FSR DV-HDSS-41-TX Manual de usuario

User Manual

DV-HDSS-41-TX

4x1 4K Scaling Presentation Switcher with Dual Outputs

NOTE: See FSR LIT1628 API manual for serial commands.

43153 LIT1627

Important Safety Instructions

Table of Contents

Important Safety Instructions

Overview

Features

Package Contents

Panel Description

Dipswitch Setting

Scaler Setting

HDBaseT Cable Distances & Resolutions:

Connection and Installation

Switch and Lamp Connection Diagram

Typical

Functional Block Diagram

Audio Hookup

Dimensions

Operation

Input Select

CEC Display Control

Audio Controls

API Control

Specifications

Limited Warranty

Contact Information:

Introduction

Overview

The FSR DV-HDSS-41-TX is an advanced four-input, multi-format converter,

switcher, scaler and extender with built in 4K UHD scaling, in a compact 1RU

half-rack enclosure. It offers two HDMI inputs, one DisplayPort input and one

VGA input with Stereo Audio; Scaled HDMI with EDID controlled HDBaseT

mirrored output to allow signal extension over CatX cable to reach a remote

display, or additional HDBaseT signal management system. Additionally, one

balanced stereo audio de-embedded output generated from the scaled HDMI

video output.

It supports four control options, two auto switching options, push buttons on

the front panel, contact closures with lamp feedback and API. It also has

built-in CEC control that can automatically turn a CEC enabled display

on/standby by auto-detecting input signal status. The built in 4k@30Hz scaler

on the HDMI output is controlled by a rotary switch that allows seamless

switching without black to enhance presentations by eliminating distractions

during switching.

It simplifies classroom and small office system integration, for installation

beneath conference tables and in lecterns, to provide localized presentation

switching support.

Features

1xVGA+Stereo Audio, 1 x DisplayPort and 2x HDMI inputs, HDMI and

HDBaseT mirrored outputs

HDMI and DP input up to 4k UHD, 2160P (3840x2160) @30Hz and

HDCP 1.4, VGA input up to 1920x1200@60Hz

HDMI out with 4K@30Hz scaler built in and de-embedded balanced

stereo audio out

HDBaseT mirrored out, supports PoH with PSE module to power remote

FSR 100 Meter HDBaseT receiver

HDMI out supports seamless and fast switching within 2-3 seconds, the

last frame frozen without black

Auto-switching to the latest input, when detecting any input connected or

disconnected

CEC controller built in to turn a display on/off by auto-detecting the inputs

status, with delay adjustment

Push buttons and Contact Closures provided to switch sources or turn

display on/standby manually

DIP switch provided to adjust automatic or manual operation mode

Rotary switch provided to adjust auto-scaler or fixed resolutions out

Provides RS232, and front panel buttons to control the device

Provides the complete API commands to the third party control system

for integration

DC 12V 3A adapter universal power supply

Package Contents

1 x DV-HDSS-41-TX Switcher

1 x power adapter (DC 12V 3A)

1 x AC cable with US standard

3 x Phoenix Male Connector (3.81 mm, 3 pins)

3 x Phoenix Male Connector (3.81 mm, 5 pins)

1 x Mounting Brackets (Pair)

Panel Description

Front Panel

No.

Name

Description

VGA IN

Connects to VGAsource device

AUDIO IN

Stereo audio (embedded with VGA inputs)

DP IN

Connects to DisplayPort source device

HDMI IN

Connects to HDMI source device.

SOURCE Selection

Button and LEDs

Selection button: press the button to select

the desired input.

LED: The selected source LED lights.

DISPLAY Selection

Button

On: Turn on the TV via CEC

Off: Turn off the TV via CEC

Note: Used for TV that support CEC

4 Pin DIP SET

Dipswitch for setting options

SCALER

Switch to desired scaler setting.

Read on power up and hot plug only.

Back Panel

No.

Name

Description

ETHERNET

LAN to/from HDBaseT Receiver

RS232 Pass

Through

Connects to a RS232 controller or RS232

controllable device to pass through RS232

commands to HDBaseT Receiver

HDBT OUT Port

Connects to a HDBaseT Receiver

HDMI OUT Port

Connects to HDMI display device

AUDIO OUT

Ports

Connects to audio output device such as an

amplifier, powered speakers for HDMI audio

de-embedding output

CONTACT IN

Ports

Connects to a push buttons for input source

switching

No.1: Press this button to select VGA IN

No.2: Press this button to select DP IN

No.3: Press this button to select HDMI1 IN

No.4: Press this button to select HDMI2 IN

G: Connects to Ground (>1mA but <5 mA)

No.

Name

Description

TALLY OUT

Ports

Connects to LEDs on the keypad to indicate the

selected source

No.1: LED for VGA input

No.2: LED for DP input

No.3: LED for HDMI1 input

No.4: LED for HDMI2 input

G: Connects to Ground (<100 mA)

DISPLAY

Connects to keypad to output CEC power

commands

Note: The display devices must support CEC and

must be enabled

RS232

CONTROL

Connects to a PC or a third-party control system to

control this device via API commands

Power Input

DC 12V 3A power input.

Dipswitch Setting

4 Pin DIP switch

DIP Position

Function

Switch 1

Audio

De-embedded

UP:Audio out de-embedded from HDMI

output (Default)

DOWN: Reserved

Switch 2

Source Switch

Mode

UP:Enable Auto-Switch with Manual

Override Control (Default)

DOWN: Manual Switch only

Switch 3

CEC Control

UP:Enable Auto-CEC Control with Manual

CEC Override Control (Default)

DOWN: Manual CEC Control only

Switch 4

Control Mode

UP:Enable API control and manual control

(Default)

DOWN: Manual Control only

Scaler Setting

HDMI scaler output support. Note

Position

Functions

Scaler Set to Automatic Mode (default)

Fixed 1024 x 768@60Hz as native video

Fixed 1280 x 720@60Hz as native video

Fixed 1280 x 800@60Hz as native video

Fixed 1366 x 768@60Hz as native video

Fixed 1600 x 1200@60Hz as native video

Fixed 1920 x 1080@60Hz as native video

Fixed 1920 x 1200@60Hz as native video

Fixed 3840 x 2160@30Hz as native video

API Control

HDBaseT Cable Distances & Resolutions:

CAT-5e / CAT-6:

100 Meters: 1080p @60 Hz (36 BPP [bits per pixel])

70 Meters: 1080p @60 Hz (48 BPP [bits per pixel]), 3D, 4K UHD / 2160p

3840 x 2160) @ 30Hz. (4:2:0 8-bit)

CAT-6A / CAT-7 (Shielded):

100 Meters: 1080p @60 Hz (48 BPP [bits per pixel]), 3D, 4K UHD / 2160p

(3840 x 2160) @ 30Hz. (4:2:0 8-bit)

Tabla de contenidos

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario