Fujitsu DESKPOWER 2000 Series Manual de usuario
DESKPOWER 2000 Series User’s Manual
Fujitsu endeavours to ensure that the information in this document is correct,
but accepts no liability for any error or omission in the same. Any procedures described in
this document for operating Fujitsu products should be read and understood by the
operator before such products are used. To ensure that Fujitsu products function without
risk to safety and health, such procedures should be strictly observed by the operator.
The development of Fujitsu products and services is continuous and published
information may not be up to date. Any particular issue of a product may contain facilities
not described herein. It is important to check the current position with Fujitsu.
Specifications and statements as to performance in this document are Fujitsu estimates
intended for general guidance. They may require adjustment in par ticular circumstances
and should therefore not be taken as formal offers or commitments.
DESKPOWER is a trademark of Fujitsu Limited. The following are registered trademarks of
Microsoft Corporation: MS, MS-DOS, Windows®NT, Windows®for Workgroups, Windows®
98, Window®2000. Pentium®, Celeron and MMX™ technology are trademarks of Intel
Corporation. Award is the registered trademark of Award Software International Inc.
All other products are trademarks or registered trademarks of their respective companies.
© Copyright 2000 Fujitsu Limited. All rights reserved. No par t of this publication may be
copied, reproduced, or translated without the prior written consent of Fujitsu Limited. No
part of this publication may be stored or transmitted in any electronic form without the
written consent of Fujitsu Limited.
© Copyright Fujitsu PC (Asia) Pte Ltd
Fujitsu PC (Asia) Pte Ltd
200 Pandan Loop
#05-03 Pantech 21
The Computer Centre
Singapore 128388
Tel: 65-776 0688
Fax: 65-776 0788
01Carrol_intro i-ix 17/06/2000, 13:491
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions carefully. Save these instructions for future reference.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water.
5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing
serious damage to the product.
6. Slotsandopeningsinthecabinetandthebackorbottomareprovidedforventilation;toensure
reliableoperationoftheproductandtoprotectitfromoverheating,theseopeningsmustnotbe
blocked or covered. The openings should never be blocked by placing the product on a bed,
sofa,rug,or othersimilarsurface. Thisproductshould neverbeplaced nearorover aradiator
or heat register, or in a built-in installation unless proper ventilation is provided.
7. This product should be operated from the type of power indicated on the marking label. If you
are not sure of the type of power available, consult your dealer or local power company.
8. This product is equipped with a 3-wire grounding-type plug, a plug having a third (grounding)
pin. This will only plug into a grounding-type power outlet. This is a safety feature. If you are
unabletoinserttheplugintotheoutlet,contactyourelectriciantoreplaceyourobsoleteoutlet.
Do not defeat the purpose of the grounding-type plug.
9. Do not allow anything to rest on the power cord. Do not locate this product where persons will
walk on the cord.
10. If an extension cord is used with this product, make sure that the total ampere rating of the
equipmentpluggedintotheextensioncorddoesnotexceedtheextensioncordampererating.
Also,makesurethatthetotalratingofallproductspluggedintothewalloutletdoesnotexceed
15 amperes.
11. Never push objects of any kind into this product through cabinet slots as they may touch
dangerous voltage points that could result in a fire or electric shock. Never spill liquid of any
kind on the product.
12.Donotattempttoservicethisproductyourself,asopeningorremovingcoversmayexposeyou
to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.
01Carrol_intro i-ix 17/06/2000, 13:492
13.Unplugthisproductfromthewalloutletandreferservicingtoqualifiedservicepersonnelunder
the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the product.
c. If the product has been exposed to rain or water.
d. Iftheproductdoesnotoperatenormallywhentheoperatinginstructionsarefollowed.Adjust
onlythosecontrolsthatarecoveredbytheoperatinginstructionssinceimproperadjustment
ofothercontrolsmay resultindamageandwill oftenrequireextensivework bya qualified
technician to restore the product to normal condition.
e. If the product has been dropped or the cabinet has been damaged.
f. If the product exhibits a distinct change in performance, indicating a need for service.
14. CAUTION.Whenreplacingthebattery,besuretoinstallitwiththepolaritiesinthecorrect
position. There is a danger of explosion if the battery is replaced with an incorrect type
or is mistreated. Do not recharge, disassemble or dispose of in fire. Replace only with
the same or equivalent type recommeded by the manufacturer. Dispose of the used
battery according to the manufacturer’s instructions.
15. Use only the proper type of power supply cord set (provided in your accessories box) for this
unit. It should be a detachable type: UL listed/CSA certified, BS1363,ASTA,SS145 certified,
rated 10A 250V minimum, VDE approved or its equivalent. Maximum length is 15 feet (4.6
meters).
01Carrol_intro i-ix 17/06/2000, 13:493
■Conventions used in this manual
●Warning icons
Various icons and icon/word combinations are used in this manual. They are used to encourage
you to use the equipment safely and correctly in order to prevent danger and damage that may
occurtoyouandpeoplearoundyou. Thefollowingparagraphsdescribewhateachiconlookslike
and what it means. Please ensure you understand the purpose and meaning of each icon before
reading the corresponding instructions.
Indicatesa danger of deathorserious injury if thePC is handled
incorrectlyby ignoring the correspondinginstruction.
Indicatesa danger of injuryorphysical damage if thePC is handled
incorrectlyby ignoring the correspondinginstruction.
In some cases, the following icons are also used along with the above icon/word combinations to
detail the related danger and damage.
Theicon indicates the corresponding instructionhasa nature of
warningor caution. The meaningof thewarning or caution is
symbolizedin the iconand outlinedabove it.
Theicon indicates the corresponding instructionisintended to tell
younot to do something. Themeaningof the instruction issymbolized
inthe icon and outlinedaboveit.
The icon ●indicatesthe corresponding instructionis intendedto tell you
todo something. The meaning oftheinstruction is symbolized inthe
iconand outlined aboveit.
●Representing keys and how to use them
Inthetextofthemanual,keyboardkeysarerepresentedusingonlynecessarycharactersasshown
below rather than describing all the indication on each key top.
Example: [Ctrl] key, [Enter] key, and [→] key
When more than one key is to be pressed simultaneously, they are represented as shown below:
Example: [Ctrl] + [F3] and [Shift] + [↑]
●Representing buttons
Buttons displayed on the screen are enclosed in square brackets, [ and ], as shown below:
Example: [OK]
●Command entries
In the text of the manual, a command is represented as shown below:
diskcopy a: a:
↑ ↑
Ablank(shownwith↑)betweencharactersmeansthatthe[Space]key(longbaronthefrontofthe
keyboard) is to be pressed once. Command names are represented in lower case, but they may
be entered using uppercase letters.
WARNING
CAUTION
01Carrol_intro i-ix 17/06/2000, 13:494
●Conventions used in the text of the manual
The symbols used in the text of the manual have meanings as explained below:
Information necessary to run hardware or software correctly.
Informationonhowtoundoanincorrectoperationorhowtocarryout
troubleshooting.
●Screen display examples
Screendisplaysgiveninthismanualareexamples.Theymaybedifferentfromthedisplays(including
file names) that actually appear on your display unit screen.
●Illustrations
Illustrations given in this manual are examples. They may be different from those which actually
appear on your PC screen, depending on installed options.
●Referencing products
In this manual, products are referred to using their respective abbreviations as explained below:
Windows 98 refers to Microsoft
®
Windows
®
98 operating system.
WindowsNT4.0andWindowsNTrefertoMicrosoft
®
WindowsNT
®
Servernetworkoperatingsystem
Windows 2000 refers to Microsoft
®
Windows
®
2000 operating system.
Version 4.0 and Microsoft
®
Windows NT
®
Workstation operating system Version 4.0.
MS-DOS refers to Microsoft
®
MS-DOS
®
operating system Version 6.2/V.
ICU refers to ISA Configuration Utility.
The terms "your PC," "the PC," "your PC main unit," and "the PC main unit" refer to the
DESKPOWER 2000.
???
Note the following
Help
01Carrol_intro i-ix 17/06/2000, 13:495
■Warning and caution labels
Your PC bears the warning and caution labels as shown below.
Never detach or soil the warning or caution labels.
● Rear surface of the equipment
Electric shock
WARNING
●Before starting to mount or dismount an optional unit for your PC, switch
off the PC and all units linked to it, and unplug them from their respective
outlets.
Otherwise, electric shock may occur.
When removing exterior parts
in order to mount option parts
or others inside the cabinet,
switch off the power supply for
PC unit and peripheral devices
linked with it, and disconnect
the power cable from outlet
before working to avoid risk of
electric shock.
Electric Shock
WARNING
FUJITSU LIMITED
MADE IN JAPAN
UL
FC
DESKPOWER
MODEL FPC-M05AAD
P/N CP019141-01
100-120/200-240V
3.5/1.7A 50/60Hz
K
LISTED
UL1850
7J61
01Carrol_intro i-ix 17/06/2000, 13:496
Chapter 1Installation and Connection
This chapter describes what precautions you should take when
installing your PC and explains how to connect cables.
Before starting to assemble the PC, read this chapter.
Chapter 2Basic Operations
This chapter explains basic operations required to use the PC, such
as how to switch on and off the power and handle storage media.
Be sure to read this chapter.
Chapter 3Troubleshooting
This chapter explains what to do if your PC does not operate as you
expect or if an error message appears.
Read this chapter as required.
Appendix
This appendix describes the name of each component of your PC,
informationrelatedtomaintenanceofthePC,thespecificationofthe
PC main unit, and notices.
Read through this appendix.
Manualconfiguration
01Carrol_intro i-ix 17/06/2000, 13:497
Content
CHAPTER 1
Installation and Connectioon
Where to install...................................................................2
Example of installing the PC...............................................2
Preventing electromagnetic interference with aTV and
radio....................................................................................3
Attaching CRT display unit, keyboard, mouse, and LAN
cables .................................................................................5
Connecting the power cord.................................................6
CHAPTER2
Basic Operation
1 Switching on ..........................................................................8
2 Switching off ..........................................................................9
Switching off the power via Windows 95/98
(onWindows 95/98 models) ...............................................9
Switching off the power via Windows NT
(onWindows NT models) .................................................10
Switching off the power via Windows 2000
(onWindows 2000 models) ..............................................11
3 Reset .....................................................................................12
Soft reset ..........................................................................12
4 Floppy Disk ..........................................................................14
Handling precautions........................................................14
Inserting and removing a floppy disk ................................14
5 CD-ROM................................................................................15
Handling precautions........................................................15
Inserting and taking out a CD-ROM disk..........................16
6 Hard Disk .............................................................................. 17
What is the hard disk? ......................................................17
Handling precautions........................................................17
02Carrol_Content 17/06/2000, 13:498
CHAPTER3
Installing Internal Options
Installation Precautions ....................................................20
ESD Precautions ..............................................................20
Pre-installation Instructions ..............................................20
Post-installation Instructions.............................................21
Installing an expansion card .............................................23
CHAPTER4
Troubleshooting
Trouble information related to the PC main body and
peripheral equipment........................................................26
Trouble information concerning Windows 98 ....................27
APPENDIX
1 Name and Function of Each Component ..........................30
Front of the system unit ....................................................30
Back of the system unit ....................................................32
2 Standard Specifications......................................................34
02Carrol_Content 17/06/2000, 13:499
CHAPTER 1
Installation and
Connection
03Carrol(1-6) 17/06/2000, 13:491
Otros manuales para DESKPOWER 2000 Series
2
Tabla de contenidos
Otros manuales de De oficina de Fujitsu
Fujitsu
Fujitsu CELSIUS W5012 Manual de usuario
Fujitsu
Fujitsu SMARTCASE S500 Manual de usuario
Fujitsu
Fujitsu ESPRIMO P5635 Manual de usuario
Fujitsu
Fujitsu ErgoPro m664 Series Manual de usuario
Fujitsu
Fujitsu ESPRIMO E420 E85+ Manual de usuario
Fujitsu
Fujitsu AMILO Pro Hoja de información del producto
Fujitsu
Fujitsu 5000 Series Manual de usuario
Fujitsu
Fujitsu FUTRO S900 Manual de usuario
Fujitsu
Fujitsu Supercomputer PRIMEHPC FX700 Manual de usuario
Fujitsu
Fujitsu DESKPOWER E623 Manual de usuario
Fujitsu
Fujitsu CELSIUS M4 Series Manual de usuario
Fujitsu
Fujitsu CELSIUS W370 E85+ Manual de usuario
Fujitsu
Fujitsu Siemens CELSIUS 4 Series Manual de usuario
Fujitsu
Fujitsu DESKPOWER 5000 Series Manual de usuario
Fujitsu
Fujitsu Esprimo E5 Series Manual de usuario
Fujitsu
Fujitsu ESPRIMO C720 Manual de usuario
Fujitsu
Fujitsu ESPRIMO P5 Series Manual de usuario
Fujitsu
Fujitsu ESPRIMO PH300 Manual de usuario
Fujitsu
Fujitsu ESPRIMO E5635 Manual de usuario
Fujitsu
Fujitsu ESPRIMO K55x/24 Series Manual de usuario
