Gardenline 36357 Manual de usuario
Black
Cyan
Magenta
Yellow
Code: 36357
Date: 110614 Edition: 09 Op: DCR
PMS3425C
Upright Blower/Vacuum
User Guide
PMS877C
After Sales Support
Now you have purchased a Gardenline®
product you can rest assured in the
knowledge that as well as your
1 year parts and labour guarantee
you have the added peace of
mind of dedicated helplines
and web support
2
Contents
03 Introduction
03 Environmental protection
04 Description of symbols
04 Specifications
05 General safety rules
07 Additional safety rules for blower vacs
10 Parts list
11 Unpacking
11 Adjusting the handle
11 Attaching the collecting bag
11 Before starting
12 Working in vacuum mode
12 Working in blower mode
12 Remove obstructions from the vacuum opening
13 Emptying the bag
13 Important notes with the collection bag
14 Maintenance and storage
14 Power cord maintenance
3
Introduction
Your new Gardenline® power tool will more than satisfy
your expectations. It has been manufactured under stringent
Gardenline® Quality Standards to meet superior performance
criteria.
You will find your new tool easy and safe to operate, and, with proper care,
it will give you many years of dependable service.
CAUTION. Carefully read through this entire Instruction Manual before using
your new Gardenline® Power Tool. Take special care to heed the Cautions and
Warnings.
Your Gardenline® power tool has many features that will make your job faster and
easier. Safety, performance, and dependability have been given top priority in the
development of this tool, making it easy to maintain and operate.
Environmental protection
Recycle unwanted materials instead of disposing of them as waste.
All tools, hoses and packaging should be sorted, taken to the local
recycling centre and disposed of in an environmentally safe way.
1
4
Description of symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Wear hearing protection. Wear eye protection. Wear breathing protection.
Double insulated for additional protection.
Conforms to relevant standards for electromagnetic compatibility.
Warning.
Read the instruction manual carefully.
Do not use in the rain, or leave outside while it is raining.
WARNING. Keep spectators away. Beware of objects being flung out.
WARNING. Remove the plug from the wall socket before carrying
out any kind of maintenance.
Specifications
Voltage: 230 – 240V~50Hz
Rated power: 2400W
No Load Speed: 15,000 min-1
Vacuum head width: 475mm
Max blower air output: 52 – 64 m3/min
Max. suction capacity: 20m3/min
Bag volume: 35L
Weight: 9.5Kg
Noise rating: 85 dBa (taken at 7.5M).
General Information & Safety Instructions
2
5
General safety rules
WARNING Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b. Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the
dust or fumes.
c. Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e. When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
f. To reduce the risk of electric shock, the manufacturer recommends the use of a
residual current device with a rated residual current of 30mA or less at all times.
General Information & Safety Instructions
2
6
3. Personal safety
a. Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention while operating power
tools may result in serious personal injury.
b. Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
c. Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energising power tools
that have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may
result in personal injury.
e. Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
g. If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collection
can reduce dust-related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of starting the
power tool accidentally.
General Information & Safety Instructions
2
7
d. Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f . Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
h. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
i. Children should be supervised to ensure that they do not play with the appliance.
5. Service
a. Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is
maintained.
Additional safety rules for blower vacs
• Always wear adequate protective clothing when operating the tool to avoid
injuries to face, eyes, hands, feet, head or hearing. Use safety glasses or a face
shield, high boots or sturdy shoes, long trousers, work gloves, a hard hat and ear
defenders.
• Do not start the tool when it is upside down or when it is not in the operating
position.
• Switch the motor off and remove the plug when the tool is not being used, left
unattended, being cleaned, being moved from one place to another or when the
extension cord is entangled or damaged.
General Information & Safety Instructions
2
8
• Do not operate the tool near people, especially children or pets. Turn it off if they
get too close. Maintain a safe distance of at least 5m from other people when
using the tool.
• Never direct the blower tube or blow debris towards bystanders or pets.
• The operator is responsible for accidents or hazards occurring to other people or
their property.
• Do not handle the plug or the tool with wet hands and do not use
the tool in the rain.
• Use only outdoor rated extension leads that are so marked. Keep the extension
cord away from heat, oil and sharp edges.
• Ensure that the extension lead is secured in a manner that prevents it form
disconnecting from the plug whilst in use.
• Keep all the air intakes and the blower tube free of dust, lint, hair and other
material that may cause a reduction in air flow.
• Keep a balanced and stable stance while using the tool.
• Do not switch on the tool in enclosed or poorly ventilated spaces or in the
presence of inflammable and/or explosive substances such as liquids, gasses and
powders.
• Make sure you have a safe hand when you are working on inclines.
• Move forward by walking, do not run.
• Do not get distracted and always concentrate on what you are doing. Use
common sense. Never operate the tool when you are tired, sick or under the
influence of alcohol or other drugs.
• Do not operate this appliance with long loose hair or loose fitting jewellery. Tie
long loose hair back and remove loose fitting jewellery.
• Do not allow the blower vac to pick up any burning or smouldering materials like
ashes, cigarette butts etc.
• Do not attempt to pick up breakable objects like glass, plastics, china etc.
• Do not use in vacuum operation without the collection bag fitted.
• Do not use the blower vac in either the vacuum or the blow position on gravel
surfaces.
General Information & Safety Instructions
2
9
• Only operate the tool during broad daylight or with adequate artificial light.
• When the tool is not in use, store it in a dry place and out of reach of children.
• After use, disconnect the tool from the power supply and check for damage. If
you have the slightest doubts, contact an authorised service centre.
• Only use the tool according to the instructions given in this manual.
• Check regularly that the screws are tight.
• Use only spare parts and accessories recommended by the manufacturer.
• Do not try to repair the tool or access internal parts. Contact authorised service
centres only.
• This wheeled vacuum/blower device mainly serves to clean hard surfaces as paved
paths courtyards and terraces. It is only suitable for vacuuming or blowing dry,
light material as grass, leaves, small twigs and pieces of paper. The vacuuming
of heavy materials as metal, stones, branches, broken glass and wet leaves is
expressly excluded.
• If operating a power tool in a damp location is unavoidable, use a residual current
device (RCD) protected supply with a residual tripping current of 30mA or less.
Use of an RCD reduces the risk of electric shock.
• Always use weatherproof extension cable with high performance insulation
approved for outdoor use.
• This wheeled vacuum/blower is designed to operate on smooth hard surfaces
such as paved and concrete area’s, it can also be used on short kept lawns. It is
only suitable for vacuuming or blowing dry, light material as grass, leaves, small
twigs and pieces of paper. The vacuuming of heavy and solid materials such as
metal, stones, branches, broken glass and wet leaves will damage the internal
mechanism and void warranty.
WARNING. We recommend the use of a residual current device with a residual
current rating of 30mA or less.
General Information & Safety Instructions
2
10
1. Trigger handle
2. Trigger switch
3. Collecting bag
4. Blower or Vacuum mode selection switch
5. Wheel
6. Brush
7. Blower outlet
8. Vacuum inlet
9. Handle tilt release button
10. Collection bag release button
11. Collection bag handle
12. Strain relief
Parts List
4
3
1
5
6
7
8
2
10
11
9
12
3
Tabla de contenidos
Otros manuales de Soplador de Gardenline
Gardenline
Gardenline GLBV-2500 Manual de usuario
Gardenline
Gardenline GLBV 2501 Manual de usuario
Gardenline
Gardenline GLLS 3000/3 Manual de usuario
Gardenline
Gardenline 60099 Manual de usuario
Gardenline
Gardenline GLLS 3002 UK Manual de usuario
Gardenline
Gardenline 52754 Manual de usuario
Gardenline
Gardenline 52754 Manual de usuario
Gardenline
Gardenline PBV26CC Manual de usuario
