Fujitsu Siemens Computers Fujitsu Siemens SCENICVIEW P17-2 Manual de usuario

Monitor

Operating Manual

English

SCENICVIEW P17-2 / P19-2 /

P19-2P / P20-2 / P20-2S

Are there…

... any technical problems or other questions which you would like to be clarified?

Please contact

our help desk (see Warranty Booklet).

The latest information on our products, tips, updates, etc., can be found on the internet under:

http://www.fujitsu-siemens.com

This manual was produced by

Xerox Global Services

Published by

Fujitsu Siemens Computers GmbH

Order No.: A26361-K983-Z120-1-7619

Edition 6

AG 01/09

SCENICVIEW P17-2 /

P19-2 / P19-2P / P20-2 /

P20-2S

LCD monitor

Operating Manual

January 2009 edition

VESA, DDC and DPMS are registered trademarks of Video Electronics Standards

Association.

All rights, including rights of translation, reproduction by printing, copying or similar methods,

in part or in whole, are reserved.

Offenders will be liable for damages.

All rights, including rights created by patent grant or registration of a utility model or design,

are reserved.

Delivery subject to availability. Right of technical modification reserved.

A26361-K983-Z120-1-7619, edition 6

Contents

Introduction........................................................................................................................................... 1

Notational conventions ................................................................................................................. 2

Important notes..................................................................................................................................... 2

Safety notes.................................................................................................................................. 2

Power cable.................................................................................................................................. 4

Transport ...................................................................................................................................... 4

Cleaning ....................................................................................................................................... 4

CE marking................................................................................................................................... 4

FCC Class B Compliance Statement ........................................................................................... 5

Declaration of Conformity............................................................................................................. 5

Energy Star Guidelines................................................................................................................. 6

Disposal and recycling ................................................................................................................. 6

Checking the contents of the consignment........................................................................................... 7

Installing an ergonomic video workstation............................................................................................ 8

Mounting and removing the monitor base ............................................................................................ 9

Folding out monitor base.............................................................................................................. 9

Removing monitor base ............................................................................................................. 11

Connecting the monitor .............................................................................................................. 11

Connecting cables to the monitor............................................................................................... 12

Connecting cables to the computer............................................................................................ 13

Operation of the monitor..................................................................................................................... 13

Adjusting height, rake and rotation.............................................................................................13

Adjusting portrait format ............................................................................................................. 14

Switching the monitor on/off ....................................................................................................... 14

Notes on power management .................................................................................................... 15

Changing the monitor settings.................................................................................................... 16

Notes on ergonomic colour adjustment.............................................................................................. 21

Troubleshooting.................................................................................................................................. 22

Notes regarding the DIN EN ISO 13406-2 standard .......................................................................... 24

Technical data .................................................................................................................................... 25

VESA-DDC-compatible VGA interface....................................................................................... 26

Preset operating modes ............................................................................................................. 26

Pin assignment D-SUB............................................................................................................... 27

Monitor port DVI-D...................................................................................................................... 27

Contents

A26361-K983-Z120-1-7619, edition 6

A26361-K983-Z120-1-7619, edition 6 1

Introduction

Your new LCD (Liquid Crystal Display) monitor SCENICVIEW P17-2 / P19-2 / P19-2P / P20-2 /

P20-2S offers numerous features and functions, for example:

●TFT display (Thin Film Transistor; active matrix)

●minimal space requirements thanks to slim casing

●optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour

purity right into the corners)

●high degree of brightness and good contrast

●high resolution (1280 x 1024 on P17-2 and P19-2 / P19-2P, 1600 x 1200 on P20-2 / P20-2S)

●size of the display area comparable to that of a 19" (P17-2), 21" (P19-2 / P19-2P) or 22"

(P20-2 / P20-2S) CRT (Cathode Ray Tube) monitor

●presentation of up to 16.7 million colours (in conjunction with an appropriate graphics card)

●automatic scanning of horizontal frequencies from 30 to 82 kHz and refresh rates (vertical

frequencies) from 56 to 76 Hz (absolutely flicker-free)

●digital screen controller with microprocessor for storing 26 different display modes

●freely adjustable colour alignment for matching the screen colours to the colours of various

input and output devices

●convenient operation via integrated OSD (On-Screen-display) menu

●VESA-DDC compatibility

●VESA-FPMPMI compatibility (Flat Panel Monitor Physical Mounting Interface) – Mounting

device for swivel arm and wall bracket

●plug&play capability

●power management for reducing power consumption when the computer is not in use

●compliance with the recommendations in accordance with TCO’03

●The monitor fulfils all GS (“Geprüfte Sicherheit”, Certified Security) requirements.

This operating manual contains important information you require to start up and run your LCD

monitor.

A graphics card (screen controller) with VGA interface or a digital graphics card with DVI interface is

required to control the SCENICVIEW P17-2 / P19-2 / P19-2P / P20-2 / P20-2S LCD monitor. The

monitor processes the data supplied to it by the screen controller. The screen controller or the

associated driver software is responsible for setting the modes (resolution and refresh rate).

When putting the monitor into operation for the first time, the screen display should be optimally

adapted to the screen controller used and adjusted in accordance with your needs (see the

"Changing the monitor settings" section in the "Operation of the monitor" chapter).

Target group

You don't need to be an "expert" to perform the operations described here. However, please observe

the safety information given in the operating instructions of the computer and in this manual.

In the event of any problems occurring, please contact your sales outlet or our help desk.

Additional information

Details of how you set the resolution and refresh rate are provided in the documentation on your

screen controller/the associated driver software.

For ergonomical reasons, we recommend a screen resolution of 1280 x 1024 when using the

SCENICVIEW P17-2 and P19-2 / P19-2P monitors. For the SCENICVIEW P20-2 / P20-2S monitor, a

screen resolution of 1600 x 1200 is recommended.

Because of the technology used (active matrix) an LCD monitor provides a totally flicker-free picture

even with a refresh rate of 60 Hz.

SCENICVIEW P17-2 / P19-2 / P19-2P / P20-2 / P20-2S

2 A26361-K983-Z120-1-7619, edition 6

Notational conventions

The meanings of the symbols and fonts used in this manual are as follows:

Pay particular attention to text marked with this symbol. Failure to observe this warning

endangers your life, destroys the device, or may lead to loss of data.

Supplementary information, remarks, and tips follow this symbol.

►Text which follows this symbol describes activities that must be performed in the order shown.

"Quotation marks" indicate names of chapters or terms.

This font indicates filenames and menu items.

This font indicates screen outputs.

Important notes

In this chapter you will find information regarding safety which is essential to take note of

with your monitor.

Safety notes

This device complies with the relevant safety regulations for data processing equipment, including

electronic office machines for use in an office environment. If you have any questions, contact your

sales outlet or our help desk.

●The display surface of the LCD monitor is sensitive to pressure and scratches. You should

therefore be careful with the display surface so as to avoid lasting damage (scratches).

●If the device is brought into the installation site from a cold environment, condensation can

form. Before operating the device, wait until it is absolutely dry and has reached approximately

the same temperature as the installation site.

●During installing and operating the device, please observe the instructions on environmental

conditions in the "Technical data" chapter as well as the instructions in the "Installing an

ergonomic video workstation" chapter.

Otros manuales para Fujitsu Siemens SCENICVIEW P17-2

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Monitor de Fujitsu Siemens Computers

Fujitsu Siemens Computers

Fujitsu Siemens Computers SCENICVIEW B17-3 Manual de usuario

Fujitsu Siemens Computers

Fujitsu Siemens Computers SCALEOVIEW L19-1W Manual de usuario

Fujitsu Siemens Computers

Fujitsu Siemens Computers 383V FA Manual de usuario

Fujitsu Siemens Computers

Fujitsu Siemens Computers SCENICVIEW B15-1A Manual de usuario

Fujitsu Siemens Computers

Fujitsu Siemens Computers MCM 17P2 Manual de usuario

Fujitsu Siemens Computers

Fujitsu Siemens Computers SCALEOVIEW Q22W-1 Manual de usuario

Fujitsu Siemens Computers

Fujitsu Siemens Computers B19-2 Manual de usuario

Fujitsu Siemens Computers

Fujitsu Siemens Computers 4612 FA Manual de usuario

Fujitsu Siemens Computers

Fujitsu Siemens Computers SCALEOVIEW S17-2 Manual de usuario

Fujitsu Siemens Computers

Fujitsu Siemens Computers SCENICVIEW A17-2A Manual de usuario

Fujitsu Siemens Computers

Fujitsu Siemens Computers 3815 FA Manual de usuario

Fujitsu Siemens Computers

Fujitsu Siemens Computers B15-1 Manual de usuario

Fujitsu Siemens Computers

Fujitsu Siemens Computers SCALEOVIEW L17-6 Manual de usuario

Fujitsu Siemens Computers

Fujitsu Siemens Computers SCALEOVIEW L17-2 Manual de usuario

Fujitsu Siemens Computers

Fujitsu Siemens Computers C384FA-M Manual de usuario

Fujitsu Siemens Computers

Fujitsu Siemens Computers 19T2 Manual de usuario

Fujitsu Siemens Computers

Fujitsu Siemens Computers 172E Manual de usuario

Fujitsu Siemens Computers

Fujitsu Siemens Computers FSC B15-1A Manual de usuario

Fujitsu Siemens Computers

Fujitsu Siemens Computers SCENICVIEW A20W-3 Manual de usuario

Fujitsu Siemens Computers

Fujitsu Siemens Computers L24W-4 Manual de usuario

Fujitsu Siemens Computers

Fujitsu Siemens Computers SCENICVIEW A17-2 Manual de usuario

Fujitsu Siemens Computers

Fujitsu Siemens Computers L19W-9 Manual de usuario

Fujitsu Siemens Computers

Fujitsu Siemens Computers 461V FA Manual de usuario

Fujitsu Siemens Computers

Fujitsu Siemens Computers SCENICVIEW A17-3A Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación