FTE Maximal MAX S93 Manual de usuario
PAG. 2
rev 1.1
ENGLISH
SAFETY PRECAUTION
The lightning flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert the user
to “dangerous voltage”
and to prevent from a
risk of electric shock.
Warning:
To reduce the risk of electric shock,
don’t open the cabinet. Refer servicing
to qualified personnel only.
The exclamation point
within an equilateral
triangle is intended
to alert the user to
important operating and
maintenance (servicing).
Please read the manual carefully before installing the receiver.
Caution: Never open the device by yourself. Dangerously high voltages are present inside the unit. Refer
servicing to qualified staff only.
When installing the receiver, always unplug the receiver from the mains voltage.
Unplug the receiver from the mains in case of long periods without operating the receiver (for example,
during holidays!).
To prevent shock hazard, do not touch the power plug with wet hands.
Always unplug the receiver before cleaning it or working on the connections.
Do not install the receiver close to strong heat sources, and ensure a good aeration if you plan to install
the receiver in a small cabinet.
Before you start operating the receiver, make sure that the satellite antenna is properly built up, optimally
connected and aligned.
The correct place to install the receiver is, of course, near your TV set and any other A/V signal sources
(DVD, VCR, CD, game console, etc.).
Choose a stable support, in which you can easily lay the necessary connecting cables without stumbling-
danger.
The receiver should be installed near an easily accessible outlet.
Do not install the receiver in a place where it can be reached by liquid spills.
Do not put any heavy objects as, for example, a TV-device over the receiver; the receiver could be
damaged.
DO NOT INSTALL THE RECEIVER:
- On an unstable surface
- Subject to direct sunlight
- In high humidity environment
- Outside the receiver’s temperature range (+5°...+40°C)
If the receiver is subject to severe temperature changes, it can suffer from water condensation inside.
Switch off the receiver in these cases for at least 2 hours before resuming operation.
PAG. 3
rev 1.1
ENGLISH
QUICK INSTALLATION GUIDE
QUICK INSTALLATION GUIDE
FOLLOW NEXT STEPS FOR THE CORRECT INSTALLATION OF THIS RECEIVER.
STEP 1: CONNECTIONS
The coaxial cable, with satellite signal, must be connected to the “IF IN” connector. The “TV SCART”
connector must be connected to the TV set.
Depending on the type of installation, the receiver should be connected and configured following next
examples.
Example 3 – Combined with terrestrial Example 4 – Motorized system
Example 1 – Basic System Example 2 – DISEqC switches
NOTE: This user’s guide is adapted to software version 1.72B4 dated 24/03/2010.
For future software updates, please visit our website.
In order to download the complete user’s guide and get more information about receivers,
please visit the website http://receivers.ftemaximal.com
PAG. 4
rev 1.1
ENGLISH
STEP 2: BASIC CONFIGURATION OF THE
RECEIVER
The receiver includes an installation assistant (Quick Setup)
that will help you to setup the different parameters.
When the receiver is turned on at first time (using the button at
the rear panel of the receiver), the next menu is shown on the
TV (IMAGE 1):
The receiver is programmed with all the channels of Astra (at
position 1 of the DISEqC), Hotbird (at position 2 of the DISEqC),
Hispasat (at position 3 of the DISEqC) and Turksat (at position
4 of the DISEqC). If your installation is different to this case,
please follow installation steps to search the channels.
In order to move through the different options of this menu, please
use the keys [ ] and [ ] of your remote control. If a
“Short circuit on the LNB” message is shown on the TV, please
check the connections before continuing the installation.
Language
: Press [ ] to select languages. The selection of
languages include: English, German, French, Spanish, Italian,
Portuguese, Turkish, Polish, Russian, Arabic, Farsi.
First Audio
: Some channels offer more than one audio language.
This function allows you to set the preferred audio language for
those channels using [ ]. If a channel offers the same
audio language as the “First Audio” you set the system will play
this audio language as default. If the channel does not offer
this audio language then the system will compare the offered
languages with the second audio language. The selections of
audio languages include: English, German, French, Spanish,
Italian, Portuguese, Turkish, Polish, Russian, Arabic, Farsi.
Second Audio
: If the channel has no audio language that
corresponds with “First Audio” but with “Second Audio” the
system will play the second audio language as default. If no
audio language corresponds with the “Second Audio” then the
default language of the current channel will be played instead.
The selections of audio languages include: English, German,
French, Spanish, Italian, Portuguese, Turkish, Polish, Russian,
Arabic, Farsi.
Subtitle Language
: Press [ ] to select subtitle languages.
The selection of languages include: English, German, French,
Spanish, Italian, Portuguese, Turkish, Polish, Russian, Arabic,
Farsi.
QUICK INSTALLATION GUIDE
IMAGE 1
IMAGE 2
PAG. 5
rev 1.1
ENGLISH
LNB Power
: Here you can set the power output to the LNB. If
your receiver is connected to the LNB directly then you need
to set the LNB Power to “On”. If your receiver is connected
to a multi switch (SMATV signal distribution system) then it
may be that you don’t need to provide the power to the LNB
(IMAGE 2). But since this is depending on the kind of installed
distribution system we recommend you to contact your installer
or to refer to the user manual of this system to get the correct
information.
Press [ ] to switch between “On” /”Off”.
Satellite List
When you enter the “Satellite List” menu you can see a window
like the one beside (IMAGE 3):
1. Move through the satellite list using [ ] and mark/
unmark the satellites that you want pressing [OK]
2. Press [Red] button to enter edit satellite menu. You can edit
the satellite’s name and its longitude. Once you have edited the
satellite, select “Save” option and confirm with [Yellow] button.
If you prefer to exit without saving the changes press [Blue]
button.
3. Press [Green] button to open the “Add satellite” window.
You can edit the satellite’s name and its longitude. Once you
have edited the satellite, select “Save” option and confirm with
[Yellow] button. If you prefer to exit without saving the changes
press [Blue] button.
4. After pressing [Blue] button you will be asked “Are you sure
to delete?”. Select “Yes” to delete the marked satellite. Select
“No” to cancel the operation.
Press [Exit] to save the changes and go to the previous window
to continue configuring the antenna.
Single search
: You can edit the following items (IMAGE4):
1. Satellite: Press [ ] to switch Satellites or press [OK] to
enter satellite list to select directly.
2. In the “FTA Only” item, press [ to select to scan only
free channels or even scrambled channels. If you select “Yes” it
will scan free channels only.
3. In “Scan Channel” item, press [ ] to select to scan TV
+ Radio Channels, or just TV channels or just Radio channels.
4. Network Search: If you select this option as “Off”, the receiver
will search the selected Satellite. In case you select “On”, the
NIT (Network Identification) will be identified and the receiver
will automatically search all the TP of this network.
5. In “Scan Mode” item you can select “Auto Scan” to blind
scan or “Preset Scan” to scan all preset transponders.
6. Move the highlight to “Search” and press [OK] button to
start scanning. Bars are showing the progress of the channel
scanning in the lower part of the window and the found channels
QUICK INSTALLATION GUIDE
IMAGE 3
IMAGE 4
PAG. 6
rev 1.1
ENGLISH
are listed. You can stop the scan with [Exit] and save the so far
found channels (IMAGE 5).
Multi search
: Entering in this menu, you can make a search in all
the satellites of the list configured in the “Satellites list” option.
The configuration options are the same as in the individual
search section.
IMAGE 5
QUICK INSTALLATION GUIDE
PAG. 7
rev 1.1
ENGLISH
TV Channel List: This option shows the list of TV stored channels.
Radio Channel List: This option shows the list of Radio stored channels.
Delete All: This option deletes all TV and Radio stored channels.
QUICK INSTALLATION GUIDE
Antenna connexion: It allows choosing the type of installed antenna, between fixed or
motorized.
Satellite List: This option shows all the stored satellites. This list can be modified.
Antenna Setup: It allows configuring all the installation options of the antenna.
Single Search: Once the antenna is configured, this option allows search for the channels
of one satellite.
Multi Search: Once the antenna is configured, this option allows search for the channels
of various satellites.
TP List: This option shows all the stored TP. This list can be modified. Once the antenna
is configured, this option allows search for the channels of one TP.
Channel
Installation
PAG. 8
rev 1.1
ENGLISH
Language: This option allows choosing the language of the menus.
TV System: This option allows choosing the video Standard and other parameters of
the screen.
Local Time Setting: Time setting menu.
Timer: It allows activating/deactivating and configuring timers.
Parental Lock: In this option, user can lock the access to the menu and change the
password of the receiver.
OSD Setting: This option allows configuring the subtitles of the channel information.
Favorite: It allows changing the name of the favourite groups.
Other: It allows configuring other additional parameters, such as LNB feeding or
automatic switch off.
QUICK INSTALLATION GUIDE
Information: Shows all the receiver’s information.
Factory Default: This option resets the receiver and loads the factory default values.
SatcoDX Auto programming: To load SatcoDX channel lists.
SW Upgrade by OTA
System Configuration
Accesories
Games
Tetris
Othello.
PAG. 9
rev 1.1
ENGLISH
1. Panel & Remote Control Description
1.1. Front Panel Description…….......................................…………………………11
1.2. Rear Panel Description……................................………….…………………..11
1.3. Remote Control Description…...............................................…………………………..12
2. Basic Operations
2.1. Standby ……………………..............................................…………………………………...13
2.2. TTX …………..................................................……………………………………..13
2.3. Mute……………............................................………………………………………..13
2.4. Channel Number…………...........................……………………………………………………13
2.5. Multi-Pictures……............................……………………………………………………………14
2.6. PR + / PR -…...............................................…………………….…………………………..14
2.7. TV/RADIO…………........................…………………………………………………….14
2.8. Vol+/Vol-…......................................……………………………………………………….14
2.9. Exit….................................……………………………………………………..14
2.10. Menu……………………...................................…………………………………..14
2.11. Recall…..............................................………………………………………...14
2.12. Channel List…………………….........................…………………………………...14
2.13. EPG…………………...............................…………………………………………...15
2.14. Find………………................................…………………………………………………15
2.15. Favourites………....................................………………………………………………...15
2.16. Audio Track / Mode…...........................……………………………………………….15
2.17. Information……..................................…………………………………………...16
2.18. SAT…..................................……………………………………………….16
2.19. ZOOM............……………………………………………………………………...16
2.20. Sleep.............……………………………………………………………………...16
2.21. LNB Short….............…………………………………………………………………...16
3. Channel
3.1. TV Channel List…………....................……………………………………………..17
3.1.1. Favourite………...............................………………………………….……………17
3.1.2. Move.……………..............................………… …………………………….…………17
3.1.3. Edit Channel.........................…………………………………………….18
3.1.3.1 Sort...............…........................................…………….…...18
3.1.3.2 Delete….......................…………………………………..…………..18
3.1.3.3 Edit..….................................………………………… …….……….18
3.1.4 Skip............................................…………………...………………………...18
3.1.5. Lock......................................………………………… …………………….………..18
3.2. Radio Channel List……..................................……………………………………......19
3.3 Delete All…....................…...............……………………………………………….19
INDEX
PAG. 10
rev 1.1
ENGLISH
4. Installation
4.1. Antenna Connection……......................……………………..…………………..20
4.2. Satellite List………….............................………………………...………………...20
4.3. Antenna Setup.........……......................……………………..…………………..21
4.4. Single Search………........…......................……………………..…………………..21
4.5. Multi Search………...........................…………...………..…………………….22
4.6. TP List……………..........................………………………..………………...22
5. System Setup
5.1. Language………………….............………………………...…………………...24
5.2. TV System……………..............…………………………..…………………...25
5.3. Local Time Setting ………....................………………………...………………25
5.4. Timer Setting....................................................................................25
5.5. Parental Lock……………………............................…………………………….26
5.6. OSD Setting………………………..............................……………………………..26
5.7. Favorite..........………………………………….....................……………………..27
5.8. Other................………………………………….....................……………………..27
5.8.1. LNB Power..........................................................................................27
5.8.2. Channel Play Type...................................................................................27
5.8.3. Channel Change.........................................................................................27
5.8.4. Beeper.........................................................................................28
5.9. Auto Standby................………………………………….....................……………………..28
6. Tools
6.1. Information…………………………...................................………………………….29
6.2. Factory Setting………………………………………..………………..............................29
6.3. SatcoDX Auto Programming……........…………………...................................29
6.4. Software upgrade by OTA…………………......................……………………...30
7. Game
7.1. Tetris...................................................................................................................31
7.2. Othello..................................................................................................................31
8. Technical Specification……………………………………........................................32
9. Conformity declaration……………………………………........................................33
INDEX
PAG. 11
rev 1.1
ENGLISH
PANEL & REMOTE CONTROL DESCRIPTION
1. PANEL & REMOTE CONTROL DESCRIPTION
1.1. FRONT PANEL DESCRIPTION
1. IR-SENSOR: Reception sensor for the IR remote control signals.
2. DISPLAY: 4 Digits to display the program numbers.
3. STAND BY LED: Shows the state of the receiver.
4. LOCK LED: Indicates a sufficient signal level at the IF IN input.
5. BUTTONS: These buttons allow controlling some functions of the receiver.
1.2. REAR PANEL DESCRIPTION
1. RS-232: Serial Port allowing software upgrades.
2. AC IN: Mains input cable.
3. IF IN: Satellite input.
4. TV SCART: Output SCART for the connection to a TV set.
1 2 35
4
12
34
Tabla de contenidos
Otros manuales de Receptor de FTE Maximal
FTE Maximal
FTE Maximal DVB 310 S Manual de usuario
FTE Maximal
FTE Maximal MAX T200 HD Manual de usuario
FTE Maximal
FTE Maximal MAX T115+ Manual de usuario
FTE Maximal
FTE Maximal MAX S122 Manual de usuario
FTE Maximal
FTE Maximal MAX S302CI Manual de usuario
FTE Maximal
FTE Maximal PVR T150 Manual de usuario
FTE Maximal
FTE Maximal MAX S101 HDMI Manual de usuario
FTE Maximal
FTE Maximal MULTILINK R LT Manual de usuario
FTE Maximal
FTE Maximal MAX S123 HD Manual de usuario
FTE Maximal
FTE Maximal MAX T220 HD Manual de usuario
