Fujitsu Fi-65F Manual de usuario

Getting Started

fi-65F Image Scanner

Thank you for purchasing our image scanner.

This manual describes the preparation required to use this product. Follow the procedures in this manual.

Make sure to read the attached "Safety Precautions" manual before using the scanner. For details about

scanner functions and features, basic operation, daily care and troubleshooting, refer to the Operator's

Guide (PDF). The Operator's Guide can be displayed by selecting [Browse manual] [Operator's Guide

(PDF)] in the Setup DVD-ROM.

Microsoft product screenshots in this manual are reprinted with permission from Microsoft Corporation.

ISIS is a trademark of Open Text.

Intel, Pentium, and Intel Core are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other

countries.

PaperStream is a registered trademark of PFU Limited in Japan.

Other company names and product names are the registered trademarks or trademarks of the respective

companies.

March 2022

Checking the Components

Make sure that all items shown below are included in the package. If any other packaging is provided, make

sure to keep it as well. The components must be handled with care.

The box and packaging materials are required for storage and transportation of the scanner. Do not throw

them away. If anything is missing or damaged, contact your FUJITSU scanner dealer or an authorized

FUJITSU scanner service provider.

Scanner (×1)

USB bus power cable (×1)

AC cable (×1)

Setup DVD-ROM (×1)

Safety Precautions (×1)

AC adapter (×1) USB cable (×1)

P3PC-4542-06EN

Safety Information

The attached Safety Precautions manual contains

important information about the safe and correct

use of this product. Make sure that you read and

understand it before using the scanner.

Symbols Used in This

Manual

The following symbols are used in this manual.

Removing the Protective

Packaging

The scanner is secured with orange protective

tape. Peel off the tape before using the scanner.

Installing the Software

The following software are bundled with the

scanner:

PaperStream IP (TWAIN)

Conforms to the TWAIN standard. Used when

you operate the scanner using TWAIN-

compliant 32-bit applications.

PaperStream IP (TWAIN x64)

Conforms to the TWAIN standard. Used when

you operate the scanner using TWAIN-

compliant 64-bit applications.

Can be installed on 64-bit operating systems.

PaperStream IP (ISIS) for fi-60F/fi-65F

Conforms to the ISIS standard. Used when you

operate the scanner using ISIS-compliant

applications.

Software Operation Panel

View the scanner information and configure

various settings such as the operation of the

scanner. Installed together with PaperStream

IP (TWAIN), PaperStream IP (TWAIN x64), or

PaperStream IP (ISIS) for fi-60F/fi-65F.

PaperStream ClickScan

A 32-bit image scanning application which

supports PaperStream IP (TWAIN).

Scanning can be performed via simple settings

and operations.

This program starts automatically when you log

in to your computer and resides in the

notification area located at the far right of the

task bar.

For details, refer to the PaperStream

ClickScan Help.

PaperStream Capture

A 32-bit image scanning application which

supports both PaperStream IP (TWAIN) and

PaperStream IP (ISIS) for fi-60F/fi-65F. By

defining scan settings as document profiles,

you can customize the settings according to

your preference.

PaperStream Capture Pro

(EVALUATION)

A 32-bit image scanning application which

supports PaperStream IP (TWAIN).

It is the trial version of PaperStream Capture

Pro.

To use the full version, purchase and activate a

license.

In addition to the functions in PaperStream

Capture, PaperStream Capture Pro also allows

you to perform multistation operations and

advanced meta data settings.

For details, refer to the PaperStream Capture

User's Guide.

Manual

Includes Safety Precautions, Getting Started,

and Operator's Guide.

Scanner Central Admin Agent

Used to centralize the management of multiple

scanners, by allowing you to apply firmware

updates simultaneously, monitor the operating

status, and check the scanner information.

Note that required applications will differ

depending on the form of operation.

For details, refer to the Scanner Central Admin

User’s Guide.

Symbol Description

WARNING

This indication alerts operators of

an operation that, if not strictly

observed, may result in severe

injury or death.

CAUTION

This indication alerts operators of

an operation that, if not strictly

observed, may result in safety

hazards to personnel or damage

to the product.

Bundled Software

fi Series Online Update

An application that checks for the software

updates for fi Series, and runs the updates.

The system requirements are as follows.

*1: The software operates as a desktop

application.

*2: Required disk space varies according to the

file size of the scanned images.

Install the bundled software from the Setup DVD-

ROM in the following procedure.

Note that there are two ways to install the bundled

software: select [Installation (Recommended)] to

install all the software required to operate the

scanner, or [Installation (Custom)] to select and

install one software at a time.

■Installation (Recommended)

The following software are installed:

PaperStream IP (TWAIN)

Software Operation Panel

PaperStream ClickScan

PaperStream Capture

Manual

fi Series Online Update

1. Turn on the computer and log onto

Windows®as a user with Administrator

privileges.

System Requirements

Operating

system



Windows Server

2008 R2 Standard

(64-bit)



Windows

7 Professional

(32-bit/64-bit)



Windows

7 Enterprise (32-bit/64-bit)



Windows Server

2012 Standard

(64-bit) (*1)

Windows Server

2012 R2 Standard

(64-bit) (*1)

Windows®8.1 (32-bit/64-bit) (*1)

Windows®8.1 Pro (32-bit/64-bit) (*1)

Windows®8.1 Enterprise

(32-bit/64-bit) (*1)

Windows®10 Home

(32-bit/64-bit) (*1)

Windows®10 Pro (32-bit/64-bit) (*1)

Windows®10 Enterprise

(32-bit/64-bit) (*1)

Windows®10 Education

(32-bit/64-bit) (*1)

Windows Server®2016 Standard

(64-bit) (*1)

Windows Server®2019 Standard

(64-bit) (*1)

Windows Server®2022 Standard

(64-bit) (*1)

Windows®11 Home (64-bit) (*1)

Windows®11 Pro (64-bit) (*1)

Windows®11 Enterprise (64-bit) (*1)

Windows®11 Education (64-bit) (*1)

CPU

Intel

Pentium

4 1.8 GHz or higher

(Recommended:

Intel

Core™ i5 2.5 GHz or higher,

excluding mobile processors)

Memory

1 GB or more

(Recommended: 4 GB or more)

Hard disk

drive

5,400 rpm or more

(Recommended: 7,200 rpm or more)

Display

resolution

1,024 × 768 pixels or more,

65,536 colors or more

Hard disk

space

11 GB or more of free hard disk space

(*2)

DVD

drive

Required for installing the software

Interface USB 2.0/1.1

ATTENTION

If the system requirements above are not

satisfied, the scanner may not operate.

Scanning speed will slow down in the following

cases:

- The CPU or the memory does not meet the

required specifications

- The version of the USB port or the USB hub

is USB 1.1

HINT

The screenshots used in this manual are of

Windows®7. The actual windows and

operations may differ depending on the

operating system.

Where there is no distinction between the

different versions of the operating system

shown in the table of system requirements, the

general term Windows®is used.

Installing the Bundled Software

ATTENTION

If an old version of the software is installed

already, uninstall it first.

For details about the uninstallation procedures,

refer to "A.4 Uninstalling the Software" in the

Operator's Guide.

2. Insert the Setup DVD-ROM into the DVD

drive.

The [fi Series Setup] screen appears.

3. Click the scanner model name to be used

(if the window for selecting a model name

is displayed).

4. Click the [Installation (Recommended)]

button.

5. Follow the instructions on the screen to

proceed with the installation.

■Installation (Custom)

1. Perform steps 1. to 3. in "Installation

(Recommended) (page 3)".

2. Click the [Installation (Custom)] button.

3. Select the check box for the software to

install and click the [Next] button.

4. Follow the instructions on the screen to

proceed with the installation.

Installing the Scanner

Install the scanner in the following procedure.

1. Place the scanner at its installation site.

2. Unlock the transport lock switch.

There is a carrier unit inside the flatbed which

is fixed in place to prevent damage during

transportation.

Slide the transport lock switch on the back.

HINT

If the [fi Series Setup] screen does not

appear, double-click "Setup.exe" in the

Setup DVD-ROM via Windows Explorer or

[Computer].

ATTENTION

Carry the scanner by supporting it from the

bottom.

145 (5.71)

257

281

234

(10.12)

40 (1.57)

(11.06)

(9.21)

145 (5.71)

Outer dimensions

Installation space

Unit: mm (in.)

Locked Unlocked

Transport lock switch

Connecting the Cables

Connect each cable in the following procedure.

1. Confirm that the computer is turned off.

2. Connect the USB cable to the USB

connector of the scanner and USB port of

the computer.

3. Connect the power cable or USB bus

power cable.

For the power cable connection

The AC cable and AC adapter connected to

each other are collectively called the "power

cable".

Connect the power cable to the power

connector of the scanner, and plug the other

end into an AC outlet.

For the USB bus power cable

Connect the USB bus power cable to the

power connector of the scanner and to the

USB port of the computer.

Test-Scan

Follow the procedure described below to check

that documents can be scanned correctly by using

PaperStream Capture and PaperStream IP

(TWAIN).

1. Turn on the computer.

The scanner is turned on, and the power

LED lights in green.

CAUTION

Only use the supplied AC adapter. Not doing

so may cause the scanner to malfunction.

Furthermore, do not use the supplied AC

adaptor for other products.

ATTENTION

Use the supplied USB cable.

When you use a USB hub, a USB 2.0

certified hub is recommended. If the

scanner that is connected to the USB hub

does not operate properly, connect the

USB cable to the USB port of the

computer directly.

If you connect the scanner with USB 2.0,

it is required that the USB port be

compliant with USB 2.0. The scanning

speed slows down when you connect the

scanner with USB 1.1.

Connect it with

the USB mark

facing up.

USB connector

AC cable

USB cable

Power connector

AC adapter

USB bus power cable

USB mark

WARNING

Only use the power cable or USB bus

power cable that is supplied with the

scanner.

Doing the following may cause an electric

shock or the scanner to malfunction:

Using a power cable or USB bus power

cable that is not supplied with the

scanner.

Using the supplied power cable or USB

bus power cable with other products.

ATTENTION

If the power LED does not light in green,

refer to "Chapter 6 Troubleshooting" in the

Operator's Guide.

Power LED

The scanner is automatically recognized

by the computer.

2. Place a document on the scanner.

1. Open the document cover.

2. Place the document on the document bed.

Place the document face-down to align its

top left-hand corner with the reference point.

3. Gently close the document cover.

3. Start up PaperStream Capture.

Windows Server®2008 R2/Windows®7

Select the [Start] menu [All Programs] 

[PaperStream Capture] [PaperStream

Capture].

Windows Server®2012

Right-click the Start screen, select [All apps]

on the app bar, and then select

[PaperStream Capture] under [PaperStream

Capture].

Windows Server®2012 R2/Windows®8.1

Click [] on the lower left side of the Start

screen, and then select [PaperStream

Capture] under [PaperStream Capture].

To display [], move the mouse cursor.

Windows®10/Windows Server®2016/

Windows Server®2019/Windows Server®

2022

Select the [Start] menu [PaperStream

Capture] [PaperStream Capture].

Windows®11

Select the [Start] menu [All apps] 

[PaperStream Capture] [PaperStream

Capture].

4. Click [Scan] in the menu area.

5. Click one of the three types of document

profiles that are prepared beforehand.

Below is an example of when the document

profile [Black and White] is clicked.

The document is scanned, and the

scanned image is displayed.

HINT

When the [Found New Hardware] dialog

box appears, click [Locate and install driver

software (recommended)] and then follow

the instructions on the screen to proceed

with the installation.

Document cover

ABC

Reference point

Document bed

ABC

Document

cover

For details about other scanning features, refer to

"Chapter 4 Various Ways to Scan" in the

Operator's Guide.

Contact for Inquiries

Refer to the contact list on the following web page:

https://imagescanner.fujitsu.com/r/ctl/

Image Scanner fi Series

For other inquiries regarding the scanner,

refer to the following web page:

https://www.fujitsu.com/global/support/

products/computing/peripheral/scanners/fi/

If the solution to your problem cannot be

found on the above web page, refer to the

contact information for your Fujitsu office on

the following web page:

https://www.fujitsu.com/global/about/

resources/shop/computing/peripheral/

scanners/index.html

https://imagescanner.fujitsu.com/r/ctl/

Notice

Copying of the contents of this document in whole

or in part and copying of the scanner application is

prohibited under the copyright law.

The contents of this document are subject to

change without notice.

ATTENTION

If a problem occurs, refer to "Chapter 6

Troubleshooting" in the Operator's Guide.

Contact for Purchasing Consumables

or Cleaning Materials

Otros manuales para fi-65F

Tabla de contenidos

Otros manuales de Escáner de Fujitsu

Fujitsu

Fujitsu N7100 Guía de configuración

Fujitsu

Fujitsu FI-6750S Manual

Fujitsu

Fujitsu FI-6000NS Manual de usuario

Fujitsu

Fujitsu S510M - ScanSnap - Document Scanner Manual de usuario

Fujitsu

Fujitsu FI-5015C Manual

Fujitsu

Fujitsu M4097D - Fb 50PPM SCSI A3 Dupl 100Sht Adf Guía de referencia

Fujitsu

Fujitsu ScanSnap iX500 Manual de usuario

Fujitsu

Fujitsu Fi-4750c - Color Duplex Document Scanner 50ppm 90ipm... Manual

Fujitsu

Fujitsu ScanSnap Organizer Manual de usuario

Fujitsu

Fujitsu fi-4860C Manual de usuario

Fujitsu

Fujitsu FI-5530C2 Guía de configuración

Fujitsu

Fujitsu S510M - ScanSnap - Document Scanner Guía de configuración

Fujitsu

Fujitsu fi-7300NX Manual de usuario

Fujitsu

Fujitsu FI-5015C Manual de usuario

Fujitsu

Fujitsu M4097D - Fb 50PPM SCSI A3 Dupl 100Sht Adf Manual de usuario

Fujitsu

Fujitsu FI-400F Manual

Fujitsu

Fujitsu FI-4120C2 - Document Scanner Manual de usuario

Fujitsu

Fujitsu S510 - ScanSnap - Document Scanner Manual de usuario

Fujitsu

Fujitsu ScanSnap fi-5110EOX Manual

Fujitsu

Fujitsu fi-565PR Manual

Fujitsu

Fujitsu ScanSnap fi-5110EOXM Guía de referencia

Fujitsu

Fujitsu ScanPartner Jr. C Manual del propietario

Fujitsu

Fujitsu fi-5110 SERIES S500 Guía de configuración

Fujitsu

Fujitsu fi-6400 Manual de instrucciones

Manuales populares de Escáner de otras marcas

Plustek

Plustek Scanner Manual de usuario

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manual de usuario

Renkforce

Renkforce DS100-5M Manual de usuario

Image Access

Image Access WideTEK A2 Manual de usuario

Canon

Canon imageFORMULA CR-120N Manual de usuario

GeoSlam

GeoSlam ZEB Horizon Instrucciones de instalación

Kodak

Kodak i5800 Scanner Manual de usuario

Kodak

Kodak i7300 Manual de usuario

Revopoint

Revopoint POP Manual de usuario

Eddyfi Technologies

Eddyfi Technologies Floormap X Manual de usuario

Faselase

Faselase F6 Manual de usuario

Uniden

Uniden BC340CRS Manual de usuario

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manual de usuario

Mustek

Mustek PageExpress 4800 Pro Manual de usuario

Optex

Optex 750830 Manual de usuario

Innova

Innova 5210 Manual de usuario

Visioneer

Visioneer CardReader 100 Guía de inicio rápido

Rohde & Schwarz

Rohde & Schwarz TSME6 Manual de usuario

Fujitsu fi-65F Manual de usuario

Manuales populares de Escáner de otras marcas