Ganz ZN-MD2xx Series Manual de instrucciones

Quick User Guide ZN-MD2xx Series Network Camera

Ver1.00 EN

Warning before installation

-Power off the Network camera if it is found to be smoking or smells unusual.

-Keep the Network camera away from water. If the Network camera gets wet, power

off immediately.

-Do not place the Network camera near heat sources, such as a television or oven.

-Refer to your instruction manual for the operating temperature.

-Keep the Network camera away from direct sunlight.

-Do not place the Network camera in high humidity environments.

-Do not place the Network camera on unsteady surfaces.

-Do not touch the Network camera when there is lightning present.

-Do not disassemble the Network camera.

-Do not drop the Network camera.

-Do not insert any object into the Network camera, such as a screwdriver.

For other safety and regulation information, please refer to “User’s manual”.

1. Check Contents

No. Item Description

1 Network Camera ZN-MD2xx Series

2 Software CD User’s Manual, Utility software

3 Quick User Guide This document

4 Accessories Silica-gel

Templates for installation

Video monitor cable

Focus adjust ring

Anti reflect rubber

Tapping Screw M4x30 : 3pcs

Anchor : 3pcs

Screw M4x8 : 4pcs

Surface Mount Bracket

L-Wrench (T20)

2. Physical Description

Quick User Guide ZN-MD2xx Series Network Camera

Ver1.00 EN

1. Control Button

-Change Video output format NTSC/PAL. (toggle)

-Factory Default (Keep hold more than 10 seconds)

2. Network LED

3. Status LED

4. Reset Button

5. Video output for service monitor

6. Lock nut

7. Focus adjustment

8. Network (RJ-45 PoE required)

3. Making Connection

Connect Ethernet cable to make a connection to the POE HUB.

The camera support POE only.

4. Assign IP address

The default setting of the camera is set to “DHCP” and “UPnP” function is

set to ON. If you have a DHCP server on your network and UPnP function is

enabled on your PC you can find the network camera in “My network”.

If a DHCP server is not available on your network, please assign IP address

by the following process.

Execute PixelPro_Discovery_Tool.exe. It will search cameras on the network

automatically.

1) After the camera is listed in camera list, select the camera.

2) Type in the all network information.

3) Click “Apply” button

Then double click the camera in the list, Internet explorer will open

automatically.

3. Connect power cable to the camera.

When you use PoE function, you don’t

need to connect power.

Quick User Guide ZN-MD2xx Series Network Camera

Ver1.00 EN

5. Web browser connection

Note : The Network camera supports Internet Explorer 7 or above.

Please check version of your browser and update it if necessary.

When you first access the camera you need to download and install an

Active X control from the camera to display a Live View image.

Default User and Password are set to “ADMIN” and “1234”. Please type in

the user ID and password to connect the network camera.

Note: By Default the cameras come with “Installation Mode” set to “ON” to

enable Analog output. You must turn installation mode off to use 720p

or 1080p streaming.

For further information for setup, please refer to User’s manual

in software CD.

Tabla de contenidos

Otros manuales de Cámara de seguridad de Ganz

Ganz

Ganz PixIPro ZN-MDI243M-IR Manual de usuario

Ganz

Ganz ZC-DT8312NHA-IR Manual de usuario

Ganz

Ganz ZC-D8000 SERIES Manual de usuario

Ganz

Ganz PIXELPRO SERIES Manual de usuario

Ganz

Ganz ZN8 Series Manual de usuario

Ganz

Ganz ZC-NH250N Manual de usuario

Ganz

Ganz ZN-D2024 Manual de usuario

Ganz

Ganz ZC-YHW702 Series Manual de usuario

Ganz

Ganz ZN-NH21VE Manual de usuario

Ganz

Ganz PixeIPro Series ZN-C2M Manual de instrucciones

Ganz

Ganz ZN-D100VE Manual de usuario

Ganz

Ganz ZC-D5000 NXA series Manual de usuario

Ganz

Ganz ZN-MB243M Manual de usuario

Ganz

Ganz ZC-DN3048PHA Manual de usuario

Ganz

Ganz ZN-DNT352XE SERIES Manual de usuario

Ganz

Ganz ZN-D212XE Manual de usuario

Ganz

Ganz Lite VRDDN-2812Y60 Manual de usuario

Ganz

Ganz ZC-BT SERIES Manual de usuario

Ganz

Ganz ZC-PT336N-IR Manual de usuario

Ganz

Ganz ZC-BNX4312NHA Manual de usuario

Ganz

Ganz ZC-DWNT8312NBA Manual de usuario

Ganz

Ganz C-AllView Manual de usuario

Ganz

Ganz ZN-PTZ202XE-XT Manual de usuario

Ganz

Ganz PixelPRO ZN-DT2MA Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario