Fujitsu PRIMERGY SX980 S1 Manual del propietario
Service Supplement - English
PRIMERGY SX980 S1 / SX980 S2
Storage Blade
Service Supplement
Edition October 2012
Copyright and Trademarks
Comments…Suggestions…Corrections…
The User Documentation Department would like to
know your opinion of this manual. Your feedback helps
us optimize our documentation to suit your individual
needs.
Feel free to send us your comments by e-mail to
[email protected]su.com.
Certified documentation
according to DIN EN ISO 9001:2008
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system
which complies with the requirements of the standard
DIN EN ISO 9001:2008.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright © 2012 Fujitsu Technology Solutions GmbH.
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.
– The contents of this manual may be revised without prior notice.
– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from
the use of any information in this manual.
– No part of this manual may be reproduced in any form without the prior written permission
of Fujitsu.
Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of
Microsoft Corporation in the USA and other countries.
Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries
in the USA and other countries.
SX980 S1 / SX980 S2 Service Supplement
Before reading this manual
For your safety
This manual contains important information for safely and correctly using this
product.
Carefully read the manual before using this product. Pay particular attention to
the accompanying manual "Safety Notes and Regulations" and ensure these
safety notes are understood before using the product. Keep this manual and the
manual "Safety Notes and Regulations" in a safe place for easy reference while
using this product.
Radio interference
This product is a "Class A" ITE (Information Technology Equipment). In a
domestic environment this product may cause radio interference, in which case
the user may be required to take appropriate measures. VCCI-A
Aluminum electrolytic capacitors
The aluminum electrolytic capacitors used in the product's printed circuit board
assemblies and in the mouse and keyboard are limited-life components. Use of
these components beyond their operating life may result in electrolyte leakage
or depletion, potentially causing emission of foul odor or smoke.
As a guideline, in a normal office environment (25°C) operating life is not
expected to be reached within the maintenance support period (5 years).
However, operating life may be reached more quickly if, for example, the
product is used in a hot environment. The customer shall bear the cost of
replacing replaceable components which have exceeded their operating life.
Note that these are only guidelines, and do not constitute a guarantee of
trouble-free operation during the maintenance support period.
High safety use
This product has been designed and manufactured to be used in commercial
and/or industrial areas as a server.
When used as visual display workplace, it must not be placed in the direct field
of view to avoid incommoding reflections (applies only to TX server systems).
The device has not been designed or manufactured for uses which demand an
extremely high level of safety and carry a direct and serious risk of life or body
if such safety cannot be assured.
Service Supplement SX980 S1 / SX980 S2
These uses include control of nuclear reactions in nuclear power plants,
automatic airplane flight control, air traffic control, traffic control in mass
transport systems, medical devices for life support, and missile guidance
control in weapons systems (hereafter, "high safety use"). Customers should
not use this product for high safety use unless measures are in place for
ensuring the level of safety demanded of such use. Please consult the sales
staff of Fujitsu if intending to use this product for high safety use.
Measures against momentary voltage drop
This product may be affected by a momentary voltage drop in the power supply
caused by lightning. To prevent a momentary voltage drop, use of an AC
uninterruptible power supply is recommended.
(This notice follows the guidelines of Voltage Dip Immunity of Personal
Computer issued by JEITA, the Japan Electronics and Information Technology
Industries Association.)
Technology controlled by the Foreign Exchange and Foreign Trade
Control Law of Japan
Documents produced by Fujitsu may contain technology controlled by the
Foreign Exchange and Foreign Trade Control Law of Japan. Documents which
contain such technology should not be exported from Japan or transferred to
non-residents of Japan without first obtaining authorization in accordance with
the above law.
Harmonic Current Standards
This product conforms to harmonic current standard JIS C 61000-3-2.
Only for the Japanese market:
About SATA hard disk drives
The SATA version of this server supports hard disk drives with SATA / BC-SATA
storage interfaces. Please note that the usage and operation conditions differ
depending on the type of hard disk drive used.
Please refer to the following internet address for further information on the
usage and operation conditions of each available type of hard disk drive:
http://primeserver.fujitsu.com/primergy/harddisk/
SX980 S1 / SX980 S2 Service Supplement
Only for the Japanese market:
IAlthough described in this manual, some sections do not apply to the
Japanese market. These options and routines include:
– CSS (Customer Self Service)
Service Supplement SX980 S1 / SX980 S2
SX980 S1 / SX980 S2 Service Supplement
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.1 Concept and target groups . . . . . . . . . . . . . . . . . . . 9
1.2 Documentation overview . . . . . . . . . . . . . . . . . . . . 9
1.3 Notational conventions . . . . . . . . . . . . . . . . . . . . 11
2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3 Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4 Replacement routines . . . . . . . . . . . . . . . . . . . . . 17
4.1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.1.1 Removing the storage blade from the system unit . . . . . . . 17
4.2 Replacing the complete storage blade . . . . . . . . . . . . 18
5 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5.1 PRIMERGY SX980 S1 . . . . . . . . . . . . . . . . . . . . . 19
5.1.1 SX980 S1 storage blade as spare part . . . . . . . . . . . . . 19
5.1.2 SX980 S1 storage blade cable plan . . . . . . . . . . . . . . . 20
5.2 PRIMERGY SX980 S2 . . . . . . . . . . . . . . . . . . . . . 21
5.2.1 SX980 S2 storage blade as spare part . . . . . . . . . . . . . 21
5.2.2 SX980 S2 storage blade cable plan . . . . . . . . . . . . . . . 22
5.3 Installing drive modules . . . . . . . . . . . . . . . . . . . . 23
Service Supplement SX980 S1 / SX980 S2
Contents
SX980 S1 / SX980 S2 Service Supplement 9
1 Introduction
The PRIMERGY SX980 S1 / SX980 S2 storage blade is used as a storage
subsystem for the PRIMERGY BX400 S1 and BX900 S1 / BX900 S2 system
unit.
The storage blade comes with 10 bays for 2.5-inch SAS HDD/SSD modules and
occupies two bays in the system unit. Up to three SX980 S1 / SX980 S2 storage
blades can be installed per BX400 S1 system unit. Up to six SX980 S1 /
SX980 S2 storage blades can be installed per BX900 S1 / BX900 S2 system
unit.
1.1 Concept and target groups
This Service Supplement completes the information given in the Operating
Manual.
The activities described in this manual may only be performed by service
personnel.
1.2 Documentation overview
Service DVD PRIMERGY
Service partners of Fujitsu Technology Solutions can order a PRIMERGY
Service DVD. On the DVD the following manuals are available in pdf format:
– "Safety Notes and Regulations" manual
– "PRIMERGY SX980 S1 / SX980 S2 Storage Blade Operating Manual"
– "PRIMERGY SX980 S1 / SX980 S2 Storage Blade Service Supplement"
10 Service Supplement SX980 S1 / SX980 S2
Introduction
Information/procedure Manual
Detailed safety notes Safety notes and
regulations
Features and technical data of the storage blade Operating Manual
Installation and operation, among other things:
– Installation in the system units
– Starting up
– Operation
Installation/removal of components:
– Hot-plug hard disk drives and solid state drives
Replacement routines:
– SX980 S1 / SX980 S2 storage blade complete
(with cables)
Service Supplement
Board layouts and cable plan
Table 1: Overview of the documentation for PRIMERGY SX980 S1 / SX980 S2 storage blade
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Servidor de Fujitsu
Fujitsu
Fujitsu PRIMERGY TX150 S4 Manual de usuario
Fujitsu
Fujitsu SPARC Enterprise M4000 Manual de usuario
Fujitsu
Fujitsu PRIMERGY S60 Manual de usuario
Fujitsu
Fujitsu FUTRO S720 Manual de usuario
Fujitsu
Fujitsu primergy TX150 Manual de usuario
Fujitsu
Fujitsu Primergy BX920 S3 Manual de usuario
Fujitsu
Fujitsu PRIMEQUEST 2000 Series Manual de servicio
Fujitsu
Fujitsu M10 Series Manual técnico
Fujitsu
Fujitsu SPARC Enterprise T2000 Manual de usuario
Fujitsu
Fujitsu PRIMERGY TX100 S1 Manual de usuario
Fujitsu
Fujitsu SPARC M10-4 Manual de usuario
Fujitsu
Fujitsu PRIMERGY TX100 S1 Manual de usuario
Fujitsu
Fujitsu PRIMERGY TX2550 M4 Manual de usuario
Fujitsu
Fujitsu SPARC Enterprise M4000 Manual
Fujitsu
Fujitsu PRIMERGY RX900 S2 Manual de usuario
Fujitsu
Fujitsu PRIMERGY CX2550 M6 Manual de usuario
Fujitsu
Fujitsu 1FINITY L100 Manual de usuario
Fujitsu
Fujitsu SPARC Enterprise M4000 Hoja de especificaciones
Fujitsu
Fujitsu Primergy RX300 S2 Manual de usuario
Fujitsu
Fujitsu PRIMERGY RX300 S5 Manual de usuario
