Fujitsu PRIMERGY RX200 S6 Manual de usuario

Operating Manual - English

PRIMERGY RX200 S6

Operating Manual

April 2010

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected]ujitsu.com.

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

– No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

RX200 S6 Operating Manual

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety notes and other important information" and

ensure these safety notes are understood before using the product. Keep this

manual and the manual "Safety notes and other important information" in a safe

place for easy reference while using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the product

is used in a hot environment. The customer shall bear the cost of replacing

replaceable components which have exceeded their operating life. Note that

these are only guidelines, and do not constitute a guarantee of trouble-free

operation during the maintenance support period.

High safety use

This product has been designed and manufactured for general uses such as

general office use, personal use, domestic use and normal industrial use. It has

not been designed or manufactured for uses which demand an extremely high

level of safety and carry a direct and serious risk to life or body if such safety

cannot be ensured.

Operating Manual RX200 S6

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance control

in weapons systems (hereafter, "high safety use"). Customers should not use

this product for high safety use unless measures are in place for ensuring the

level of safety demanded of such use. Please consult the sales staff of Fujitsu if

intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for the Japanese market:

About SATA hard disk drives

The SATA version of this server supports hard disk drives with SATA / BC-SATA

storage interfaces. Please note that the usage and operation conditions differ

depending on the type of hard disk drive used.

Please refer to the following internet address for further information on the

usage and operation conditions of each available type of hard disk drive:

http://primeserver.fujitsu.com/primergy/harddisk/

RX200 S6 Operating Manual

Only for the Japanese market:

IAlthough described in this manual, some sections do not apply to the

Japanese market. These options and routines include:

– USB Flash Module (UFM)

– CSS (Customer Self Service)

– Replacing the lithium battery

Operating Manual RX200 S6

RX200 S6 Operating Manual

Contents

1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1.1 Concept and target groups for this manual . . . . . . . . . 11

1.2 Documentation overview . . . . . . . . . . . . . . . . . . . 12

1.3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

1.4 Notational conventions . . . . . . . . . . . . . . . . . . . . 22

1.5 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . 23

2 Installation steps, overview . . . . . . . . . . . . . . . . . . 27

3 Important information . . . . . . . . . . . . . . . . . . . . . 29

3.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 29

3.2 ENERGY STAR . . . . . . . . . . . . . . . . . . . . . . . . . 37

3.3 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 38

3.4 Transporting the server . . . . . . . . . . . . . . . . . . . . 38

3.5 Notes on installing the server in the rack . . . . . . . . . . 39

3.6 Environmental protection . . . . . . . . . . . . . . . . . . . 40

4 Hardware installation . . . . . . . . . . . . . . . . . . . . . . 43

4.1 Unpacking the server . . . . . . . . . . . . . . . . . . . . . 44

4.2 Installing/removing the server in/from the rack . . . . . . . 45

4.2.1 Rack system requirements . . . . . . . . . . . . . . . . . . . 45

4.2.2 Installation in PRIMECENTER/DataCenter Rack . . . . . . . . 48

4.2.3 Installation in 3rd party racks . . . . . . . . . . . . . . . . . . 54

4.3 Connecting devices to the server . . . . . . . . . . . . . . . 56

4.4 Connecting the server to the mains . . . . . . . . . . . . . . 58

4.4.1 Using the cable clamp . . . . . . . . . . . . . . . . . . . . . . 59

4.5 Notes on connecting/disconnecting cables . . . . . . . . . 60

Operating Manual RX200 S6

Contents

5 Starting up and operation . . . . . . . . . . . . . . . . . . . . 61

5.1 Controls and indicators . . . . . . . . . . . . . . . . . . . . . 61

5.1.1 Front of server . . . . . . . . . . . . . . . . . . . . . . . . . . 61

5.1.2 Rear of server . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

5.1.3 Indicators of the hot-plug system fans . . . . . . . . . . . . . . 70

5.2 Switching the server on and off . . . . . . . . . . . . . . . . 71

5.3 Configuring the server . . . . . . . . . . . . . . . . . . . . . 74

5.3.1 Configuring the onboard SATA controller . . . . . . . . . . . . . 74

5.3.2 Configuring the SAS/SATA RAID controller . . . . . . . . . . . . 74

5.3.3 Configuring the server and installing the operating system with the

ServerView Installation Manager . . . . . . . . . . . . . . . . . 75

5.3.4 Configuring the server and installing the operating system without

ServerView Installation Manager . . . . . . . . . . . . . . . . . 76

5.4 Cleaning the server . . . . . . . . . . . . . . . . . . . . . . . 77

6 Property and data protection . . . . . . . . . . . . . . . . . . 79

6.1 BIOS Setup security functions . . . . . . . . . . . . . . . . . 79

7 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . 81

7.1 Power-on indicator remains unlit . . . . . . . . . . . . . . . . 81

7.2 Server switches itself off . . . . . . . . . . . . . . . . . . . . 82

7.3 Screen remains blank . . . . . . . . . . . . . . . . . . . . . . 82

7.4 Flickering stripes on monitor screen . . . . . . . . . . . . . 83

7.5 No screen display or display drifts . . . . . . . . . . . . . . . 83

7.6 Incorrect date and time . . . . . . . . . . . . . . . . . . . . . 84

7.7 System will not boot . . . . . . . . . . . . . . . . . . . . . . . 84

7.8 Drives reported as “dead” when starting system . . . . . . . 84

7.9 Added drive reported as defective . . . . . . . . . . . . . . . 85

7.10 Error message on screen . . . . . . . . . . . . . . . . . . . . 85

8 CSS components . . . . . . . . . . . . . . . . . . . . . . . . 87

RX200 S6 Operating Manual

Contents

8.1 Hot-plug components . . . . . . . . . . . . . . . . . . . . . 88

8.1.1 Hot-plug power supply units . . . . . . . . . . . . . . . . . . . 88

8.1.1.1 Remove the dummy module . . . . . . . . . . . . . . . . . 90

8.1.1.2 Installing the hot-plug power supply unit . . . . . . . . . . . 90

8.1.1.3 Replacing the hot-plug power supply unit . . . . . . . . . . 91

8.1.2 Hot-plug hard disk drives . . . . . . . . . . . . . . . . . . . . 92

8.1.2.1 HDD module and dummy module . . . . . . . . . . . . . . 94

8.1.2.2 Handling hard disk drives and HDD modules . . . . . . . . 95

8.1.2.3 Removing/installing the dummy module . . . . . . . . . . . 96

8.1.2.4 Installing the HDD module . . . . . . . . . . . . . . . . . . 97

8.1.2.5 Removing the HDD module . . . . . . . . . . . . . . . . . 98

8.1.3 Replacing a hot-plug fan . . . . . . . . . . . . . . . . . . . . . 100

8.1.3.1 Opening/closing the fan cover . . . . . . . . . . . . . . . . 101

8.1.3.2 Exchanging the fan . . . . . . . . . . . . . . . . . . . . . . 102

8.2 Replacement of non-hot-plug components . . . . . . . . . 104

8.2.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 104

8.2.2 Replacing a memory module . . . . . . . . . . . . . . . . . . 106

8.2.2.1 Removing the air cowl . . . . . . . . . . . . . . . . . . . . 106

8.2.2.2 Identifying a defective CSS component . . . . . . . . . . . 107

8.2.2.3 Removing a defective memory module . . . . . . . . . . . 108

8.2.2.4 Installing a new memory module . . . . . . . . . . . . . . . 108

8.2.2.5 Fitting the air cowl . . . . . . . . . . . . . . . . . . . . . . 109

8.2.3 Replacing an expansion card . . . . . . . . . . . . . . . . . . 110

8.2.4 Closing the server . . . . . . . . . . . . . . . . . . . . . . . . 114

9 Appendix: server specification . . . . . . . . . . . . . . . . 115

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

Operating Manual RX200 S6

Contents

Otros manuales para PRIMERGY RX200 S6

Tabla de contenidos

Otros manuales de Servidor de Fujitsu

Fujitsu

Fujitsu PRIMERGY BX620 S6 Manual de usuario

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX300 S5 Manual de usuario

Fujitsu

Fujitsu PRIMEQUEST 2800B3 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX300 S5 Manual del propietario

Fujitsu

Fujitsu 1FINITY L100 Manual de usuario

Fujitsu

Fujitsu SPARC ENTERPRISE T1000 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX1320 M3 Manual de usuario

Fujitsu

Fujitsu SPARC Enterprise M9000 Manual de usuario

Fujitsu

Fujitsu PRIMERGY BX600 Manual de usuario

Fujitsu

Fujitsu Primergy RX100 S5 Guía

Fujitsu

Fujitsu PRIMERGY GX2460 M1 Manual de usuario

Fujitsu

Fujitsu PRIMEQUEST 3000 Series Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX2540 M1 Manual de usuario

Fujitsu

Fujitsu PRIMERGY BX600 S2 Manual de usuario

Fujitsu

Fujitsu primergy h250 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX300 S7 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX600 S3 Guía

Fujitsu

Fujitsu Server PRIMERGY TX1330 M1 Manual de usuario

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Manual de usuario

Fujitsu

Fujitsu FUTRO S550 Manual de usuario

Fujitsu

Fujitsu Primergy TX300 S4 Guía

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Manual de usuario

Fujitsu

Fujitsu Primergy TX120 Manual de usuario

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario