Fujitsu Primergy TX300 S4 Manual de usuario

PRIMERGY TX300 S4

Options Guide

Edition April 2008

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected].

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability. The right to technical modification is reserved.

All hardware and software names used are trade names and/or trademarks of their respective

manufacturers.

TX300 S4 Options Guide

Contents

1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.1 Concept and target groups . . . . . . . . . . . . . . . . . . . 7

1.2 Documentation overview . . . . . . . . . . . . . . . . . . . . 7

1.3 Expansions and conversions . . . . . . . . . . . . . . . . . . 9

1.4 Notational conventions . . . . . . . . . . . . . . . . . . . . 11

2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 15

4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4.1 Floorstand model . . . . . . . . . . . . . . . . . . . . . . . . 21

4.1.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 21

4.1.2 Removing the front cover . . . . . . . . . . . . . . . . . . . . 22

4.2 Rack model . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

4.2.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 24

4.2.2 Removing the rack front cover . . . . . . . . . . . . . . . . . . 27

4.3 Removing the air duct . . . . . . . . . . . . . . . . . . . . . 28

4.4 Removing system fans . . . . . . . . . . . . . . . . . . . . . 29

4.4.1 Removing the standard fan module . . . . . . . . . . . . . . . 29

4.4.2 Removing the redundant processor fan module . . . . . . . . . 30

5 Main memory . . . . . . . . . . . . . . . . . . . . . . . . . . 31

5.1 Equipping rules . . . . . . . . . . . . . . . . . . . . . . . . . 31

5.2 Expanding/replacing the main memory . . . . . . . . . . . . 34

OptionsGuide TX300 S4

Contents

6 Accessible drives . . . . . . . . . . . . . . . . . . . . . . . . 39

6.1 Equipping of the bays . . . . . . . . . . . . . . . . . . . . . . 39

6.2 Installing an accessible 5.25-inch drive . . . . . . . . . . . . 40

6.2.1 Attaching the EasyClick rails . . . . . . . . . . . . . . . . . . . 43

6.3 Installing a multibay module . . . . . . . . . . . . . . . . . . 45

6.3.1 Removing the dummy cover . . . . . . . . . . . . . . . . . . . 46

6.3.2 Installing LSP or LSD . . . . . . . . . . . . . . . . . . . . . . . 46

6.3.3 Installing a slimline CD-/DVD drive . . . . . . . . . . . . . . . . 48

6.3.4 Installing a slimline floppy disk drive . . . . . . . . . . . . . . . 51

6.4 Installing a hard disks extension box . . . . . . . . . . . . . 56

6.4.1 Preparing the hard disk extension box . . . . . . . . . . . . . . 56

6.4.2 Variant 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

6.4.3 Variant 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

7 Expansion cards and BBU . . . . . . . . . . . . . . . . . . . 61

7.1 Installing an expansion card . . . . . . . . . . . . . . . . . . 61

7.2 Installing battery backup units . . . . . . . . . . . . . . . . . 64

8 SAS-/SATA-RAID controller . . . . . . . . . . . . . . . . . . . 71

8.1 Inserting the RAID key . . . . . . . . . . . . . . . . . . . . . 71

9 Processors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

9.1 Installing a second processor . . . . . . . . . . . . . . . . . 73

9.2 Replacing the processor . . . . . . . . . . . . . . . . . . . . 80

9.3 Replacing the heat sink . . . . . . . . . . . . . . . . . . . . . 83

10 Parallel interface . . . . . . . . . . . . . . . . . . . . . . . . . 85

10.1 Installing a parallel interface . . . . . . . . . . . . . . . . . . 85

11 Upgrading to redundant system fans . . . . . . . . . . . . . 89

TX300 S4 Options Guide

Contents

12 Conversion standard PS to hot-plug PS . . . . . . . . . . . 95

12.1 Removing the standard PS . . . . . . . . . . . . . . . . . . 96

12.2 Installing the PS insertion . . . . . . . . . . . . . . . . . . . 99

12.3 Installing PSU modules . . . . . . . . . . . . . . . . . . . . 107

12.3.1 Configuration A: two PSU modules . . . . . . . . . . . . . . . 107

12.3.2 Configuration B: one PSU module and one dummy cover . . . 108

13 Conversion from a floorstand model to a rack model . . . . 109

14 Completion . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

14.1 Installing system fans . . . . . . . . . . . . . . . . . . . . . 113

14.1.1 Installing the standard fan module . . . . . . . . . . . . . . . . 113

14.1.2 Installing the redundant processor fan module . . . . . . . . . 114

14.2 Installing the air duct . . . . . . . . . . . . . . . . . . . . . . 115

14.3 Floorstand model . . . . . . . . . . . . . . . . . . . . . . . . 116

14.3.1 Attaching the front cover . . . . . . . . . . . . . . . . . . . . . 116

14.3.2 Closing the server . . . . . . . . . . . . . . . . . . . . . . . . 118

14.4 Rack model . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

14.4.1 Attaching the rack front cover . . . . . . . . . . . . . . . . . . 119

14.4.2 Closing the server . . . . . . . . . . . . . . . . . . . . . . . . 120

15 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

15.1 Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135

TX300 S4 Options Guide 7

1 Preface

The PRIMERGY TX300 S4 Server is an Intel-based server for medium-sized

and large networks. The server is suitable for use as a file server and also as

an application, information or Internet server. It is available as a floorstand or

rack model. The floorstand model can be converted to a rack model using an

optional conversion kit.

1.1 Concept and target groups

This Options Guide shows you how to extend and upgrade your server.

VCAUTION!

The activities described in this manual may only be performed by

technical specialists.

IThe installation and removal of the hot-plug components is described in

the Operating Manual supplied with the server.

1.2 Documentation overview

More information on your PRIMERGY TX300 S4 can be found in the following

documents:

– “Quick Start Hardware - PRIMERGY TX300 S4” leaflet (only included as a

printed copy)

– “Quick Start Software - Quick Installation Guide” leaflet (only included as a

printed copy)

– “Safety notes and other important information” manual

– “Warranty” manual

– “Customer Self Service (CSS)” manual

– “Ergonomics” manual

– “Returning used devices” manual

– “Helpdesk” leaflet

– Technical manual for the system board D2529

8 OptionsGuide TX300 S4

Documentation overview Preface

– “PRIMERGY TX300 S4 Server Operating Manual”

– “PRIMERGY TX300 S4 Server Options Guide”

– “BIOS Setup V4.06 / FirstBIOS Desktop Pro V5.0 /TrustedCoreTM V6.0”

manual

– “Integrated Mirroring User’s Guide”

IPRIMERGY manuals are available in PDF format on the ServerBooks

DVD. The ServerBooks DVD is part of the ServerView Suite supplied with

every server.

The PDF files of the manuals can also be downloaded free of charge

from the Internet. The overview page showing the online documentation

available on the Internet can be found using the URL:

http://manuals.fujitsu-siemens.com. The PRIMERGY server documentation

can be accessed using the Industry standard servers navigation option.

If you need a replacement copy of the ServerBooks DVD, send the

details of your server to the following e-mail address: Reklamat-PC-

[email protected]

Further sources of information:

– Manual for the monitor

– Documentation for boards and drives

– Documentation for your operating system

– Information files on your operating system

TX300 S4 Options Guide 9

Preface Expansions and conversions

1.3 Expansions and conversions

Main memory expansion

Two slots for riser cards with 8 FBD slots each are available. Each memory

bank can be populated with two 512 Mbyte, 1 Gbyte, 2 Gbyte or 4 Gbyte FBD

PC2-4200F or FDB PC2-5300F fully buffered DIMM memory modules.

The memory modules must be equipped in pairs. A memory bank must always

be equipped fully with the same type of memory modules.

There are three modes of operation for the main memory: non-mirrored mode,

mirrored mode (recommended) and sparing mode. Depending on the mode of

operation there are different population requirements.

Second processor

The system board can be upgraded with a second processor. Only processors

of the same type may be used on the system board. That means the number of

the internal processor cores as well as the primary clock and the FSB frequency

have to be the same. For dual operation, use a suitable multiprocessor

operating system.

Additional accessible drives

Three 5.25-inch bays are available for accessible drives. There can be installed

DVD/DVD-RX drives, tape drives, a multibay (slimline DVD and FDD,

ServerView Local Service Panel or Display) or a hard disks extension box.

Hard disks extension box

In the base units two 5.25-inch bays for accessible drives can be used to install

a hard disks extension box.

Two variants of the hard disks extension box are available:

– Variant 1:

one bay for a ServerView Local Service Panel (LSP) or ServerView Local

Service Display (LSD), one bay for a slimline DVD drive and two bays for 3.5-

inch hard disk drives

– Variant 2 (only possible if the system is equipped with 2.5-inch hard disk

drives):

eight bays for 2.5-inch hard disk drives

10 OptionsGuide TX300 S4

Expansions and conversions Preface

Additional expansion cards in PCI slots

The server has one standard PCI slot and six PCI express slots. Of these six

PCI express slots, four are x4 slots and two potential x8 slots. The capacity of

the two x8 slots depends on how all the PCI express slots are filled.

RAID key

The SATA SW RAID 5 functionality will be activated by installing a license key

(RAID key) on the SAS/SATA controller.

Battery Backup Unit

In case of an outage the battery backup (BBU) unit stores the memory contents.

Per expansion card one BBU can be installed. Per system maximum two BBUs

can be installed.

Parallel interface

As an option, a parallel interface can be provided.

Upgrading to redundant system fans

The standard fans can be upgraded to redundant system fans. If the redundant

system fans are installed, the fans are operating in a redundant configuration. A

defective system fan can be replaced during the next service.

Conversion standard power supply to hot-plug power supply

The standard power supply can be replaced by a hot-plug power supply. The

hot-plug power supply consists of two power supply modules. The conversion

kit contains only one power supply module, you have to order the second power

supply separately.

If one power supply module fails, the other power supply module guarantees the

unrestricted operation and the defective power supply module can be replaced

be replaced while the system is operating (hot-plug).

Conversion from a floorstand model to a rack model

The floorstand model can be optionally converted to allow the server to be

installed into any typical rack systems.

Otros manuales para Primergy TX300 S4

Tabla de contenidos

Otros manuales de Servidor de Fujitsu

Fujitsu

Fujitsu SPARC Enterprise T2000 Manual de servicio

Fujitsu

Fujitsu PRIMERGY TX100 S2 Manual de usuario

Fujitsu

Fujitsu SPARC Enterprise M4000 Manual de usuario

Fujitsu

Fujitsu FW-S Series SERVIS Manual de usuario

Fujitsu

Fujitsu PRIMERGY BX900 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX2540 M1 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX100 S3 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX150 S8 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX4770 M5 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX200 S7 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX900 S1 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX200 S5 Manual de usuario

Fujitsu

Fujitsu PRIMEQUEST 580A Manual técnico

Fujitsu

Fujitsu PRIMERGY TX2560 M1 Manual de usuario

Fujitsu

Fujitsu Primergy RX300 S4 Guía

Fujitsu

Fujitsu SPARC Enterprise M3000 Manual de servicio

Fujitsu

Fujitsu PRIMERGY RX2530 M1 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX1320 M3 Manual de usuario

Fujitsu

Fujitsu BS2000 SE Series Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX300 S7 Manual de usuario

Fujitsu

Fujitsu SPARC Enterprise M8000 Guía de instalación

Fujitsu

Fujitsu Primergy RX200 S4 Manual de usuario

Fujitsu

Fujitsu Primergy RX300 S2 Guía

Fujitsu

Fujitsu PRIMERGY TX150 S6 Manual de usuario

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario