Ganz NR4HL Manual de usuario

᧮

CONTENT

OVERVIEW PLAY

3 Before Installation 62 If you want to play

4 Key Features

6 Front Panel

7 Rear Panel

8 Remote ControlAt a Glance

INSTALLATION ARCHIVING

10 Basic Layout 65 To start the Archive menu

11 Connecting to an external devices

MONITORING WEB VIEWER

18 Start up/Shutdown 68 What is the Web Viewer?

20 Live ScreenAt a Glan 70 Live

74 Search

76 Setup

SYSTEM SETTING MOBILE VIEWER

26 To move to the System Setup menu 88 GanzView

27 Camera Setting

30 Display Setting

33 Audio Setup

34 User Setting

36 Network Setup

39 System Setting

43 Storage

45 Event Setup

RECORD SETTING ARCHIVE VIEWER

52 To start the Record Setup menu 99 Getting started with the Backup Play

52 Record Setup 100 Backup Player At a Glance

SEARCH APPENDIX

58 To move to the Search menu while 103 Specification

in monitoring

58 To move to the Search menu while

in playback mode

59 Search Settings

᧯

OVERVIEW

Before installation

Comply with the following instructions to prevent a fire, explosion, system failure shock. or electric

Remove the power supply module before proceeding.

Check the input voltage (AC100VದAC240V) to the power supply module before connecting it.

Keep the product away from humidity.

Ensure that all devices connected to the product should be properly earth-grounded.

In operation mode

Comply with the following instructions to prevent a fire, explosion, system failure or electric

If you need to open the cover, consult with a service person who could help you do what you

want to do.

Do not connect multiple devices to a single power socket.

Keep the product away from dust or too much combustible substances (ex: propane gas).

Do not touch it with wet hand.

Do not insert a conductor in the vent of the ventilation system.

Do not apply excessive force to unplug the power cord.

Disassembly & Cleaning

When cleaning on the surface, use a dry cloth.

Do not wipe the product using water, paint thinner or organic solvents.

Do never dismantle, repair or modify the product by your own.

During installation

To prevent an accident or physical injury and to operate NVR properly, please comply with the

followings

Secure at least 18 centimeter of distance between cooling fan and wall for a proper ventilation.

Install the product on a flat surface.

Keep it away from direct sunlight or excessive temperature.

While in use

Do not apply force to or shake it while using it.

Do not move, throw away or put excessive force to it.

Using any unrecommended HDD may cause a system failure. Check the compatibility list and

use only compatible HDDs.

{A system failure or data loss caused by an incompatible HDD will void your warranty.}

᧰

OVERVIEW

Key Features

This product allows you to receive audio and video signals from a max of 4/8 CH 1080p H.264

network camera before

saving them to the internal HDD. Besides, you can also transfer them to an external device that can

be monitored on your PC

or mobile phone remotely

Display the video from up to 4/8 CH 1080p network camera in real time (Max 120/240 fps)

Save the video from up to 4/8 CH 1080p network camera in a max of 32/64Mbps (8Mbps

per channel) (Max 120/240fps)

Play up to 4/8 CH 1080p video in real time (Max 120/240 fps)

H.264 BP/MP/HP network camera supported(BP: Baseline profile, MP: Main profile, HP:

High profile)

4/8 built-in port, PoE switching hub (40W/72W)

ಫPlug & Play’ camera connection

Protect the IP camera via secured closed circuit LAN environment

Auto notification with self diagnosis (HDD S.M.A.R.T, temperature, network connection

status,fan error, etc.)

Dual streaming supported for a remote display

Auto resolution & FPS adjustment for a remote service

External eSATAHDD supported – various search methods (time, event, bookmark and

thumbnail)

Mass storage backup via USB port or FTP server

Dedicated smart phone applications that can be used with iPhone and iPad or onAndroid

1080p Full HD GUI

᧱

OVERVIEW

What's included

Mouse  RemoteControlx1 PowerCablex2

&Batteries(AAAx2)

DC 12V Adaptor DC 48V Adaptor Screws

Adapter cable retainer clip x2 User manual CD Quick Guide

᧲

OVERVIEW

Front Panel

Name Description

IR Remote

Control

Receiver

Receive the signal from the remote control

USB Used for connecting USB storage or mouse.

Status LED Show the status of power,recording or network connection

together with the corresponding alarm.

᧳

OVERVIEW

Rear Panel

NO Name Description

1CAM1~CAM8 Ethernet ports used for connecting the network camera video and

power.

2WAN(UPLINK) Network port for connection to the Internet, router or hub

3AUDIO IN Microphone connection port.

4ALARM OUT Alarm output device connection port.

5RS-485 Communications port for connecting peripherals such as system

keyboard.

6Power Switch NVR power switch.Plug the power cord and turn this switch on.

7DC 12V NVR power input port Connect to a 12V adaptor.

8RS-232C Signal connection port for POS and ATM.Scheduled to be

upgraded.

9ALARM IN Alarm input signal port.

10 AUDIO OUT Port for speaker connection.

11 eSATA Connection port for external SATAstorage.

12 HD MONITOR Port for connecting a full HD(1920x1080) supported monitor.

Use the HDMI cable to connect with a 1080p 60Hz monitor.

13 LAN(DOWNLINK) Port for connecting the dedicated network device. (Do not share with

other device.)

14 DC 48V Power input port for the camera (PoE compliant).

Connect to a 48V adaptor.

᧴

OVERVIEW

Remote Control At a Glance

LOGOUT

POWER

Turn on or off the power. PANIC

Start the emergency recording.

Display the search window. ALARM

Show the alarm status with

a popup window.

ARCHIVE

Display the backup window. SETUP

Display the system setup menu.

Channel

Function as channel selection

button in live or playback mode.

Or used for entering the password. ID

Set the remote control ID.

DISPLA

Switch the split mode.

SEQ

Switch to sequence mode.

SNAPSHOT

Turn on or off the power.

Used to change the direction

or adjust the play speed

in playback mode.

EXIT

Exit from the current screen

and return to the previous

screen.

ENTER

Select a menu item or apply

your settings.

LOG

Display the log list.

KEYLOC

Lock any operation on the unit.

AUDIO

Display the audio channel

Selection window.

RESERVE

Turn on or off the power.

Display the tool bar on the live

screen.

Use to move through the menus

PTZ/ZOOM

Enter the PTZ or digital zoom

Mode and control the operation.

᧵

OVERVIEW

Change the remote control ID

The remote control will be active only if the remote control ID matches with that specified on the

NVR.

If multiple NVRs are installed on one place and you have just a single remote control, use the ID

button to set the remote control ID. Only the ID-matching NVR can be controlled.

1. From <SYSTEM> - <CONTROL DEVICE> under the System Setup menu, set the

<REMOTE CONTROLLER ID> and press <Apply>.

Select between 00 and 99. For more details, refer to <SYSTEM SETUP>.

The remote control will be active only if the remote control ID matches with that of the

NVR's system ID.

2. Press the [ID] button on the remote control. The default remote control ID is 00.

3. Use the number buttons to provide a two-digit ID. If you want to enter 01, for instance,

enter the number 0 and 1 in sequence.

Check if the remote control ID is set properly by manipulating the remote control.

4. To reset the ID to 00, press and hold the [ID] button.

᧭᧬

INSTALLATION

Basic Layout

Precautions

To secure recording stability from an overloaded network traffic , hacking attempt or DoS (Denial

of Service) attack, only the direct cable connection between camera and NVR is allowed.

Any access from an outside PC to the IP camera will be strictly prohibited for the purpose of

secure operation.

9Signal connection for POS andATM is scheduled to be upgraded later.

Camera

Network

Attached

Storage

CMS

Web viewer

Mobile viewer

Full HD

monitor

eSATA

Stora

Speaker

MIC

Sensor Alarm

Control

Device

POS

ATM

Access

Controlle

Otros manuales para NR4HL

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de DVR de Ganz

Ganz

Ganz PixelMaster PRO NR16H Manual de usuario

Ganz

Ganz DR16NRT Manual de usuario

Ganz

Ganz DIGIMASTER DR8HV Manual de usuario

Ganz

Ganz Digimaster Series DR8HRD Manual de usuario

Ganz

Ganz DigiMAster DR4H Manual de usuario

Ganz

Ganz ZR-DH1621NP Manual de usuario

Ganz

Ganz ZR-DH1621NP Manual de usuario

Ganz

Ganz NR8-32M78 Manual de usuario

Ganz

Ganz digimaster DR-4FX1 Manual de usuario

Ganz

Ganz digimaster DR-4FX1 Manual de usuario

Ganz

Ganz DIGIMASTER SERIES Manual de usuario

Ganz

Ganz AI BOX 4CH Manual de usuario

Ganz

Ganz DIGIMASTER SERIES Manual de usuario

Ganz

Ganz DIGIMASTER DR-16FX5-3TB Manual de usuario

Ganz

Ganz DIGIMASTER DR-16M55-RA-4TB Manual de usuario

Ganz

Ganz ZR-DHC1630NP Manual de usuario

Ganz

Ganz Digimaster DR4HL Manual de usuario

Ganz

Ganz DIGIMASTER DR4N Manual de usuario

Ganz

Ganz Digimaster DR4N-Lite Manual de usuario

Ganz

Ganz ZR-DH921NP Manual de usuario

Ganz

Ganz DR-16F44-AT Manual de usuario

Ganz

Ganz DR8NRT Manual de usuario

Ganz

Ganz ZR-DHC830NP Manual de usuario

Ganz

Ganz DR8NRT Manual de usuario

Manuales populares de DVR de otras marcas

FLIR

FLIR M3100E Series Manual de usuario

VTRACKPRO

VTRACKPRO FPRO300 Manual de usuario

Swann

Swann NVR-7085 models Manual de usuario

XtendLan

XtendLan DVR-1670C Manual de usuario

urmet domus

urmet domus 1093/004AHD Manual de usuario

Holux

Holux M1 Manual de usuario

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manual de usuario

Whistler

Whistler D16VRS Manual de usuario

Defender Security

Defender Security 82-20235 Manual de usuario

MISUMI

MISUMI MP-WF100M Manual de usuario

Speco

Speco D8HU Manual de usuario

UST

UST DDR-E04AA Instrucciones de uso

Consolidated

Consolidated Digital Video Recorder Manual de usuario

Mace

Mace DVR0404RW Guía de inicio rápido

RCA

RCA RTD315W Manual de usuario

FSM

FSM Colibri Grande PRO Manual de usuario

Hauppauge

Hauppauge HD PVR 2 Manual de usuario

Identivision

Identivision ICR-PH161i PIONEER Manual de usuario