FUNKY MONKEY BARS THE SILVERBACK Manual de usuario
THE SILVERBACK
ASSEMBLY INSTRUCTIONS
CONTENTS
Warnings and Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2
Load Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4
Assembly Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5
Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7
Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 9
Side Dip Bar Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 9
Dip Bar Leg Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 10
Dip Bar Station Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 11
Horizontal Gym Bars Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 13
Chin Up Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 16
Twirly Whirly Bar Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 17
Final Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 19
Page 1
SAFETY NOTICE
1. Any person handling or using the Funky Monkey Bars® products must follow the instructions as described
in this document. The person in charge of assembling and using the equipment must ensure that the
recommendations for use given in this document are seen by all users.
2. Only use the Funky Monkey Bars® after they have been fully assembled and after checking that the
fittings are tightened properly (refer to page 5 - Correct Tightening Method).
3. DO NOT install your Funky Monkey Bars® over concrete, asphalt, packed earth, wood decking or any
other hard surface. A fall onto a hard surface can result in serious injury or death.
4. Inspect all grub screws, bolts and nuts at the beginning of each play session to ensure your Funky Monkey
Bars® are tight and secure.
5. Ensure all tubes are fully inserted into fittings until you hear the magic “CLUNK” sound.
6. Ensure your Funky Monkey Bars® are properly secure at ALL times. Pegs are in place and inserted fully into
the ground.
7. DO NOT exceed the maximum load/weight limit as recommended by Funky Monkey Bars®.
8. Children should be supervised by an adult at all times.
9. Installing a gym/crash mat under the fall zone area of your Funky Monkey Bars® would be recommended
for children learning this new skill. This will reduce the chance of injury and build the child’s confidence
while they build strength and master the skill.
10. Ensure you have thoroughly read your assembly and installation instructions and viewed our on-line
installation videos at https://www.funkymonkeybars.com/blogs/installation-maintenance-videos
11. DO NOT climb, sit or stand on top of the monkey bar (horizontal ladder) section.
12. DO NOT jump from the top of any section of the monkey bar.
13. DO NOT use your Funky Monkey Bars® when wet as the steel will be slippery.
14. DO NOT attach items to your frame that are not designed specifically to be used with Funky Monkey
Bars®, especially lower quality products that have not been approved by Funky Monkey Bars®.
15. Ensure the height of your Funky Monkey Bars® (horizontal ladder) are set at a level that is age appropriate.
16. DO NOT install your Funky Monkey Bars® over or near objects that could interfere with users in an unsafe
way. Maintain a clear area around your Funky Monkey Bars®.
17. DO NOT use your Funky Monkey Bars® while under the influence of drugs and alcohol.
18. Wear clothing free of drawstrings, hooks, loops or anything that could get caught while using your Funky
Monkey Bars® and result in entanglement and/or strangulation.
WARNING
PLEASE CAREFULLY READ ALL INFORMATION CONTAINED IN THIS ASSEMBLY MANUAL BEFORE
YOU INSTALL AND USE YOUR FUNKY MONKEY BARS®.
WARNINGS
Page 2
LOCATION
1. A safe fall zone around your Funky Monkey Bars® is essential. A minimum distance of 1.5m to 2m (5 ft to
6.5ft) is recommended around the elevated hanging points of your Funky Monkey Bars®.
2. Place your Funky Monkey Bars® on level ground, away from any structure or obstruction such as a fence,
garage, house, overhanging branches, laundry lines or electrical wires and remove any obstructions
beneath your Funky Monkey Bars®.
3. Ensure your Funky Monkey Bars® are positioned away from retaining walls, pool fences, structures and
other play equipment. Maintain a clear space around the whole perimeter of your Funky Monkey Bars®.
4. Place your Funky Monkey Bars® on the most level surface available.
MAINTENANCE
1. At the beginning of each heavy play session we recommend the following maintenance processes be
performed on your Funky Monkey Bars®:
• Tighten all bolts, grub screws and applicable hardware (as per page 5)
• Lubricate all metallic moving parts as per instructions (flying fox, swing hooks etc)
• Check all protective coverings on bolts, pipes, edges and corners. Replace if they are loose,
cracked or missing.
• Check all moving parts including swing seats, shackels, snap hooks, chains and trolleys for wear,
rust, or other deterioration. Replace as needed.
2. Twice a month during play season we would recommend the following maintenance processes be
performed on your Funky Monkey Bars®:
• Tighten all connections and hardware
• Check all protective coverings on bolts, pipes, edges and corners. Replace if they are loose,
cracked or missing.
3. Once a month during play season we would recommend the following maintenance processes be
performed on your Funky Monkey Bars®:
• Lubricate all metallic moving parts as per instructions (flying fox, swing hooks etc). If swings start
to squeek then lubricate swing hooks.
• Check all moving parts including swing seats, ropes, chains and trolleys for wear, rust, or other
deterioration. Replace as needed.
• Owners shall be responsible for maintaining the legibility of any warning labels.
For additional information concerning your Funky Monkey Bars®, please contact our customer service team
or check our website for any important updates. Phone -1300 912 198 or www.funkymonkeybars.com
Assembly requires 2 adults. Heavy items ! Work on flat level surface.
ASSEMBLY
1. Keep small children away from the Funky Monkey Bars® during assembly.
2. Do not attempt to use the Funky Monkey Bars® until it is completely assembled and every fitting is tight
and secured.
3. Installation typically takes 2-3 hours to complete. Two people are recommended for assembly.
4. Ensure all fittings are tightened to the correct tightening method as described on page 5.
5. Assembly should be carried out on clean, dry, level surface
Please refer to the video section on the Funky Monkey Bars® website for more handy tips and assembly
instructions at http://www.funkymonkeybars.com/pages/videos
LOAD RATING
Page 3
QUALITY & INDEPENDENT TESTING
At Funky Monkey Bars® we take the quality of our designs and safety very seriously. All Funky Monkey Bars® frames
go through a stringent, independent structural testing process prior to being made available for release to our
customers.
Our frames are designed within the parameters of the Australian Standard for Playground Equipment AS4685.1:2014.
The structural integrity of our frames has been tested for performance through a combination of engineering
calculations and physical testing. The tests have been performed by independent, certified structural engineers in
accordance with Australian Standard for Playground Equipment AS4685.1:2014 and European Standards
EN1176-1:2008.
The independent testing conducted on The Silverback certified the frame to a load rating of 700kgs or 12 users.
N/A
WITNESSED BY:
MODEL
APPROVED BY:
60
12
LOAD TESTING CERTIFICATION
DATE :
COMMENTS:
DATE OF TEST
700
DATE :
I hereby confirm all testing was undertaken in accordance with Physical Testing of Structural Integrity
requirements of AS 4685.1: 2014 App C / EN 1176-1:2008° except where noted below;
The SilverbackJuly 2020
July 2020
Funky Monkey Bars® Independent Engineer
July 2020
USER LOAD
(KG)
NUMBER
OF USERS
LOAD RATING
(KG)
Page 4
DIMENSIONS
PLAN VIEW
FUNKY MONKEY BARS®
THE SILVERBACK OVERALL DIMENSIONS
2.03 Metres
2.0 Metres clear fall zone
A mimimum of 2.0 Metres clear fall zone
is recommended around the elevated
hanging points of your Funky Monkey Bars®.
(not to scale)
2.0 Metres
clear fall zone
preferred.
1.26 Metres
1.75 Metres
2.0 Metres
clear fall zone
preferred.
2.0 Metres
clear fall zone
2.2 Metres
.45 M
SIDE VIEW
(not to scale)
FRONT VIEW
(not to scale)
1.2 Metres 1.2 Metres
2.03 Metres 2.2 Metres
.4 M
3 Metres
.95 Metres
.95 Metres
Varies
Varies
Varies
1.2 Metres
.95 Metres
.55 M
TYPICAL FITTING ORIENTATION - (indicative diagram shown)
Unless otherwise stated all grub
screws and fittings should face
downwards and outwards. This will
reduce weathering damage, help with
assembly and ease of maintenance.
Page 5
All tubes must be fully inserted
until contact is made with
adjoining tube.
CORRECT INSERTION INTO FITTINGS - (indicative diagram shown)
CORRECT TIGHTENING METHOD OF GRUB SCREWS - (indicative diagram shown)
Gap. No gap.
CLUNK
1. With long end of allen key, hand
tighten grub screw as much as possible.
2. Using other end of the allen key do one full
360 degree turn as a minimum, use muscles!
ASSEMBLY TIPS
o
+ 360
Page 6
Check assembly is 100%
level, square & straight.
PLAN VIEW
SIDE VIEW
IT IS CRITICAL YOUR MAIN FRAME IS 100% SQUARE AND LEVEL
(indicative diagram shown)
IF YOUR FRAME IS NOT STRAIGHT OR LEVEL REMOVE PEGS, LOOSEN GRUB SCREWS,
RE-ADJUST RE-TIGHTEN AND RE-PEG THE FRAME.
ASSEMBLY TIPS (continued)
INSTALLATION ON A SLOPE
If your frame is being installed on a slope ensure the monkey
ladder bar is level. Either install at different heights on the legs
or dig down at one end until level.
1x
8mm Allen key
(Included)
1x
Soft Hammer
(Not included)
TOOLS REQUIRED FOR INSTALLATION
1x
Spirit Level
(Not included)
Page 7
INVENTORY
1x
Tape Measure
(Not included)
1x
17mm Rachet
(For accessories-not included)
50Dia. x 900mm
50Dia. x 2950mm
50Dia. x 1085mm
50Dia. x 450mm
2x
Dip Vertical Tube
TUBES
4x
Long Gym
Leg Tube
2x
Vertical
Twirly Tube
2x
Horizontal Short
Twirly Tube
33Dia. x 1085mm
1x
Chin up Tube
50Dia. x 1085mm
4x
Dip/Gym Horizontal
Black Tube
50Dia. x 450mm
2x
Brace Tube
SUPPLIED BOXES.
QUANTITY. CODE. DESCRIPTION.
2 F2
1 H2 4x Onyx 1085mm + 2x Silver 1085mm + 1x Silver 1085mm Chin up
1 H3 2x Silver 900mm + 4x Silver 450mm
1 Q22
1 Q25
4 (Total) x Silver 2950mm Accessories Tubes
Fittings and Hardware
Fittings and Hardware
NOTE: The Silverback frame comprises of a total of 6 boxes:
Total 6
1x
Manufacture Sticker
4x
Plastic End Cap
Page 8
INVENTORY (continued)
HARDWARE
COMPONENTS (not applicable)
One of the best things about a Funky Monkey Bar is the ability to add new equipment and
accessories as your child and family grows. You can swap or add accessories to your existing
frame, or add extra frames that will give you more versatility to attach equipment. Check out
what we’ve got in store now at...
WWW.FUNKYMONKEYBARS.COM
FITTINGS
12x
Short Tee
D-101
4x
Elbow
D-125
8x
Base Plate
D-131
8x
Peg
2x
Reducing Tee
D-101 D48-B34
Tighten all grub screws.
+ 360
o
1. On flat level ground fully insert
2x elbows into 1x dip horizontal
tube (black).
2. Firmly tighten all grub screws.
ASSEMBLE DIP BAR
1x Dip Horizontal Tube
50Dia x 1085mm - Black
2x Elbow
D-125
1. Flip dip bar assembly over
so grub screws are facing
downwards.
2. Insert vertical dip bars into
elbows then slide on short tees
followed by base plates.
3. Firmly tighten all grub screws.
2x Dip Vertical Tube
50Dia x 1085mm
2x Elbow
D-125
1. Insert brace bars into short tees.
2. Firmly tighten all grub screws.
1
ASSEMBLE DIP BAR LEGS
2
Page 9
ASSEMBLY INSTRUCTIONS - SIDE DIP BAR ASSEMBLY
ATTACH BRACE BARS
3
2x Base Plate
D-131
2x Brace Tube
50Dia x 450mm
Tabla de contenidos
Otros manuales de Juegos y equipos de juegos infantiles de FUNKY MONKEY BARS
FUNKY MONKEY BARS
FUNKY MONKEY BARS Spider Monkey Manual de usuario
FUNKY MONKEY BARS
FUNKY MONKEY BARS THE CHEEKY LITTLE MONKEY Manual de usuario
FUNKY MONKEY BARS
FUNKY MONKEY BARS Boxing Bag Manual de usuario
FUNKY MONKEY BARS
FUNKY MONKEY BARS ROCKET RINGS Manual de usuario
FUNKY MONKEY BARS
FUNKY MONKEY BARS THE TAMARIN Manual de usuario
FUNKY MONKEY BARS
FUNKY MONKEY BARS Floating Flying Fox Manual de usuario
FUNKY MONKEY BARS
FUNKY MONKEY BARS THE GORILLA Manual de usuario
FUNKY MONKEY BARS
FUNKY MONKEY BARS MONKEY BAR ADD-ON Manual de usuario
FUNKY MONKEY BARS
FUNKY MONKEY BARS THE AERIAL TAMARIN Manual de usuario
FUNKY MONKEY BARS
FUNKY MONKEY BARS CARGO NET Manual de usuario
FUNKY MONKEY BARS
FUNKY MONKEY BARS Floating Flying Fox Manual de usuario
FUNKY MONKEY BARS
FUNKY MONKEY BARS THE ORIGINAL Manual de usuario
FUNKY MONKEY BARS
FUNKY MONKEY BARS THE COMBAT NINJA Manual de usuario
FUNKY MONKEY BARS
FUNKY MONKEY BARS Floating Accessories Bar Manual de usuario
FUNKY MONKEY BARS
FUNKY MONKEY BARS THE MANDRILL PLUS Manual de usuario
FUNKY MONKEY BARS
FUNKY MONKEY BARS SWINGING CUBBY Manual de usuario
FUNKY MONKEY BARS
FUNKY MONKEY BARS THE LEMUR Manual de usuario
FUNKY MONKEY BARS
FUNKY MONKEY BARS THE CHIMP Manual de usuario
FUNKY MONKEY BARS
FUNKY MONKEY BARS FIREMANS POLE Manual de usuario
FUNKY MONKEY BARS
FUNKY MONKEY BARS THE TROOP Manual de usuario
Manuales populares de Juegos y equipos de juegos infantiles de otras marcas
Ledon
Ledon 302040 Manual de usuario
FUNormous
FUNormous Disney Junior MICKEY MOUSE Manual de usuario
b4Adventure
b4Adventure Slackers TREEZONE ADVENTURE THREE HOUSE Manual de usuario
PoolMaster
PoolMaster 72775 Manual de usuario
Palmako
Palmako 4743142009857 Manual del instalador
BOERPLAY
BOERPLAY PSTE000.019 Manual de usuario
