Garmin GPS 95AVD Manual de usuario

Garmin

Garmin Zumo XT Manual de usuario

Garmin

Garmin GPSMAP 496 Manual de usuario

Garmin

Garmin GPSMAP 5000 Series Manual de usuario

Garmin

Garmin nuvi 2455LT Manual de instrucciones

Garmin

Garmin GTN 625 Especificaciones técnicas

Garmin

Garmin GPS 17x Guía de referencia

Garmin

Garmin iQue 3600a Manual de usuario

Garmin

Garmin GPSMAP 76 series Manual de usuario

Garmin

Garmin GPSMAP 4010 Manual de usuario

Garmin

Garmin 2200 Manual de usuario

Garmin

Garmin iQUE 3600 Guía de referencia

Manuales populares de GPS de otras marcas

Raven

Raven Cruizer II Manual

Hama

Hama 53118 Manual de usuario

Jigabot

Jigabot EX Manual de usuario

Pointer

Pointer Cellocator CelloTrack XT LTE Guía de instalación

Queclink

Queclink GV55LITE Manual de usuario

Voxson

Voxson Voxtrack GPS500 Manual de instrucciones

Starcom Systems

Starcom Systems Kylos Compact Manual de usuario

Cobra

Cobra Marine MC 600Ci Manual de usuario

Cellocator

Cellocator CelloTrack T Manual de usuario

Enfora

Enfora Mini-MT GSM2228UG001 Manual de usuario

Magellan

Magellan eXplorist 100 Manual de usuario

LTE

LTE G50B Manual de usuario

SkyGolf

SkyGolf SkyCaddie SG1 Manual de usuario

Kenwood

Kenwood DNN9330BT Manual de usuario

Safelet

Safelet Indra Manual de usuario

Bushnell

Bushnell 360100 Manual de usuario

Geneq

Geneq SXBlue Manual de usuario

ORIGO

ORIGO ED308 Manual de usuario