Fujitsu FP-1000 Manual de usuario

FP-1000

Thermal Printer User’s Manual

Standard Model FP-1000

Built-in Power Supply Model FP-1000PW

Fujitsu Isotec Limited.

KA02066-Y900-04

All the company names and product names mentioned in this document are the

trademarks or registered trademarks of their respective companies.

This document is subject to change without notice.

Unauthorized reproduction or copying of this document, whether in part or in

whole is prohibited.

Please be aware that we cannot be held liable in any way for the effects of

operating this product in accordance with this document or damages caused due to

negligence.

Although we have made every effort to ensure accuracy in creating this document,

if you find any discrepancies such as unclear locations or wrong/missing

descriptions, please make inquiries with the sales company where you purchased

the product.

- i -

How to Use This Product Safely

Using This Document

This document contains important information for using the product safely.

Carefully read and understand this manual before using the product.

After reading this manual, store it with care at a place where it can be found at

any time, such as near the product.

Using Recycled Parts

In consideration of the environment, some recycled parts have been used in

this product.

Warning

This is a class A product of Electromagnetic Interference (EMI)

standard. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate

measures.

For United States Users

Federal Communications Commission

Radio Frequency Interference Statement

Warning

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses and can radio frequency

energy and, if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

- ii -

在中国使用时的注意

警告

此为 A 级产品。在生活环境中，该产品可能会造成无线电干扰。在这种情况下，可能需要用户

对干扰采取切实可行的措施。

电子信息产品安全使用期限

这标记是按照 2006 年 2 月 28 日公布的[电子信息产品污染控制管理办法]

以及 SJ/T11364-2006[电子信息产品污染控制标识要求]在中国销售的电

子信息产品的环保使用期限。如遵守关于这产品的安全或使用上的注意，

在这期限内(从生产日期起算)不会因产品中的有害物质漏到外部、或发生

突然变异，而引起环境污染和对人体或财产的重大影响。

产品中有毒有害物质或元素的名称及含量

有毒有害物质或元素

部件名称铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

机械单元 × ○ ○ ○ ○ ○

电源适配器 × ○ ○ ○ ○ ○

印刷电路组件 PCA* × ○ ○ ○ ○ ○

*：* 印刷电路组件包括所有印刷电路板 (PCB) 及其各自的离散组件、IC 和连接器。

○：表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363－2006规定的限量

要求以下。

×：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T11363－2006规定的

限量要求。

Notice

The contents of this manual may be revised without prior notice.

No part of this manual may be reproduced in any form without permission.

- iii -

Safety Precautions

Warning Marks

This document uses the following warning marks in order to ensure safe

and correct use of the product and to prevent any harm or damage to you or

to others.

Warning Caution

Used for instructions intended

to alert the user to the risk of

death or severe injury should

the product be used improperly

without paying attention to this

mark.

Used for instructions intended to

alert the user to the risk of injury

or material damage should the

product be used improperly without

paying attention to this mark.

Graphic Symbols Used and their Meanings, with Examples

The symbol alerts the user to warnings and

cautions. The specific meaning of the symbol is

determined by the design contained within the

triangle (in this example, caution for electric

shock).

The symbol alerts the user to actions that must

never be carried out (prohibited action). The

specific action that is prohibited is indicated inside

or to the side of the circle (in this example,

disassembly is prohibited).

The symbol alerts the user to actions that

must necessarily be performed. The specific action

is indicated by the design contained within the

circle (in this example, the power plug must be

removed from the outlet).

Warning

Only the AC adapter specified by Fujitsu Isotec may be used

with this printer. Using any other AC adapter carries the risk

of fire and electric shock.

When connecting the drawer kick cable, do not use any

method not specified in the instruction manual. This may

result in fire or electric shock.

Do not place metals or vessels containing water, such as a

vase, flower pot or cup on the top of, or near the product, or

pour water on it.

This may result in electric shock or fire.

- iv -

Do not place this product in places with high humidity, dust,

smoke or bad ventilation, or in places with fire hazards. This

may result in electric shock or fire.

When connecting the AC adapter, do not use voltages

outside the range indicated on the adapter. In addition, avoid

using multiple cords connected to one outlet. This may

result in electric shock or fire.

Do not insert or remove the power plug using wet hands.

This may result in electric shock or fire.

Do not scratch or tamper with the power cable.

Placing heavy objects on the power cable, pulling it, bending

it forcibly, twisting it, or tampering with it can damage the

power cable and result in fire or electric shock. Do not insert

or drop foreign matter, such as metals or combustible

materials, into the product from its aperture. This may result

in fire or electric shock.

- v -

- vi -

In case of emergency involving heat, smoke or acrid fumes

occurring, immediately turn off the power switch, and

remove the power plug from the outlet. Request the sales

company (or maintenance service center) for repair after

confirming the smoke has gone. Users must under no

circumstances whatsoever try to repair the product due to

the dangers involved. Using the product in the abnormal

state without taking any corrective action may result in fire

or electric shock.

If any foreign matter (such as a piece of metal or water or

other liquids) enters the product, immediately turn off the

power switch and remove the power plug from the outlet.

Afterwards, contact the sales company (or maintenance

service center). This may result in fire or electric shock if no

action is taken. When the product is dropped, or if the cover

or some other part is damaged, turn off the power switch,

and remove the power plug from the outlet. Afterwards,

contact the sales company (or maintenance service center).

Using the product without take any corrective action may

result in fire or electric shock.

When inserting the power cable into the AC adapter to

connect the product, be sure to confirm that the product power

switch has been turned off. Also, when inserting it into the

outlet, confirm that the AC adapter is properly connected to

the product. Not doing so result in electric shock.

In order to prevent any hazards from the vinyl bag that

packages this product, please place it out of the reach of

children.

In case of any accident with the bag, please consult a doctor

immediately.

If any dirt is found on or around the metal pins of the power

plug, wipe it off using a dry cloth. Not doing so may result in

fire.

Do not alter the product in any way. For internal check or

repair, please request the sales company (or maintenance

service center). There are high voltage parts and sharp

parts inside which can cause electric shock or injury.

Caution

Do not place heavy objects on the product.

This may destroy the balance and cause the product to fall

over or down, resulting in injuries.

Do not locate the product on a place with severe vibration, or

on an unstable or inclined surface. The product may fall over

or down, resulting in injuries.

Do not leave the product in high-temperature locations, such

as directly under the sun or near a heater, for long periods of

time. High temperature may cause the cover or other parts to

be heated, deformed, or melted, and the temperature inside

the product may also rise, resulting in fire.

Do not open the cover of the print section of the device and

insert any objects including your fingers during or

immediately after use. This may result in injury or burns.

Do not touch the print head or motor during or immediately

after printing.

This may result in burns.

During printer operation, do not touch the movable parts, such

as gears or cutters. Touching movable parts may result in

injury.

Do not touch the cutter blade.

As there is a cutter at the paper exit, do not attempt to insert

your hands inside it at any time, whether or not the printer is in

operation.

Do not open the cover of the print section of the device and

touch the print head during or immediately after use., This

may result in injury or burns.

- vii -

When shifting the product, be sure to remove the power plug

from the outlet. In addition, also remove the connection

cable, etc. Pay adequate attention to your feet while

performing the operation.

Scratching the power cable may result in electric shock

or fire, and injuries may also be caused if the product

falls over or down.

When removing the power plug, instead of pulling the

electric cord, be sure to remove it by gripping the power

plug.

If the power

cable is pulled, the core of the electric cord may

become exposed or broken, resulting in fire or electric

shock.

When the weather conditions indicate a chance of a lighting

strike, be sure to remove the power plug from the outlet for

safety.

Not doing so may result in fire.

When not using the device for a long time, be sure to remove

the power plug from the outlet for safety.

Not doing so may result in fire.

Firmly insert the power plug into the outlet.

An improper connection may result in fire or electric

shock.

- viii -

Otros manuales para FP-1000

Tabla de contenidos

Otros manuales de Impresora de Fujitsu

Fujitsu

Fujitsu DL1150 Manual de usuario

Fujitsu

Fujitsu FTP-639MCL354 Manual del propietario

Fujitsu

Fujitsu FTP-639MCL054 Manual de usuario

Fujitsu

Fujitsu FTP-631MCL351 Manual de usuario

Fujitsu

Fujitsu DotMax 24 series Manual de usuario

Fujitsu

Fujitsu DL3700 Pro Manual de usuario

Fujitsu

Fujitsu fi-7480 Manual de usuario

Fujitsu

Fujitsu DL1100 Manual de instrucciones

Fujitsu

Fujitsu DL2600 Manual de usuario

Fujitsu

Fujitsu FTP-627 Series Manual de usuario

Fujitsu

Fujitsu S510 - ScanSnap - Document Scanner Guía de configuración

Fujitsu

Fujitsu PrintPartner Manual de usuario

Fujitsu

Fujitsu FTP-631MCL301 Manual de usuario

Fujitsu

Fujitsu DL-3750+ Manual de usuario

Fujitsu

Fujitsu DL-6400 Manual de usuario

Fujitsu

Fujitsu FP-1100 Manual de usuario

Fujitsu

Fujitsu DL7400 Manual de usuario

Fujitsu

Fujitsu DL5800 Manual

Fujitsu

Fujitsu Impact 4550 PRO Manual de usuario

Fujitsu

Fujitsu FTP-638WSL Manual de usuario

Fujitsu

Fujitsu DPMG9 Manual de usuario

Fujitsu

Fujitsu Printer Manual de usuario

Fujitsu

Fujitsu DL1200 Manual de usuario

Fujitsu

Fujitsu Impact 3650 Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario