Fujitsu MB2147-01 Instrucciones de instalación y funcionamiento

Confidential

How to Install/Update USB Driver for the Fujitsu

MB2147-01 and MB2198-01 Emulator System

Application Note

Fujitsu Microelectronics America, Inc.

Table of Contents

Introduction.........................................................................................................................................................................1

USB DriverVersion................................................................................................................................................................1

Difference from the Previous USB DriverVersion.......................................................................................................................1

USB Driver Uninstallation Procedure ......................................................................................................................................2

USB Driver Installation Procedure ..........................................................................................................................................3

Driver Conﬁrmation ..............................................................................................................................................................3

USB Driver Installation from Found New HardwareWizard........................................................................................................4

Restoring the Previous Driver .................................................................................................................................................4

Common USB Driver Errors and Possible Solutions...................................................................................................................5

How to Install/Update USB Driver for the Fujitsu

MB2147-01 and MB2198-01 Emulator System

Introduction

The Fujitsu emulator systems are required to perform complex

debugging of test code on target systems.The Fujitsu emulator

systems provides complex debugging functions such asWatch and

Trace to help the user debug the software through communication

that exists between IDE (SW) and the emulator system (HW).

The Fujitsu emulator systems provide an option to communicate to

the Softune workbench using RS232, USB or LAN.Among these

options, USB connectivity is most commonly preferred by the user

because of the speed, ease of conﬁguration and unavailability of

RS232 ports in recent PC system.A USB driver installation is

required on PCs that will communicate to the emulator systems

using USB.

This application note provides the step by step procedure for the

USB driver version 9.0 installations on both the MB2147-01

MC-16LX emulator) and MB2198-01 (F

MC-16FX and

32-bitFRemulator)andhow to roll-backto the previousversionif

required.

USB DriverVersion

The current USB driver version is 9.01. Prior to this, Softune

Workbench has two previous versions of the USB driver

(version 7.02 and 1.4.0.1).The current installed version of the

driver can be checked with a device manager by displaying the

driver’s properties dialog as shown below.

1. The driver ﬁle name is“

SiUSBd.sys

”.

2. The driver ﬁle name is“

windrvr6.sys

” and its version is“

7.02

”.

Difference from the Previous USB

Driver version

The new USB driver version 9.01 has been changed in the following

items from the previous version 7.02 and earlier.

1. OS Compatibility

The new Driver supports the following OSs:

Windows 2000/XP/

Vista

(added)

Note that this driver supports only 32-bit version OS.

2. Display by Device Manager

After the driver is installed, the content displayed by the device

manager has increased.

[USB]-[FUJITSU USB Driver for ICE]

[Jungo]-[WinDriver](added)

Fujitsu Microelectronics America, Inc.

Application Note

3. Change in File Composition

The ﬁle composition of the package is changed.

From CD-ROM:

InstUSB_v901_01 Folder

SiUSB.dll

wdapi901.dll

DriverInstall_jpn.pdf

Driver folder

windrvr6.sys

windrvr6.inf

wdreg.exe

wdreg16.exe

SiUSBd_wdrv.inf

wd901.cat

difxapi.dll

drv_install.bat

USB Driver Uninstallation Procedure

It is required to uninstall the previous USB driver before installing

the USB driver version 9.01.The uninstallation procedures of the

previous driver are as follows:

• Connect ICE with PC in USB, and turn ON the emulator.

•When the previous driver is installed, the following is

displayed in the device manager, USB or Jungo.

[USB] – [FUJITSU USB Driver for ICE]

[Jungo] – [FUJITSU USB Driver for ICE]

Note:

When the above description is not displayed, install the driver

without taking any measures.

• Right click on the [FUJITSU USB Driver for ICE] and

click“

Uninstall

”.

A conﬁrmation message will appear as below to conﬁrm the device

removal. Click

to proceed with uninstallation procedure:

Fujitsu Microelectronics America, Inc.

How to Install/Update USB Driver

USB Driver Installation Procedure

The installation procedures for the USB driver are as follows:

1. Copy SiUSB.dll under the“

Softune\bin

” directory

2. Copy wdapi901.dll under“

windir\system32

” directory.

“Windir”is a directory path deﬁned by the system

environment variable of Windows system.

3. Execute the batch ﬁle (drv_install drv_install.bat) from the

command line. In this case, make the driver directory to the

current directory on the command prompt.

Now the installation of the USB driver is completed.

Driver Conﬁrmation

To conﬁrm whether USB driver is correctly installed by the above

procedures, check the driver ﬁle“

windrvr6.sys

” in the detailed

dialogof [USB]-[FUJITSUUSBDriver forICE] of Devicemanager.

Conﬁrm whether the driver versions are 9.01 in the following two

categories of Property dialog of the device manager.

[Jungo]-[WinDriver]

[USB]-[FUJITSU USB Driver for ICE]

Fujitsu Microelectronics America, Inc.

Application Note

USB Driver Installation from Found

New Hardware Wizard

It has been observed that in some cases, even though the USB driver

has been installed, it is not recognize by the PC when the Fujitsu

emulator systems are connected. In this case, when ICE is connected,

the PC will pop up the found new hardware wizard to install the

driver again. In this situation, select the dialog:“

Installation a list

or speciﬁcation

” and click the“

” b utton.

Specify“

InstUSB_v901_01\driver

” in CD-ROM for the directory

to be retrieved as follows and click the“

” button. Now the

driver retrieval starts from“InstUSB_v901_01\driver” directory.

Restoring the Previous Driver

If the driver version 9.01 does not operate correctly byWindows

2000/XP, restoring the previous version of the driver should be

performed. In this case, use the USB driver package“

WinDriver

ver-7.02

” or earlier.The procedure is shown as follows.

1. Copy SiUSB.dll of the previous version to the following

directory

(

)

: Under the bin of SOFTUNE installation directory

2. Copy wd_utils.dll to the following directory (

: windir\system32

windir is a directory path deﬁned in the system environment

variable of Windows system.

3. Execute the batch ﬁle (drv_install.bat) from the command

line.

In this case, make the driver directory be the current directory on

the command prompt.

4. Conﬁrm the following two items after implementing steps 1

to 3 on the Device manager by connecting the Emulator system

with USB cable:

(1) Only [USB] - [FUJITSU USB Driver for ICE] is displayed in

the device manager.

* [Jungo] - [WinDriver] should not be displayed.

(2)Inthe propertiesdialogof [USB]-[FUJITSUUSBDriverfor

ICE] at Device manager, the version of 7.02 shall be displayed.

If the result is not same as in Item 4, it is required to execute Item 5

and then implement steps 1 to 3 again.

Fujitsu Microelectronics America, Inc.

How to Install/Update USB Driver

5. Delete the following ﬁles.

\Windir\system32\drivers\windrvr6.sys

\Windir\inf\SiUSBd_wdrv.inf

\Windir\inf\SiUSBd_wdrv.pnf

\Windir\inf\windrvr6.inf

\Windir\inf\windrvr6.pnf

Windir is a directory path deﬁned in the system environment

variable of Windows system.

Common USB Driver Errors and

Possible Solutions

•If the USB driver is not installed properly, the Softune

Workbench will show an error as“

Invalid communication

”

when trying to connect with the Emulator system. In this case,

it is required to reconﬁrm the driver installation and version.

If the problem doesn’t solve by reinstallation, then it is required

to roll back to previous driver.

• In some systems, the USB driver installation will pop up even

though the driver has been already installed before.To avoid the

reinstallation again, try power ON/OFF sequence or switch the

USB port on PC.

If the above problem still persists then contact Fujitsu Support,

mcugr[email protected]

FUJITSU MICROELECTRONICS AMERICA, INC.

Corporate Headquarters

1250 East Arques Avenue, M/S 333, Sunnyvale, California 94085-5401

Tel: (800) 866-8608 Fax: (408) 737-5999

E-mail: [email protected] Web Site: http://us.fujitsu.com/micro

All company and product names are trademarks or registered

trademarks of their respective owners.

Printed in U.S.A. MCU-AN-21299-4/2008

FUJITSU SEMICONDUCTOR

CONTROLLER MANUAL

DSU-FR EMULATOR

MB2198-01

HARDWARE MANUAL

CM71-00413-2E

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de computadora de Fujitsu

Fujitsu

Fujitsu F2 MC-8FX Family Manual de usuario

Fujitsu

Fujitsu MB2198-16FX-120P-M21 Manual de usuario

Fujitsu

Fujitsu MB91F109 FR30 Manual de usuario

Fujitsu

Fujitsu MB2031-20 Manual de usuario

Fujitsu

Fujitsu 560H SERIES Manual de usuario

Fujitsu

Fujitsu 467 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX150 S2 Manual de usuario

Fujitsu

Fujitsu F2MC-8FX MB2146-213 Manual de usuario

Fujitsu

Fujitsu F2MC-16FX MB2198 Manual de usuario

Fujitsu

Fujitsu PG-126 Manual de usuario

Fujitsu

Fujitsu MB2198-590-E Manual de usuario

Fujitsu

Fujitsu F2MC-16L Series Manual de usuario

Fujitsu

Fujitsu SOFTUNE F2 MC-16 Manual de usuario

Fujitsu

Fujitsu F2MCTM-16LX Manual de usuario

Fujitsu

Fujitsu SK-86R12-CPU01 Manual de usuario

Fujitsu

Fujitsu FMC-16LX/FR Manual de usuario

Fujitsu

Fujitsu MB86R12 Manual de instrucciones

Fujitsu

Fujitsu LAVENDER Manual del operador

Fujitsu

Fujitsu MB2145-507 Manual de usuario

Fujitsu

Fujitsu MB2198-503-E Manual de usuario

Fujitsu

Fujitsu 8FX Manual de usuario

Fujitsu

Fujitsu Oracle M10-1 Manual de usuario

Fujitsu

Fujitsu LQFP-100P Manual de usuario

Fujitsu

Fujitsu MPA3022AT Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario