Gardenline GLGT400 Manual de usuario

400W Grass Trimmer

User Guide

Please read this manual

thoroughly before use and

retain for future reference.

After Sales Support

Now you have purchased an Gardenline

product you can rest assured in the

knowledge that, as well as your

3 year parts and labour guarantee,

you have the added peace of

mind of dedicated helplines

and web support.

MODEL: GLGT400, 04/15, 64887

AFTER SALES SUPPORT-7 DAYS A WEEK

www.coreservice.co.uk

01904 727501

GB IRE 019022605

(Charged at local rates)

Contents

Page

Welcome

General Information

Safety Instructions

Assembly & Parts List

Getting Started

Features

Operating Instructions

Maintenance

Frequently Asked Questions

Useful Information

www.coreservice.co.uk

AFTER SALES SUPPORT

IRE

GB 01904 727501 019022605 MODEL: GLGT400, 04/15, 64887

Welcome 1

You have made an excellent choice with the purchase of this

quality Gardenline product.

By doing so you now have the assurance and peace of mind which

comes from purchasing a product that has been manufactured to

the highest standards of performance and safety, supported by

the high quality standards of Aldi.

We want you to be completely satisﬁed with your purchase so this

Gardenline product is backed by a comprehensive manufacturer’s

3 year warranty and an outstanding after sales service through

our dedicated Helpline.

We hope you will enjoy using your purchase for many years to

come. If you require technical support or in the unlikely event

that your purchase is faulty please telephone our helpline for

immediate assistance. Please contact the technical helpline before

returning your product to store. Faulty product claims made

within the 3 year warranty period will be repaired or replaced

free of charge provided that you have satisfactory proof of

purchase (keep your till receipt safe!).

This does not affect your statutory rights. However, be aware that

the warranty will become null and void if the product is found to

have been deliberately damaged, misused or disassembled.

www.coreservice.co.uk

AFTER SALES SUPPORT

IRE

GB 01904 727501 019022605 MODEL: GLGT400, 04/15, 64887

General Information 2

IMPORTANT

READ CAREFULLY BEFORE USE

KEEP FOR YOUR REFERENCE

WARNING! Read all safety regulations and instructions

before ﬁrst use.

When using equipment, a few safety precautions must be

observed to avoid injuries and damage. Please read the

complete operating manual with due care.

Keep this manual in a safe place, so that the information

is available at all times. If you give the equipment to any

other person, give them these operating instructions as

well.

WARNING! This product is not intended for use by persons

with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the

product by a person responsible for their safety.

Children should be supervised to ensure that they do not

play with the product.

Items supplied

Open the packaging and take out the equipment with

care.

Remove the packaging material and any packaging and/or

transportation braces (if applicable).

Check to see that all items are included.

Inspect the equipment and accessories for transport

damage.

Keep the packaging until the end of the warranty period.

Parts list please see page 12.

www.coreservice.co.uk

AFTER SALES SUPPORT

IRE

GB 01904 727501 019022605 MODEL: GLGT400, 04/15, 64887

Explanation of the symbols and warning signs on

the machine

1. This symbol indicates there is a danger of serious personal

injury or death if you do not observe the warning.

2. Read the instruction manual.

3. Objects thrown by the product could hit the user or other

bystanders. Always ensure that other people and pets remain at

a safe distance from the product when it is in operation.

In general, children must not come near the area where the

product is.

4. Appropriate ear, and eye protection must be worn.

5. Do not expose the product to rain or wet conditions (moisture).

6. Warning! Keep other people out of working area during operation.

A distance of at least 15 m must be observed.

7. Warning! Cutting device continues to rotate after the motor

is switched off.

8. Warning! Disconnect from the mains plug if the cord is damaged

or entangled. DO NOT TOUCH THE CORD BEFORE DISCONNECTING

THE SUPPLY.

9. Guaranteed sound power level.

10. WEEE symbol. Waste electrical products should not be disposed of

with household waste. Please recycle where facilities exist. Check

with your Local Authority or local store for recycling advice.

11. This product is of protection class II. That means it is equipped with

enhanced or double insulation.

1 2 3 4 5

6 7 8 9 10 11

www.coreservice.co.uk

AFTER SALES SUPPORT

IRE

GB 01904 727501 019022605 MODEL: GLGT400, 04/15, 64887

Safety Instructions 3

SAFETY WARNINGS

Work area safety

1. Keep work area clean and well lit. Cluttered or dark areas

invite accidents.

2. Do not operate power tools in explosive atmospheres, such as

in the presence of ﬂammable liquids, gases or dust. Power

tools create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while operating a power

tool. Distractions can cause you to lose control.

Electrical safety

1. Power tool plugs must match the outlet. Never modify the plug

in any way. Do not use any adapter plugs with earthed

(grounded) power tools. Unmodiﬁed plugs and matching

outlets will reduce risk of electric shock.

2. Avoid body contact with earthed or grounded surfaces, such as

pipes, radiators, ranges and refrigerators. There is an increased

risk of electric shock if your body is earthed or grounded.

3. Do not expose power tools to rain or wet conditions. Water

entering a power tool will increase the risk of electric shock.

4. Do not abuse the cord. Never use the cord for carrying, pulling

or unplugging the power tool. Keep cord away from heat, oil,

sharp edges or moving parts. Damaged or entangled cords

increase the risk of electric shock.

5. When operating a power tool outdoors, use an extension cord

suitable for outdoor use. Use of a cord suitable for outdoor use

reduces the risk of electric shock.

6. If operating a power tool in a damp location is unavoidable,

use a residual current device (RCD) protected supply. Use of an

RCD reduces the risk of electric shock.

www.coreservice.co.uk

AFTER SALES SUPPORT

IRE

GB 01904 727501 019022605 MODEL: GLGT400, 04/15, 64887

Personal safety

1. Stay alert, watch what you are doing and use common sense

when operating a power tool. Do not use a power tool while

you are tired or under the inﬂuence of drugs, alcohol or

medication. A moment of inattention while operating power

tools may result in serious personal injury.

2. Use personal protective equipment. Always wear eye

protection. Protective equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

3. Prevent unintentional starting. Ensure the switch is in the

off-position before connecting to power source and/or battery

pack, picking up or carrying the tool. Carrying power tools

with your ﬁnger on the switch or energising power tools that

have the switch on invites accidents.

4. Remove any adjusting key or wrench before turning the power

tool on. A wrench or a key left attached to a rotating part of

the power tool may result in personal injury.

5. Do not overreach. Keep proper footing and balance at all

times. This enables better control of the power tool in

unexpected situations.

6. Dress properly. Do not wear loose clothing or jewellery. Keep

your hair, clothing and gloves away from moving parts. Loose

clothes, jewellery or long hair can be caught in moving parts.

7. If devices are provided for the connection of dust extraction

and collection facilities, ensure these are connected and

properly used. Use of dust collection can reduce dust-related

hazards.

Power tool use and care

1. Do not force the power tool. Use the correct power tool for

your application. The correct power tool will do the job better

and safer at the rate for which it was designed.

2. Do not use the power tool if the switch does not turn it on and

off. Any power tool that cannot be controlled with the switch

is dangerous and must be repaired.

3. Disconnect the plug from the power source and/or the battery

pack from the power tool before making any adjustments,

changing accessories, or storing power tools. Such preventive

safety measures reduce the risk of starting the power tool

accidentally.

www.coreservice.co.uk

AFTER SALES SUPPORT

IRE

GB 01904 727501 019022605 MODEL: GLGT400, 04/15, 64887

4. Store idle power tools out of the reach of children and do not

allow persons unfamiliar with the power tool or these

instructions to operate the power tool. Power tools are

dangerous in the hands of untrained users.

5. Maintain power tools. Check for misalignment or binding of

moving parts, breakage of parts and any other condition that

may affect the power tool’s operation. If damaged, have the

power tool repaired before use. Many accidents are caused by

poorly maintained power tools.

6. Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to bind

and are easier to control.

7. Use the power tool, accessories and tool bits etc. in accordance

with these instructions, taking into account the working

conditions and the work to be performed. Use of the power

tool for operations different from those intended could result

in a hazardous situation.

Service

1. Have your power tools serviced by a qualiﬁed repair person

using only identical replacement parts. This will ensure that

safety of the power tool is maintained.

WARNING! When using the product the safety rules must

be followed. For your own safety and that of bystanders

please read these instructions before operating the

product. Please keep the instructions safe for later use.

ELECTRICALLY POWERED GRASS TRIMMER SAFETY WARNINGS

IMPORTANT

READ CAREFULLY BEFORE USE

KEEP FOR YOUR REFERENCE

www.coreservice.co.uk

AFTER SALES SUPPORT

IRE

GB 01904 727501 019022605 MODEL: GLGT400, 04/15, 64887

Training

1. Read the instructions carefully. Be familiar with the controls

and the proper use of the product.

2. Never allow people unfamiliar with these instructions or

children to use the product. Local regulations can restrict the

age of the operator.

3. Keep in mind that the operator or user is responsible for

accidents or hazards occurring to other people or their

property.

Preparation

1. Never operate the product while people, especially children, or

pets are nearby.

2. Wear eye & ear protection and stout shoes at all times while

operating the product

Operation

1. Use the product only in daylight or good artiﬁcial light.

2. Never operate the product with damaged guards or shields or

without guards or shields in place.

3. Keep hands and feet away from the cutting attachment at all

times and especially when switching on the motor.

4. Before use check the controls and proper use of the product.

5. Before using the product and after any impact, check for signs

of wear or damage and repair as necessary.

6. Always disconnect the product from the power supply (i.e.

remove the plug from the power supply or the battery pack)

– whenever leaving the product unattended;

– efore clearing a blockage;

– before checking, cleaning or working on the product

– after striking a foreign object;

– whenever the product starts vibrating abnormally.

7. Take care against injury to feet and hands from the cutting

attachment.

8. Always ensure that the air vents are kept clear of debris.

9. care against injury from any device ﬁtted for trimming the

ﬁlament line length, if applicable. After extending new cutter

line always return the product to its normal operating position

before switching on.

10. Never ﬁt metal cutting elements.

www.coreservice.co.uk

AFTER SALES SUPPORT

IRE

GB 01904 727501 019022605 MODEL: GLGT400, 04/15, 64887

11. Never replace non-metallic cutting means with metallic cutting

means.

12. Never use replacement parts or accessories not provided or

recommended by the manufacturer.

13. The product should be supplied via a residual current device

(RCD) with a tripping current of not more than 30 mA.

14. Avoid using the product in bad weather conditions especially

when there is a risk of lightning.

15. Position the cord so that it will not be caught by the cutting

attachment during operation.

16. Disconnect from the power supply when the cord becomes

damaged or tangled.

17. If the cord becomes damaged during use, disconnect the cord

from the supply immediately. DO NOT TOUCH THE CORD

BEFORE DISCONNECTING THE SUPPLY.

18. Do not use the product if the cord is damaged or worn.

19. Warning! The cutting elements continue to rotate after the

product is switched off.

20. Keep the extension cord away from cutting elements.

21. Only use an extension cord not lighter than:

– if rubber insulated, ordinary tough rubber sheathed ﬂexible

cord (code designation 60245 IEC 53);

– if polyvinyl chloride insulated, ordinary polyvinyl chloride

sheathed ﬂexible cord (code designation 60227 IEC 53).

22. Do not expose the product to rain.

Maintenance and storage

1. Disconnect the product from the power supply (i.e. remove the

plug from the power supply or the battery pack) and check for

damage after use.

2. Disconnect the product from the power supply (i.e. remove the

plug from the power supply or the battery pack) before

carrying out maintenance or cleaning work.

3. Use only the manufacturer’s recommended replacement parts

and accessories.

4. Inspect and maintain the product regularly. Have the product

repaired only by an authorised service centre or similar

qualiﬁed specialist.

5. When not in use, store the product out of the reach of children.

www.coreservice.co.uk

AFTER SALES SUPPORT

IRE

GB 01904 727501 019022605 MODEL: GLGT400, 04/15, 64887

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Recortadora de Gardenline

Gardenline

Gardenline SPS01-26TRB2 Guía del usuario

Gardenline

Gardenline ALDI HTH250 Manual de usuario

Gardenline

Gardenline GLHT551 Manual de instrucciones

Gardenline

Gardenline 31CC 4 STROKE Manual de usuario

Gardenline

Gardenline 52742 Manual de usuario

Gardenline

Gardenline M0E-17ET-510 Manual de usuario

Gardenline

Gardenline GCGS 18-S Manual de usuario

Gardenline

Gardenline GLHT680 Manual de instrucciones

Gardenline

Gardenline 43671/HTKS26 Manual de usuario

Gardenline

Gardenline GLHT600 Manual de usuario

Gardenline

Gardenline GLT 453 Manual de usuario

Gardenline

Gardenline LT26 Manual de usuario

Gardenline

Gardenline YGL N.G.1250-1 Manual de usuario

Gardenline

Gardenline CBC36A Manual de usuario

Gardenline

Gardenline GL-CH 36 Li Manual de usuario

Gardenline

Gardenline BG-PH2250 Manual de usuario

Gardenline

Gardenline GLHT 6051 Manual de instrucciones

Gardenline

Gardenline GPLT-26CC Manual de usuario

Gardenline

Gardenline GLGS-250 Manual de instrucciones

Gardenline

Gardenline GLPHT26 Manual de usuario

Gardenline

Gardenline GL3.6GS Manual de usuario

Gardenline

Gardenline GPHS-26cc Manual de usuario

Gardenline

Gardenline GLT455 Manual de instrucciones

Gardenline

Gardenline Hedge Trimmer Manual de usuario

Manuales populares de Recortadora de otras marcas

MTD

MTD HT 51 E Manual de usuario

McCulloch

McCulloch T22 LS Manual de usuario

COCKRAFT

COCKRAFT PRO HL36-S Manual de usuario

Grizzly

Grizzly CT 1800 Li Manual de usuario

Peco

Peco Z Trimmer ZT-3000 Manual de usuario

Solo

Solo 116 Manual de usuario

Stiga

Stiga ST 1200 Manual de usuario

Echo

Echo GT-225 - 10-09 Manual de usuario

RedMax

RedMax BT17 Manual de usuario

GreenWorks

GreenWorks STA806 Manual de usuario

Parkside

Parkside PHSL 900 A3 Manual de usuario

Gardeo

Gardeo PRO GPTHT2560 Manual de usuario

Park

Park DT-810870 Manual de usuario

Worx

Worx WG209 Manual de usuario

Makita

Makita 3710 Manual de usuario

Champion

Champion 100683 Manual de usuario

Stihl

Stihl FS 311 Manual de usuario

Efco

Efco STARK 38 Manual