Furuno FELCOM 19 Manual de usuario
www.furuno.com
All brand and product names are trademarks, registered trademarks or service marks of their respective holders.
Installation Manual
INMARSAT MINI-C MES
FELCOM19
SAFETY INSTRUCTIONS ................................................................................................ i
SYSTEM CONFIGURATION ........................................................................................... ii
EQUIPMENT LISTS........................................................................................................ iii
1. MOUNTING..............................................................................................................1-1
1.1 Antenna Unit ......................................................................................................................1-1
1.2 Communication Unit...........................................................................................................1-2
1.3 Junction Box IC-318...........................................................................................................1-3
1.4 AC/DC Power Supply Unit PR-240 (option).......................................................................1-4
2. WIRING....................................................................................................................2-1
2.1 Antenna Cable Connector at the Communication Unit ......................................................2-2
2.2 Junction Box IC-318...........................................................................................................2-5
3. INITIAL SETTINGS..................................................................................................3-1
3.1 How to Install Software ......................................................................................................3-1
3.2 How to Set the IMN (INMARSAT MOBILE NO.)................................................................3-3
3.3 How to Select Position-fixing Equipment ...........................................................................3-4
3.4 PC Window Setup..............................................................................................................3-5
4. HOW TO INSTALL OPTIONAL EQUIPMENT ........................................................4-1
4.1 IPX2 Kit OP16-58 (cables)/Waterproofing Kit OP16-60 (for IC-318) .................................4-1
4.2 Waterproofing Kit OP16-61 (for IC-219) ............................................................................4-2
4.3 Waterproofing Kit OP16-68 (for IC-307) ............................................................................4-4
5. HOW TO CHANGE POWER SUPPLY SPECIFICATIONS.....................................5-1
APPENDIX 1 JIS CABLE GUIDE .............................................................................AP-1
PACKING LISTS ......................................................................................................... A-1
OUTLINE DRAWINGS ................................................................................................ D-1
INTERCONNECTION DIAGRAM ................................................................................ S-1
6JGRCRGTWUGFKPVJKUOCPWCN
KUGNGOGPVCNEJNQTKPGHTGG
(74701#WVJQTK\GF&KUVTKDWVQT&GCNGT
#UJKJCTCEJQ
0KUJKPQOK[C,#2#0
# ,70
2TKPVGFKP,CRCP
#NNTKIJVUTGUGTXGF
2WD0Q +/'#
*
00017651710
*
*
00017651710
*
*+/# ('.%1/
*
00017651710
*
*
00017651710
*
i
SAFETY INSTRUCTIONS
Standard Steering
Antenna Unit IC-119
Communication Unit IC-219
AC/DC Power Supply Unit
PR-240
Do not open the equipment
unless totally familiar with
electrical circuits and
service manual.
Only qualified personnel
should work inside the
equipment.
Turn off the power at the
mains switchboard before
beginning the installation.
Post a sign near the switch
to indicate it should not be
turned on while the equip-
ment is being installed.
Fire, electrical shock or
serious injury can result if the
power is left on or is applied
while the eqiuipment is being
installed.
ELECTRICAL
SHOCK
HAZARD
0.30 m 0.30 m
0.30 m 0.30 m
Do not approach the
radome closer than 0.5 m
when it is transmitting.
Microwave radiation can
cause severe injury or
illness. Radiation level:
10 W/m2at 0.5 m
0.90 m 0.60 m
WARNING CAUTION
Junction Box IC-318
SSAS Alert Unit IC-307
0.90 m 0.60 m
0.70 m 0.45 m
Ground the equipment to prevent
electrical shock and mutual
interface.
Use the correct fuse.
Confirm that the power supply
voltage is compatible with the
voltage rating of the equipment.
Connection to the wrong power
supplycan cause fire or equipment
damage. The voltage rating appears
on the label at the rear of the
terminal unit.
Use of wrong fuse can result in
damage to the equipment.
Keep the following compass
safe distances.
ii
SYSTEM CONFIGURATION
Antenna Unit Exposed to Weather
Communication Unit Protected from Weather
Other Units Protected from Weather
PERSONAL
COMPUTER
(PC/AT compatible)
ANTENNA
UNIT
IC-119
COMMUNICATION
UNIT IC-219 (with
internal GPS receiver)
POWER SUPPLY
100-115/200-230
1φ, 50/60 Hz
POWER SUPPLY
12-24 VDC
AC/DC
Power Supply
PR-240
PRINTER
JUNCTION BOX
IC-318
SSAS ALERT UNIT*
IC-307
SSAS ALERT UNIT*
IC-307
*: At least two SSAS Alert Units are required.
CATEGORY OF UNITS
(Max. 3 units)
Navigation Equipment
(GNSS)
POWER SUPPLY
24 VDC
iii
EQUIPMENT LISTS
Standard supply
Optional supply
Name Type Code No. Qty Remarks
Antenna Unit IC-119 - 1
Communication Unit IC-219 - 1
Junction Box IC-318 - 1 For SSAS only.
SSAS Alert Unit IC-307 - 2 For SSAS only.
Installation Materials CP16-02100 000-043-411 1 For Antenna Unit
CP16-05301 001-179-990 1 For Communication unit
CP16-05101 001-180-020 1 For Junction Box, SSAS only
Spare Parts SP16-01401 004-439-530 1 For Communication unit, fuses
Accessories FP16-02700 000-021-675 1 For Communication unit, CD-R
Name Type Code No. Qty Remarks
AC/DC Power
Supply Unit
PR-240 000-013-632 1
SSAS Alert Unit IC-307 - 1
Cable Assy. COSPEVVSBC 5PX0.2LF 000-560-452-10 1 5P, 10 m
COSPEVVSBC 5PX0.2LF 000-103-868-10 1 5P, 20 m
COSPEVVSBC 5PX0.2LF 000-103-869-10 1 5P, 30m
COSPEVVSBC 5PX0.2LF 000-132-829-10 1 5P, 40 m
COSPEVVSBC 5PX0.2LF 000-132-828-10 1 5P, 50 m
Junction Box IC-318 - 1
Antenna Unit IC-119 - 1
Antenna Mount-
ing Kit CP16-03701 004-555-000 1 For IC-119
Antenna Bracket CP16-03702 001-016-260 1
Antenna Mount-
ing Pipe CP16-03703 001-014-510 1
IP22 Kit OP16-58 001-180-070 1
Water Proof Kit OP16-61 001-180-110 1 For IC-219
OP16-68 001-189-400 1 For IC-307
Installation Mate-
rials
CP16-03610 000-043-647 1 w/pipe, 30 m
CP16-03620 000-043-648 w/pipe, 50 m
CP16-03630 000-043-649 w/pipe, 100 m
CP16-05020 000-016-923 w/pipe, 30 m, for ar-
mored cable
CP16-03650 000-043-650 w/o pipe, 30 m
CP16-03660 000-043-651 w/o pipe, 50 m
CP16-03670 000-043-652 w/o pipe, 100 m
CP16-05030 000-016-924 w/o pipe, 30 m, for ar-
mored cable
EQUIPMENT LISTS
iv
This page is intentionally left blank.
1-1
1. MOUNTING
1.1 Antenna Unit
1.1.1 Mounting location
Refer to IMO resolutions A663(16) and A.807(19), as amended.
• There should be no interfering object within the line-of sight to the satellite. Objects
within line-of sight to a satellite, for example, a mast may block transmission/recep-
tion. Mount the antenna unit as high as possible. This keeps it free of interfering ob-
jects and water spray. The location should be well away from a GPS antenna. A
GPS receiver may be interfered by the Inmarsat C wave.
• If Inmarsat ship earth stations other than C are installed, separate the Inmarsat an-
tenna at least 8 m.
• Separate the antenna unit from an S-band radar as follows:
• The allowable vibration level as specified by Inmarsat is as shown in the table be-
low.
Allowable vibration level
Frequency Level
2 to 10 Hz 2.54 mm Peak Amplitude
10 to 100 Hz 9.8 m/s2 Peak Acceleration
NOTICE
Do not apply paint, anti-corrosive sealant or contact spray to
coating or plastic parts of the equipment.
Those items contain organic solvents that can damage coating and
plastic parts, especially plastic connectors.
HORIZONTAL LINE
Install above this line
PROHIBITED
ZONE
1.5 m
5 m
15
2 m
S-band radar
INSTALLTION
ZONE
2 m
1. MOUNTING
1-2
• Avoid the location near tunnels and stacks; smoke and soot on the radome can low-
er signal level (leave 10 m or more in horizontal distance).
• Separate the antenna unit 5 m from HF, VHF of 27 MHz antenna.
1.1.2 Mounting
The antenna cable is available in lengths of 30 m, 50 m and 100 m (see table below).
To mount the antenna unit, a dedicated mounting pipe is necessary.
For how to mount the antenna, see the outline drawing at the end of this manual and
“Installation and Replacement of Antenna Unit”, included with the antenna unit.
1.2 Communication Unit
Select the following place to install the communication unit.
• The temperature and humidity should be moderate and stable.
• For maintenance and checking purposes, leave sufficient space at the sides and
rear of the unit and leave slack in cables.
Mounting
Use two self-tapping screws (4x40, supplied) to fix the communication unit. The unit
can be mounted on a bulkhead, a tabletop or on the underside of table. Use the fixing
holes at the top for bulkhead mounting, or the fixing holes at the bottom for tabletop
mounting or underside of a table.
After mounting the unit, cover the screw heads with the cosmetic caps (2 pcs, sup-
plied) to fixing hole to cover the screw head. Note that the rear panel should be down-
ward when the communication unit is mounted on the bulkhead.
Cable length Type Remarks
30 m (no armor) TP5FBAW-5DFB TNC connector at both ends
30 m (w/armor) 5D-FB-CV-NP N connector on one end (antenna side)
50 m (w/armor) 8D-FB-CV
100 m (w/armor) 12D-SFA-CV
Fixing hole
(two, φ4.5)
Rear panel
(top view)
(front view)
1. MOUNTING
1-3
How to connect the LAN cable
Use two binding screws (pre-attached) and the LAN cover to connect the LAN cable
to the communication unit. Use the cable tie (supplied) to fix the cable.
1.3 Junction Box IC-318
The junction box IC-318 is connected to the communication unit by using the cable
assy 16S0344 (2 m, attached to the junction box). Install the junction box within 2 m
from the communication unit.
1. Remove four screws from the unit to separate the bottom chassis from the top
chassis.
2. Fix the bottom chassis to the mounting location with four self-tapping screws
(4x16, supplied).
3. Connect the cables referring to Chapter 2.
Junction box IC-318
LAN cover
Fix the cable here with a cable tie.
1. MOUNTING
1-4
1.4 AC/DC Power Supply Unit PR-240 (option)
Fix the unit on a table with four self-tapping screws.
AC/DC power supply unit
Tabla de contenidos
Otros manuales de Terminal táctil de Furuno
