Fujitsu F2MC-16L Series Manual de usuario

FUJITSU SEMICONDUCTOR

CONTROLLER MANUAL

MC-16L/16LX EMULATOR

MB2147-01

HARDWARE MANUAL

CM42-00412-1E

Get other manuals https://www.bkmanuals.com

FUJITSU LIMITED

MC-16L/16LX EMULATOR

MB2147-01

HARDWARE MANUAL

Get other manuals https://www.bkmanuals.com

PREFACE

■Using the product safely

This manual provides important information on using this product safely. Read this manual

carefully before using the product to ensure correct use. In particular, carefully read "Safety

Precautions" in this Preface before using the product so that you understand the requirements

for safe use of the product.

After reading this manual, keep it handy for reference.

■Objectives and intended readers

The MB2147-01 is a development support tool used to develop and evaluate application

products that use the Fujitsu F2MC-16L/16LX microcontroller.

This manual is intended for the engineers who use the MB2147-01 (called the "emulator unit" in

this manual) to develop F2MC-16L and F2MC-16LX application products. The manual explains

how to handle and connect the emulator unit.

■Guarantee and liability

The specifications of this product may be changed without prior notice. The publisher assumes

no responsibility for any effect or incident resulting from the operation of this product.

■Trademark

F2MC is the abbreviation of FUJITSU Flexible Microcontroller.

Other system and product names in this manual are trademarks of respective companies or

organizations.

The symbols TM and ® are sometimes omitted in this manual.

Get other manuals https://www.bkmanuals.com

■Safety precautions

The table below lists important precautions contained in this manual and the pages on which

they occur.

Before using the product, read these pages so that you fully understand the requirements for

safe use of the product.

This symbol indicates that incorrect use of the product may result in death

or serious injury to the user.

Warning Description Page

Do not touch the inside of a connector port. Doing so may result in electric

shock or device problems. 16

If the product emits excessive heat, smoke, an offensive smell, or an

unusual noise, turn off power immediately. Then, disconnect the power

plug from the outlet. If smoke was detected, make sure that no more smoke

is coming from the product. Then, contact our sales or support department

to request that the product be repaired. Do not attempt to repair the product

by yourself. Otherwise, personal injury, damage to the product, or other

property damage may result. Using such a product without having it

properly repaired may result in fire or electric shock.

If water or other liquid, a metallic object, or other foreign matter enters the

product, immediately turn off power, and disconnect the power plug from

the outlet. Then, consult with our sales or support department. Using the

product under such abnormal conditions may result in device problems,

fire, or electric shock.

Disconnect the power plug during electrical storms. Using the product

during an electrical storm may result in damage to the product or fire. 16

Do not open the product case. Do not modify the product without

permission. Doing so may result in device problems, fire, or electric shock. 16

Do not use the product near water such as near a bath or shower. Doing so

may result in device problems, fire, or electric shock. 16

WARNING

Electric shock

Plug

No disassembly

No moisture

Get other manuals https://www.bkmanuals.com

iii

This symbol indicates that incorrect use of the product may result in death

or serious injury to the user.

Warning Description Page

Do not touch the product with wet hands. Doing so may result in electric

shock. 17

Do not place the product in a location exposed to excessive moisture or

dust or in a poorly ventilated location. Do not place the product near an

open flame. Doing so may result in device problems, fire, or electric shock.

Do not block the product ventilation holes. Doing so may cause generation

of excessive heat, possibly resulting in a fire. 17, 19

Do not insert metallic, combustible, or other objects or allow them to drop

into the product through a ventilation hole or other opening. Doing so may

result in device problems, fire, or electric shock.

Do not use a voltage other than the indicated value of supply voltage. Do

not connect power cable together with too many plugs to an outlet. Doing

so may result in fire or electric shock.

The product must not be scratched, modified, forcibly bent, pulled, twisted,

or exposed to heat. Do not place heavy objects on the product. Doing so

may result in device problems, fire, or electric shock.

Do not use the product if it has a fault, damage, or sever wires in the cable.

Doing so may result in fire or electric shock. 19

WARNING

Prohibition

Get other manuals https://www.bkmanuals.com

This symbol indicates that incorrect use of the product may result in minor

or moderate injury to the user, in damage to the product and any devices

connected to it, or in the destruction of data and other software resources

or other property.

Warning Description Page

Disconnect the power plug before moving the product. Disconnect all other

connected cables. Exercise caution when working near cables on the floor.

Damage to a cable may result in fire or electric shock. A falling device may

result in injury.

If the product is not to be used for an extended period, disconnect the

power plug. Doing so may result in fire or electric shock. 18

Do not place the product in a location exposed to shock or a location that is

not level or stable. Doing so may result in device problems or the product

falling over or falling on the floor.

Do not grasp the cable when unplugging the power plug and cable. Always

grasp the power plug or connector itself. Pulling the cable may expose

conductors or sever wires in it, possibly resulting in device problems, fire,

or electric shock.

18, 19,

25, 26,

27, 28,

29, 30,

31, 32

Do not place the product in a location, such as near a speaker or television

tuner, where it is exposed to an electromagnetic field. Doing so may result

in device problems.

Make sure that power to the product is turned off and the power plug is

disconnected from outlets before connecting or disconnecting cables,

removing or mounting boards, handling switches or jumpers, or mounting

parts (unless such an operation uses USB cables for plug-and-play

devices). Doing so may result in device problems or electric shock.

To prevent device damage by electrostatic discharge, do not touch, and do

not let any object contact pins of connectors or other parts of the product.

Before handling the product, be sure to discharge static electricity from

your body by touching a metallic object, such as doorknob. Doing so may

result in device problems.

Do not apply any shock to this product. Doing so may result in device

problems. 20

Do not expose the product to direct sunlight, and do not place it where it is

hot and humid. Do not allow condensation to form on the product. 20

Do not store the product in a dusty location. Doing so may result in device

problems. 20

Do not store the product where it is exposed for a long time to relatively

strong electric or magnetic fields. Because the product uses many

electronic components, problems may result.

CAUTION

Plug

Prohibition

Get other manuals https://www.bkmanuals.com

This symbol indicates that incorrect use of the product may result in minor

or moderate injury to the user, in damage to the product and any devices

connected to it, or in the destruction of data and other software resources

or other property.

Warning Description Page

Make sure that power to the product is turned off and the power plug is

disconnected from outlet before removing or mounting boards. Doing so

may result in device problems or electric shock.

When mounting a board, make sure that it is mounted in the proper

direction. Doing so may result in device problems. 23

Do not apply pressure on one part of a board when mounting the board.

Attempt to distribute equal pressure on the entire board. Doing so may

result in damage to the board.

Make sure that power to the product is turned off and the power plug is

disconnected from outlets before connecting or disconnecting cables.

Doing so may result in device problems or electric shock.

25, 26, 27,

28, 29, 31,

Make sure that power to the product is turned off and the power plug is

disconnected from outlets before connecting or disconnecting cables

(unless such an operation uses USB cables for plug-and-play devices).

Doing so may result in device problems or electric shock.

Make sure that power to the product is turned off and the power plug is

disconnected from outlets before mounting the evaluation MCU. Doing so

may result in device problems or electric shock.

Make sure that power to the product is turned off and the power plug is

disconnected from outlets before mounting crystal unit or handling switches

or jumpers. Doing so may result in device problems or electric shock.

Make sure that power to the product is turned off and the power plug is

disconnected from outlets before handling jumpers. Doing so may result in

device problems or electric shock.

38, 40

Make sure that power to the product is turned off and the power plug is

disconnected from outlets before handling switches. Doing so may result in

device problems or electric shock.

41, 42

Follow the procedure described in the manual to turn on the product. Doing

so may result in device problems. 47

After power is turned on to the product, do not move the system, or apply

any shock or vibration to it. Doing so may result in device problems. 47

Follow the procedure described in the manual to turn off the product. Doing

so may result in device problems. 49

CAUTION

Prohibition

Get other manuals https://www.bkmanuals.com

This symbol indicates that incorrect use of the product may result in minor

or moderate injury to the user, in damage to the product and any devices

connected to it, or in the destruction of data and other software resources

or other property.

Warning Description Page

To re-transport the product, use the package used at the delivery, and pack

them as it was packed. Doing so may result in damage to the product. 2

Insert the power plug so that the connection is secure. Doing so may result

in device problems or fire. 18, 32

Use the product according to its specifications. Doing so may result in

device problems. 5

CAUTION

Attention

Caution

Get other manuals https://www.bkmanuals.com

Otros manuales para F2MC-16L Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Microcontrolador de Fujitsu

Fujitsu

Fujitsu MB91460 SERIES Manual de usuario

Fujitsu

Fujitsu MB91150 Series Manual de usuario

Fujitsu

Fujitsu F2MC-8FX Series Manual de usuario

Fujitsu

Fujitsu F2MC-8L MB89620 Series Manual de usuario

Fujitsu

Fujitsu MB90480 Series Manual de usuario

Fujitsu

Fujitsu Cremson Series Manual de usuario

Fujitsu

Fujitsu FR Series Instrucciones de instalación y funcionamiento

Fujitsu

Fujitsu MB95200 Series Manual de usuario

Fujitsu

Fujitsu FR Series Instrucciones de instalación y funcionamiento

Fujitsu

Fujitsu F2MC-16LX Series Manual de usuario

Fujitsu

Fujitsu F2MC-FR Series Instrucciones de instalación y funcionamiento

Fujitsu

Fujitsu FR Family FR60 Lite Manual de usuario

Fujitsu

Fujitsu MB95630H Series Manual de usuario

Fujitsu

Fujitsu MB95100 Series Instrucciones de instalación y funcionamiento

Fujitsu

Fujitsu F2MC-16LX Series Manual de usuario

Fujitsu

Fujitsu MB86R01 Instrucciones de instalación y funcionamiento

Fujitsu

Fujitsu ALL Series Instrucciones de instalación y funcionamiento

Fujitsu

Fujitsu F2MC-8FX Series Manual de usuario

Fujitsu

Fujitsu F2MC-8FX Series Instrucciones de instalación y funcionamiento

Fujitsu

Fujitsu MB91460 SERIES Instrucciones de instalación y funcionamiento

Fujitsu

Fujitsu F2MC-8FX MB95200H/210H Series Instrucciones de instalación y funcionamiento

Fujitsu

Fujitsu MB89P935 Manual del operador

Fujitsu

Fujitsu F2MC-8FX Series Instrucciones de instalación y funcionamiento

Fujitsu

Fujitsu F2MC-16LX Series Instrucciones de instalación y funcionamiento

Manuales populares de Microcontrolador de otras marcas

AMS

AMS AS7261 Demo Kit Manual de usuario

Novatek

Novatek NT6861 Manual de usuario

Espressif Systems

Espressif Systems ESP8266 SDK Guía de configuración

Nuvoton

Nuvoton ISD61S00 ChipCorder Guía

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manual de usuario

Texas Instruments

Texas Instruments Chipcon CC2420DK Manual de usuario

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manual de usuario

NEC

NEC 78GK0S/K 1+ Series Instrucciones de instalación y funcionamiento

Mikroe

Mikroe SEMITECH N-PLC Click Instrucciones de instalación y funcionamiento

Intel

Intel Agilex Manual de usuario

Cypress

Cypress CY4607 HX2VL Manual de usuario

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manual de usuario

Texas Instruments

Texas Instruments TMS320F2837 D Series Manual de usuario

CYPRES

CYPRES CY14NVSRAMKIT-001 Manual de usuario

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manual de usuario

Espressif Systems

Espressif Systems ESP8266EX Instrucciones de funcionamiento

Abov

Abov AC33M8128L Manual de usuario

Laird

Laird BL654PA Manual de usuario