Fujitsu FTP-628WSL210 Series Manual de usuario

Mobile Printer

FTP-628WSL210 Series

User's Guide

FUJITSU COMPONENT LIMITED

Thank you for purchasing the FTP-628WSL210 Series Mobile Printer

(hereafter referred to as “this product”).

This User's Guide (hereafter referred to as “this guide”) contains

precautions to use it safely and correctly.

Before using this product, please be sure to read complete this guide

to use it correctly.

In addition, please keep this guide handy for future reference.

If you have any suggestions or comments on this guide, please do

not hesitate to let us know.

Bluetooth® is registered trademark of Bluetooth SIG..

Apple is registered trademark of Apple Inc., registered in the U.S. and

other countries.

iPhone and iPad are registered trademarks of Apple Inc.

Android is trademarks of Google Inc.

All other product names and servis names are trademarks or registered

trademarks of their respective companies.

FUJITSU COMPONENT LIMITED 2012

■ Change of contents

The contents of this guide and this product are subject to change without

notice for the improvement.

■ Use to high safety application

This product was designed and manufactured assuming general purpose

use, such as standard industrial, general, personal and home use. This

product was not designed and manufactured for a “high safety

application”, that is, an application which demands extremely high safety

and which may have a serious influence on society and expose

individuals to serious danger if high safety is not assured (nuclear

reaction control in a nuclear facility, aircraft automatic flight control, air

traffic control, transport control in a mass transport system, medical

equipment for life support, missile launch control of a weapons system),

or an application which requires extremely high reliability (submarine

relay, space satellite), Therefore do not use this product for a high safety

application. If you are not certain whether this device is in a high safety

application category, contact Fujitsu Component Ltd. sales personnel

prior to use.

We shall take no responsibility for any damage caused by the use of this

product in a high safety application.

■ Copyright

This product and this guide are copyrighted works of

FUJITSU COMPONENT LIMITED.

This product and this manual must not be reproduced, duplicated, used,

or modified, partially or in full, without permission.

■ Regulatory Compliance

For Customers in USA (FCC)

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

1) This device may not cause harmful interference, and

2) This device must accept any interference received,

including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one of

the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, any changes or modifications not

expressly approved by the party responsible for compliance could void

the userʼs authority to operate this equipment. (Example- use only

shielded interface cables when connecting to computer or peripheral

devices).

For Customers in CANADA (Industry Canada)

This equipment complies with Industry Canada RSS210 rules.

Operation is subject to the following two conditions:

1) This device may not cause harmful interference, and

2) this device must accept any interference received,

including interference that may cause undesired operation.

For Customers in EU (CE Marking)

This product is in conformance with the requirements of European

Council Directive:

R&TTE Directive 1995/5/EC

Applied standards:

EN 60950-1

EN 300 328

EN 301 489-1

EN 301 489-17

■ Export

This device may contain commodities, technology or software subject to

export laws and regulations from the US and other countries. Diversion

contrary to the country law is prohibited.

■ Warranty

We shall take no responsibility for any failure caused with wrong

operation or wrong environment.

Moreover, we cannot take responsibility of the loss, of the passive

damages or of the claim of the third party, even if it is caused by using or

breakdown of this product.

In addition, the range of the guarantee of the failure of this product will

never exceed the amount of money paid as a price of this product in any

case.

■ Meaning of Symbols

The following symbols are used in this guide. Please understand

well the meaning of each symbol and read this guide.

Warning Indicates possibility of causing severe

personal injury or death if not used properly.

Caution

Indicates that a minor or some personal injury

may occur or that the product itself or other userʼs

property may be damaged.

Indicates danger, warning and caution.

A concrete content is described on the side of this

symbol.

Indicates an action that must not be performed.

A concrete content is described on the side of this

symbol.

Indicates an action that must be performed.

A concrete content is described on the side of this

symbol.

Important Indicates important points by using this product.

■ Ge n e r i c P r e c a u t i o n s

Warning

Fire

- Do not burn or heat.

Failure to observe this may cause smoke or fire or

breakdown.

Fire

- Do not pour water.

This equipment is not waterproof. Failure to observe this

may cause fire or burst or breakdown.

Fire

- Do not use or store the equipment in a hot

environment.

Failure to observe this may cause smoke or fire or

breakdown.

Fire

- Do not throw or drop.

Failure to observe this may cause fire or burst or breakdown.

Fire

- Do not use with wet hand. Do not drip or drop liquid

such as drinking waters, clips or other foreign matter.

Failure to observe this may cause fire or electric shock.

Break-

down

- In the event of the occurrence of heat or unusual smells

or smoke or excessive noise during use, please stop

using it immediately. Unplug the power cable, remove

the battery and please contact your sales

representative or maintenance engineer.

Break-

down

- Do not use in locations of corrosive gas or salt wind.

Failure to observe this may cause failure.

Modify

- Do not modify or disassemble.

Failure to observe this may cause fire or burst or breakdown.

Caution

Fire

- Do not use direct sun or dusty place that contains the oil

and iron.

Failure to observe this may cause heat, fire, or failure.

Fire

- If charging is not completed beyond the predetermined

charging time, unplug the charger, please stop the

charge.

The battery may leak by overcharging.

Fire

- Do not apply force to the cable.

Failure to observe this may cause fire or electric shock.

Injury

- Do not use while driving a vehicle or walking.

Failure to observe this may cause traffic accidents and

injuries caused by falls.

Break-

down

- Install the printer as far as possible from equipment

having large radiation noise, such as a high voltage

device and a large motor.

Failure to observe this may cause malfunction or breakdown.

Break-

down

- Separate the power line from other devices which

generate noise. (Large motor etc.)

Failure to observe this may cause malfunction or breakdown.

Failure

- Before using this product, be sure to read complete

user's guide to use it correctly.

It may cause the failure by wrong use.

■ Printer

Warning

Fire

- Do not put metal objects or flammable objects into the

gaps of the case.

Failure to observe this may cause fire, or electric shock.

Accident

- Do not use the printer in a location that is prohibited the

generation of radio waves.

Might be in an accident by the malfunction of the instrument.

Burn

- Surely turn off the printer power and check that the

printer head is sufficiently cooled down before cleaning.

Failure to observe this may cause burn injury.

Burn

- During or immediately after operation, do not touch the

print head and the support plate and the motor. Heat is

not immediately discharged after the stop.

Failure to observe this may cause burn injury.

Caution

Injury

- Be careful not to get a hand or hair caught in moving

part.

Failure to observe this may cause burn injury.

Injury

- Never insert fingers or metal into the paper insertion

and eject slots of the paper cutter.

Failure to observe this may cause equipment failure or injury.

Stop

- When printing continuously at a rate high printing,

head temperature warning may occur and printing may

stop.

Otros manuales para FTP-628WSL210 Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora de Fujitsu

Fujitsu

Fujitsu FTP-632MCL301 Manual de usuario

Fujitsu

Fujitsu DL900 Manual de usuario

Fujitsu

Fujitsu FP-1100 Manual de usuario

Fujitsu

Fujitsu PrintPartner 10V Manual de usuario

Fujitsu

Fujitsu FTP-629DCL014R Manual de usuario

Fujitsu

Fujitsu DL7400Pro Manual de usuario

Fujitsu

Fujitsu FTP628 MCL383 Manual de usuario

Fujitsu

Fujitsu FTP-627 Series Manual de usuario

Fujitsu

Fujitsu FP-1000 Manual de usuario

Fujitsu

Fujitsu DL4400 Manual de usuario

Fujitsu

Fujitsu DL3800 Pro Manual de usuario

Fujitsu

Fujitsu C145-C037-01EN Especificaciones técnicas

Fujitsu

Fujitsu DL6400PRO Manual de usuario

Fujitsu

Fujitsu ScanSnap iX100 Manual de instrucciones

Fujitsu

Fujitsu DL9300 Manual de usuario

Fujitsu

Fujitsu FTP-631MCL101 Manual de usuario

Fujitsu

Fujitsu DotMax 24 series Manual de usuario

Fujitsu

Fujitsu fi-4x20 SERIES Guía de configuración

Fujitsu

Fujitsu N7100E Manual de usuario

Fujitsu

Fujitsu FI-6670A Guía de configuración

Fujitsu

Fujitsu FTP-621DCL012 Manual de usuario

Fujitsu

Fujitsu FI-590PRF Operators Manual

Fujitsu

Fujitsu DL1200 Manual de usuario

Fujitsu

Fujitsu FTP-62HWSL001 SERIES Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario