Furrion FOS07TASR Manual de usuario
* The packing contents may be different based on the kit you purchased. Please take the actual
product as standard.
Vision S Camera System
User Manual
Models:
FOS07TASR / FOS07TASF / FOS07TAED / FOS07TAPT / FOS05TASR / FOS05TASF
FOS05TAED / FOS05TAPT / FOS43TASR / FOS43TASF / FCN48TASK / FCN48TASF
FCE48TASL / FOS43TDDC / FOS05TAEN / FSO07TAEN / FOS05TAEM / FOS07TAEM
FOS05TASM / FOS07TASM / FOS43TASM / FOS07TAPM
2
Welcome
Thank you for purchasing the Furrion® Vision S Camera System. Before operating your new
product, please read these instructions carefully. This will ensure safe use and reduce the risk of
injury. This instruction manual contains information for installation, maintenance of the product
and safe use.
Please keep this instruction manual in a safe place for future reference. Be sure to pass on this
manual to any new owners of this product.
The manufacturer does not accept responsibility for any damages due to not observing these
instructions.
3
Contents
Welcome......................................................................................................................... 2
Contents......................................................................................................................... 3
Important Safety Instructions..................................................................................... 4
FCC Statement..........................................................................................................................................................5
IC Statement.............................................................................................................................................................. 6
Care and Cleaning....................................................................................................................................................7
Maintenance .................................................................................................................. 7
Product Overview ......................................................................................................... 8
Install and Use Monitor................................................................................................12
Install and Use 4.3” Monitor................................................................................................................................12
Install and Use 5”/7” Monitor .............................................................................................................................18
Install Cameras............................................................................................................28
Install Doorway Security/Rear Camera ......................................................................................................28
Install Side Cameras & Rear Camera withMarker Light.......................................................................31
Troubleshooting..........................................................................................................34
4
Important Safety Instructions
Generic safety instructions
READ THESE INSTRUCTIONS
CAREFULLY BEFORE INSTALLING OR
USING THE SYSTEM
When used as an observation system, this
product is intended to assist in safe driving
and to allow the driver to have a broader view.
Do not back up your vehicle while watching
the monitor screen. Always look in the
direction the vehicle is traveling.
Use the monitor as an aid to ensure there are
no children or obstructions. The image on
the monitor is not designed to show distance
and may be misleading. The actual distance
is less than what appears in the monitor. The
range of the image is limited. Be aware of
blind spots.
You, as the driver, are solely responsible for
the safe operation of your vehicle and the
safety of your passengers according to your
local traffic regulations.
Do not use any features of this system to the
extent it distracts you from safe driving.
Your first priority while driving should
always be the safe operation of your vehicle.
Furrion cannot accept any responsibility for
accidents resulting from failure to observe
these precautions or safety instructions.
1. This product utilizes high voltage. Any
unauthorized modifications or damage to
the product may result in electrical shock.
Handle all components with care. Inspect
regularly for damage to components and
cabling.
2. You are responsible for ensuring the
installation of this product does not void
or affect the vehicle manufacturer’s
warranty. Furrion is not liable in full or in
part for improper installation resulting
in loss or damage to your property,
or for voiding all or part of the vehicle
manufacturer’s warranty.
3. Do not apply excessive force to any of
the components contained within this
kit. Excessive force used before, during
or after installation that results in a
damaged or nonfunctional part will void all
warranties.
4. Please follow the procedures in this
instruction manual. Improper installation
or modification of this product will void all
warranties.
Many jurisdictions have laws and regulations
relating to the use of cameras and some do
not allow for the obstruction of information
contained on a license plate. Before using this
product, it is the buyer’s responsibility to be
aware of and comply with any applicable laws
and regulations that apply to license plates or
may prohibit or limit the use of cameras.
Electrical Safety
●Ensure all power sources are isolated
before installation.
●Insulate unconnected wires with vinyl
tape or similar.
●Use insulated tools when working with a
power supply.
●For EU countries:
−The Vision S product shall be powered by
12V or 24V external power supply, with
a properly sized fuse or breaker (5A for
12V or 3A for 24V) mounted between the
product and power supply.
−The external power supply used with
this product shall comply with the LPS
(Limited Power Source) requirements or
shall be a Power Source Class 2 (PS2)
with less than 100W.
Caution
●There are no serviceable parts in the
Furrion®Vision S Camera System. Do not
disassemble or attempt any repairs.
●Install external fuses/breakers as
required.
5
Important Safety Instructions
Installation
●Installation and wiring of this product
require specialist skills. To ensure proper
and safe installation, please seek a
specialist technician.
●Only use supplied or recommended parts.
●Use watertight connectors for the camera
power supply cable to power source.
●Connect the camera to a 12-24V DC
circuit using 18AWG or larger cables.
●Ensure correct polarity of DC power
supply to the camera.
●To reduce the risk of fire, connect the
camera only to a circuit provided with
a maximum branch-circuit over current
protection device.
●Do not route wiring in areas that may get
hot.
●Take necessary precautions when working
at elevated levels.
Use
●Electrical appliances and overhead power
lines can affect the wireless signal.
●Do not place the monitor in a location
where it might hinder field of vision while
driving.
●Consideration should be given to any
airbags when installing the monitor. Do
not place the monitor where it might
hinder the airbag or become hazardous if
the airbag is deployed.
Care
●Do not wash the vehicle with an automatic
car wash or high pressure water. This may
damage the camera.
●Clean the LCD screen with a microfiber
cloth. Do not use coarse or abrasive
materials.
●Do not use alcohol or ammonia based
products to clean the LCD screen. Only
use specialist screen cleaning products.
●Use a wet cloth to clean the camera lens.
A dry cloth may scratch the camera lens.
FCC Statement
The equipment complies with RF exposure
limits. This module is limited to installation
in mobile or fixed applications. The antenna
used for this transmitter must not be co-
located or operating in conjunction with any
other antenna or transmitter.
This device complies with Part 15 of the
FCCRules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference.
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
NOTE: The Grantee is not responsible for
any changes or modifications not expressly
approved by the party responsible for
compliance. Such modifications could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to part
15 of the FCCRules. These limits are
designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy
and, ifnot installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
6
Important Safety Instructions
−Reorient or relocate the receiving
antenna.
−Increase the separation between the
equipment and receiver.
−Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
−Consult the dealer or an experienced
radio/TV technician for help.
RF Exposure
The device has been evaluated to meet
general RF exposure requirement.
To maintain compliance with FCC’s RF
exposure guidelines, this equipment should
be installed and operated with a minimum
distance of 20cm between the radiator and
your body.
IC Statement
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation
is subject to the following two conditions:
(1)this device may not cause interference,
and (2)this device must accept any
interference, including interference that may
cause undesired operation of the device.
RF Exposure
The device has been evaluated to meet
general RF exposure requirement. To
maintain compliance with RSS-102 — Radio
Frequency (RF) Exposure guidelines, this
equipment should be installed and operated
with a minimum distance of 20cm between
the radiator and your body.
7
Maintenance
Care and Cleaning
Though your monitor requires little care, you will still need to maintain its condition and
performance by following the guidelines below.
●Keep the unit away from excessive moisture, or extreme heat or cold.
●Keep liquids away from the monitor.
●Occasionally clean the surface of the monitor with a soft cloth moistened with water or glass
cleaner.
Only clean the monitor with dry cloth. Do not clean it with strong chemical agents or abrasive
cleaners. Never spill liquid of any kind on the product. Do not allow residue or liquids to enter
any part of the monitor as this may cause risk of electrocution. Always disconnect power before
cleaning.
CAUTION: Never use solvents such as benzene, thinner or cleaners available commercially to
clean the monitor.
8
Product Overview
Furrion offers you abundant options to set up an observation / security system for your vehicle.
You can mount Furrion Vision S products onto various types of RVs such as trailers and Class
A/B/C motorhomes.
The full range of Vision S wireless monitor and camera products available for your selection
is listed below, which are sold either separately or as part of a system. Check all items in your
package against the ‘What’s in the box’ section on the packaging box to ensure you have got
all the items. You can click an icon below to jump to the corresponding section for detailed
description.
Part Number Description Product
FOS07TASR Vision S 7” Single Camera
System with Marker Light 7”
FOS07TASF Vision S 7” Single Camera
System 7”
FOS07TAED Vision S 7” 3-Camera
System with Marker Lights 7”
FOS07TAPT Vision S 7” 4-Camera
System with Marker Lights 7”
FOS05TASR Vision S 5” Single Camera
System with Marker Light 5”
FOS05TASF Vision S 5” Single Camera
System 5”
FOS05TAED Vision S 5” 3-Camera
System with Marker Lights 5”
FOS05TAPT Vision S 5” 4-Camera
System with Marker Lights 5”
FOS43TASR
Vision S 4.3” Single
Camera System with
Marker Light
4.3”
FOS43TASF Vision S 4.3” Single
Camera System 4.3”
FCN48TASK Vision S Rear Camera
FCN48TASF Vision S Doorway Security
or Rear Camera
FCE48TASL
Vision S Side Cameras with
Marker Lights for 5” or 7”
Display
9
Product Overview
FOS43TDDC Vision S 4.3” Display 4.3”
FOS05TAEN
Vision S 5” 3-Camera
System with Side LED
Marker Lights
5”
FSO07TAEN
Vision S 7” 3-Camera
System with Side LED
Marker Lights
7”
FOS05TAEM
Vision S 5” 3-Camera
System with Side and Rear
LED Marker Lights
5”
FOS07TAEM
Vision S 7” 3-Camera
System with Side and Rear
LED Marker Lights
7”
FOS05TASM
Vision S 5” Single Camera
System with LED Marker
Light
5”
FOS07TASM
Vision S 7” Single Camera
System with LED Marker
Light
7”
FOS43TASM
Vision S 4.3” Single
Camera System with LED
Marker Light
4.3”
FOS07TAPM
Vision S 7” 4-Camera
System with LED Marker
Lights
7”
10
Product Overview
Note: Product specifications are subject to change without prior notice.
Vision S Family Monitor Specification
4.3" Monitor 5" Monitor 7" Monitor
Operating Voltage 8 – 30Vdc
Wireless Frequency 2.4G
Rx Sensitivity -88dBm+/-3dBm
Aspect Radio 16:9
Resolution 480x272 800x480 800x480
Max View on Screen 1 4 4
View Angle L/R65,U50,D60 L/R80,U60,D70
Brightness Min. 200cd/m² Min. 300cd/m² Min. 180cd/m²
Contract 350:1 600:1 800:1
Power Consumption
(@12V)
<500mA @12V (Backlight ON)
<300mA @12V (Backlight OFF)
<30mA @ 12V (Display OFF)
Operating
Temperature -20°C to +60°C
Otros manuales para FOS07TASR
1
Este manual sirve para los siguientes modelos
21
Tabla de contenidos
Otros manuales de Cámara digital de Furrion
