Fuji Electric NRF5 Series Manual de usuario

WTA541252 1/39

User’s manual

Setting Device

for

NRF5 series

Version 1.01

Fuji Electric Co., Ltd.

WTA541252 2/39

Introduction

This User’s Manual is organized to provide a brief description of setting device for electronic personal

dosimeter NRF5 series (NRF50, NRF51 and NRF54). If there are some requirements or improvements

about this setting device, please contact Fuji Electric representative.

Also, in the event of any malfunctions or other problems, contact Fuji Electric representative immediately.

Safety Precaution

Do not use, if smoke, unusual odor or abnormal noise exists.

Do not plug into the outlet that is not designated.

Do not use power cable other than provided.

Do not disassemble, repair or alter the Dosimeter Setting Device.

Attention

Use dosimeter with power ON.

Data may be lost, if dosimeter is turned OFF during use.

WTA541252              3/39 
 
Contents
1. OVERVIEW ······················································································4
1．1Overview························································································ 4
1．2Sample unit package ········································································ 4
2. SPECIFICATION·················································································5
2．1Basic specification············································································ 5
2．2Required environment ······································································· 5
3. DEVICE STRUCTURE ··········································································6
3．1USB cable ······················································································ 6
3．2IR setting device ·············································································· 6
4. DESCRIPTIONS AND SETTING-UPS ··························································7
4．1System configuration ········································································ 7
4．2Configuration software ······································································ 8
4．3Setting up······················································································· 9
5. OPERATIONAL INSTRUCTION·······························································10 
5．1Start the configuration software ··························································10 
5．2Screen interface ·············································································12 
5．3Main menu ····················································································13 
5．4EPD settings ··················································································14 
5．5Alarm settings ················································································16 
5．6Calibration ·····················································································18 
5．7Maintenance settings ·······································································20 
5．8Read out EPD data ·········································································23 
5．9Operating mode setting ····································································25 
5．10 EPD No.························································································27 
5．11 Read out trend data·········································································28 
5．12 Reset EPD data ··············································································32 
5．13 WiFi setting····················································································33 
5．14 Alarm management ·········································································35 
6. TROUBLESHOOTING·········································································38 
 

WTA541252 4/39

1. Overview

Overview

This setting device consists of hardware and software. It has a function of data communication

to dosimeter (Model: NRF50, NRF51 and NRF54) by infrared or USB to read setting values and

dose information from dosimeter, and a function of writing set value changed on the PC display.

Trend data read from dosimeter can be exported as a plain text.

Configuration software is designed to correspond with Microsoft® Windows® operating system.

Product package

(1) Configuration software installation CD 1

(2) User’s manual 1

(3) USB cable 1

Optional Accessories

(1) Infrared (IR) setting device

ACTiSYS Corporation ACT-IR224UN-LN96

WTA541252 5/39

2. Specification

Basic specification

Basic function :

1. Read setting values and dose information from dosimeter

2. Write setting values into dosimeter

3. Display a table of trend data

Peer :Electronic Personal Dosimeter (NRF50, NRF51 and NRF54)

Temperatures : 0 to 40 °C

Humidity :30 to 85 %RH

Required environment

The following hardware and software are required.

(1) Hardware

One set of PC/AT compatible platform and peripheral (hereinafter, PC) that meet the

following specifications

・CPU :Pentium 1GHz, or greater

・Memory :1G Byte, or greater

・Hard Drive :Free disc space of 20 MB, or greater

・Display :Resolution 1024 × 768, or greater

・Communications Interface :USB2.0 × 1 ch

・Others :Mouse and keyboard

(2) Software

The PC mentioned in (1) should have the following software installed.

・Operating System :Windows® 8.1, 10 (32/64bit)

Notes)

* Microsoft®, Windows®, Windows logo®, Windows Start logo® are either registered trademarks or

trademarks of Microsoft Corporation in the United States and/or other countries.

* Screen shot(s) reprinted with permission from Microsoft Corporation.

WTA541252 6/39

3. Device structure

USB cable

Structure of USB cable is shown below

Fig. 3-1 USB cable

IR setting device (optional)

Structure of IR setting device is shown below

Fig. 3-2 IR setting device

Parts

Description

USB connector

Connect to USB port of PC

IR head

Powered from USB port of PC. Other power supply

is not necessary.

IR head

USB connector

NRF5X side

PC side

USB(micro-B) Male

USB(A) Male

Attention

There is a possibility USB cable other than the suppried cable won’t fit in

the port on dosimeter.

USB cable may be easily pulled depending on the shape of micro-B plug.

WTA541252 7/39

4. Descriptions and setting-ups

System configuration

Configuration software is used in the following configuration.

Fig. 4-1 System configuration

USB cable

* While connecting USB, IR device does not work.

USB

IR setting device (optional)

IrDA1.0

* IR reception is located at lower left on the back of dosimeter.

USB

WTA541252 8/39

Configuration software

Functions overview of configuration software is shown below:

Note) EPD stands for electronic personal dosimeter.

* WiFi version only.

Screen Flow

Startup Window

Main Menu

Alarm settings

Calibration

Maintenance settings

Read out EPD data

Operating mode setting

Read out trend data

Reset EPD data

Display a version of this software.

Select a serial port to be used.

Main Menu

Read or write overall configurations such as

time alarm and interval of trend data.

See 5.4 EPD settings

Set alarm threshold of accumulated dose and

dose rate.

See 5.5 Alarm settings

Set calibration factor with direct input.

See 5.6 Calibration

Read or write maintenance settings such as

functions ON/OFF.

See 5.7 Maintenance settings

Select operating mode.

See 5.9 Operating mode setting

Display trend data.

See 5.11 Read out trend data

Reset operation time and accumulated dose.

See 5.12 Reset EPD data

Overview of the feature

Display measurement data.

See 5.8 Read out EPD data

WiFi setting

Set WiFi setting. *

See 5.13 WiFi setting

EPD No.

Set EPD number.

See 5.10 EPD No.

EPD settings

Alarm management

Set alarm action such as alarm pattern.

See 5.14 Alarm management

WTA541252 9/39

Setting up

Setup the hardware first, then the software.

[USB driver setups]

Install by downloading CP210x USB to UART Bridge VCP Drivers from the following URL.

https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers

[IR setting device driver setups] (Optional)

Installer is automatically launched, when CD attached in IR setting device

is inserted. If not launched automatically, perform the following file.

driver¥ACT-IR224UN-DriverInstaller_************.exe

[Software setups]

(1) Insert the setting software installation CD in the CD-ROM drive on PC.

(2) Launch ”Setup.exe” file.

(3) Install according to the instructions.

WTA541252 10/39

5. Operational instruction

Start the configuration software

(1) Connect dosimeter to computer and turn on the dosimeter.

(2) Double-click the icon

Fig. 5- 1 Icon of configuration software

(3) Configuration software is launched, then, the startup window will be indicated.

Fig. 5- 2 Startup window

Attention

For IR(USB) COM port number, serial port number is assigned following

serial port number on your PC (COM*) (e.g. : from COM4)

Tabla de contenidos

Otros manuales de Instrumento de medición de Fuji Electric

Fuji Electric

Fuji Electric ZRE-2 Manual de usuario

Fuji Electric

Fuji Electric NRF50 Manual de usuario

Fuji Electric

Fuji Electric ZPAF Manual de usuario

Fuji Electric

Fuji Electric ZPB Manual de usuario

Fuji Electric

Fuji Electric FCX-AII-V5 series Instrucciones de funcionamiento

Fuji Electric

Fuji Electric ZAF Manual de usuario

Fuji Electric

Fuji Electric ZKME Manual de usuario

Fuji Electric

Fuji Electric ZRF Manual de usuario

Fuji Electric

Fuji Electric ZFK8 Series Manual de usuario

Fuji Electric

Fuji Electric FWD Series Manual de usuario

Fuji Electric

Fuji Electric Time Delta-C FSV-2 Manual de usuario

Fuji Electric

Fuji Electric ZPA Manual de usuario

Fuji Electric

Fuji Electric ZKJ-2 Manual de usuario

Fuji Electric

Fuji Electric ZPA Manual de usuario

Fuji Electric

Fuji Electric ZSVS-2 Manual de usuario

Fuji Electric

Fuji Electric portaflow X Manual de usuario

Fuji Electric

Fuji Electric FLD-1 Manual de usuario

Fuji Electric

Fuji Electric NRF31 Manual de usuario

Fuji Electric

Fuji Electric X Series Instrucciones de uso

Fuji Electric

Fuji Electric FSC-2 Manual de usuario

Fuji Electric

Fuji Electric ZSS-7 Manual de usuario

Fuji Electric

Fuji Electric ZKM Manual de usuario

Fuji Electric

Fuji Electric FLV Manual de usuario

Fuji Electric

Fuji Electric ZPAH Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario