Froling S3 Turbo Manual de usuario

S3 Turbo

Firewood boiler

S3 Turbo

www.froeling.com

AVAILABLE WITH

BROADBAND LAMBDA PROBE

AND SERVO-MOTORS

For more than 50 years Froling has specialised in the efcient use of wood as

a source of energy. Today the name Froling stands for modern biomass

heating technology. Froling rewood, wood chip and pellet boilers

are successfully in operation all over Europe. All of our

products are manufactured in our factories in Austria

and Germany. Our extensive service network

guarantees full coverage and reliability.

From a renowned company

S3 Turbo: Top-quality boiler technology

at a mid-range price

The S3 Turbo rewood boiler focuses on the basics. It includes

many features that you would normally only nd in high-end

rewood boilers.

• Patented, cylindrical high-temperature turbulence combustion

chamber for excellent combustion values.

• Separate pre-heating chamber door for easy pre-heating.

• Carbonisation gas extraction system for smoke-free reloading.

• Speed-regulated induced draught fan for output control and

full operating safety.

S3 Turbo

www.froeling.com

The rewood boiler with special benets:

Speed-regulated induced draught fan for maximum ease of use.

WOS (efciency optimisation system) for high efciency and easy cleaning.

Top quality thermal insulation.

Manual adjusters (or actuators with Lambdatronic) for primary and secondary air.

Large maintenance openings for easy cleaning.

S-Tronic controller or Lambdatronic controller

Carbonisation gas extraction system prevents ue gas from escaping during reloading.

Aprons (hot cladding) to protect the inner wall of the boiler for a longer service life.

Large fuel loading chamber for half-metre logs ensures long reloading intervals.

Separate pre-heating chamber door for easy pre-heating.

Patented high-temperature turbulence combustion chamber ensures low emissions.

A successful design

Feature: Large fuel loading chamber for

half-metre logs

Advantages: • Easy front-loading

• Long combustion time

• Long reloading intervals

The S3 Turbo can be loaded with half-metre rewood

easily from the front. The loading chamber is 55 cm deep

and has a generous reserve of space. Often it is only

necessary to ll the boiler once a day. Strong steel guards

protect the loading chamber and keep it clean.

Feature: WOS system

Advantages: • Even greater efciency

• Easy cleaning from outside

• Fuel savings

The WOS (efciency optimisation system) consists

of special turbulators, which are placed in the heat

exchanger pipes. The lever arm mechanism ensures

easy cleaning of the heating surfaces from outside.

An additional benet: clean heating surfaces lower

energy consumption.

Feature: High-temperature turbulence

combustion chamber

Advantages: • Excellent combustion values

• Low emissions

• Much more environmentally friendly

Froling uses the patented, cylindrical high-temperature

turbulence combustion chamber in the S3 Turbo. This

means the boiler delivers excellent combustion values. The

generous dimensions of the combustion zone guarantee

low emissions. So by using a Froling S3 Turbo you are

helping to keeping our air clean.

S3 Turbo

www.froeling.com

Feature: Special carbonisation gas extraction

system

Advantages: • No ue gas escapes during reloading

• The boiler room stays clean

The special carbonisation gas extraction system also

prevents any gas from escaping when relling. This is

applicable at every stage of combustion. Enjoy modern

heating with wood!

Feature: Speed-regulated induced draught

fan

Advantages: • Easy to operate

• Adapts to all operating conditions

• Full operating safety

The primary and secondary air settings are adjusted

by the technician during commissioning. The function-

monitored induced draught fan enables the system

to adjust to different operating conditions. This offers

excellent output adjustment with full operating safety. In

the S3 Turbo with broadband lambda probe the primary

and secondary air settings are adjusted by means of

servo-motors, ensuring that output is adapted to given

requirements at every stage of combustion.

Systematic convenience

Feature: S-Tronic control

Advantages: • Speed regulation and function

monitoring of the induced

draught fan for output

adjustment

• Integrated storage tank

management

• Alternating display of boiler,

ue gas and storage tank

temperatures

Feature: S-Tronic plus control

Advantages: • Speed regulation and function

monitoring of the induced

draught fan for output

adjustment

• Integrated storage tank

management

• Visual display with control keys

for setting

• Can be used to control 2 mixed

heating circuits

• Integrated boiler management

Feature: Lambdatronic control

Advantages: • Speed regulation and function

monitoring of the induced

draught fan for output

adjustment

• Lambda control with broadband

lambda probe

• Control of primary and

secondary air via 2 servo-

motors

• Integrated storage tank

management

• Visual display with control keys

for setting

• Can be used to control 2 mixed

heating circuits

• Integrated boiler management

Option: Froling FRA room

temperature sensor /

RBG 3200/RGB 3200 Touch

room console

The main modes of the designated heating cir-

cuit can be easily adjusted and selected using the

Froling FRA room temperature sensor. The

adjusting wheel allows you to change the room

temperature by up to ± 3° C.

The RBG 3200/RGB 3200 Touch room

console makes the system even easier to use.

You can control the heating system easily from

your living room. The important system data is

clearly displayed and changes can be set at the

push of a button.

S3 Turbo

www.froeling.com

The Lambdatronic controllercontrols the induced draught fan and offers the option of connecting a

storage tank loading pump and a heating pump. Flue gas and boiler temperature monitoring ensures

efcient combustion.

S3 Turbo with S-Tronic and H2 hygienic layered tank S3 Turbo with Lambdatronic, layered tank and Unicell

NOTICE

National and regional

regulations requiring

the use of weather-

compensated controls

should be observed.

The Lambdatronic controllers allow for efcient energy management. Up to 4 storage tanks, up to 8

hot water tanks and up to 18 heating circuits can be integrated into the heating management system.

You also benet from the ability to integrate other means of energy production, such as solar panels.

Hot water

Balancing

valve

S3 Turbo with S-Tronic H2 Hygienic layered tank

Cold water

S3 Turbo with Lambdatronic Layered tank Unicell NT-S

water heater

Room sensor

(optional)

External

sensor

Balancing

valve

WEATHER-COMPENSATED

EXTERNAL HEATING CIRCUIT

CONTROL

pump assembly

Technical specications

Heizkessel- und Behälterbau GesmbH

A-4710 Grieskirchen, Industriestr. 12

AUT: Tel. +43 (0) 7248 606 • Fax +43 (0) 7248 606-600

G E R : T e l . + 4 9 ( 0 ) 8 9 9 2 7 9 2 6 - 0 • F a x + 4 9 ( 0 ) 8 9 9 2 7 9 2 6 - 2 1 9

Email: [email protected] • Internet: www.froeling.com

P0310516 - All illustrations intended as a guide only.

We reserve the right to make technical changes without prior notice. Errors and omissions excepted.

Source for third party images: www.aboutpixel.de

Dimensions - S3 Turbo 18 28 36 45

L Length of boiler [mm] 1160 1160 1250 1250

L1 Total length including induced draught fan [mm] 1260 1260 1350 1350

B Width of boiler [mm] 570 570 670 670

B1 Total width including side cleaning door [mm] 680 680 780 780

H Height of boiler [mm] 1470 1470 1570 1570

H1 Total height including ue gas pipe [mm] 1530 1530 1630 1630

H2 Height of ue pipe connection [mm] 1750 1750 1850 1850

H3 Flow connection [mm] 1280 1280 1380 1380

H4 Return connection [mm] 140 140 140 140

H5 Safety heat exchanger connection [mm] 890 890 970 970

Flue pipe diameter [mm] 150 150 150 150

Technical specications - S3 Turbo 18 28 36 45

Nominal output [kW] 22.5 31.0 36.0 45.0

Fuel loading chamber capacity [l] 140 140 210 210

Fuel loading door (width/height) [mm] 330 / 370 330 / 370 330 / 370 330 / 370

Water capacity [l] 120 120 190 190

Boiler weight [kg] 530 535 610 620

Your Froling partner:

Otros manuales para S3 Turbo

Tabla de contenidos

Otros manuales de Caldera de Froling

Froling

Froling Turbomatic TMC 70 Manual de usuario

Froling

Froling P4 Pellet 8-60 Manual de usuario

Froling

Froling PE1 Pellet Manual de usuario

Froling

Froling SP Dual 15-40 Manual de usuario

Froling

Froling T4 Series Manual de usuario

Froling

Froling P4 Pellet 8-60 Manual de usuario

Froling

Froling T4 24-150 Manual de usuario

Froling

Froling S3 Turbo Manual de usuario

Froling

Froling S3 Turbo Manual de usuario

Froling

Froling TX 250 Manual de usuario

Froling

Froling P1 Pellet Manual de usuario

Froling

Froling S1 Turbo Manual de usuario

Froling

Froling Lambdatronic P 3200 Manual de usuario

Froling

Froling TX 250 Manual de usuario

Froling

Froling S4 Turbo 15 Manual de usuario

Froling

Froling Turbomatic TMC 28-55 Manual de servicio

Froling

Froling PE1 Pellet Manual de usuario

Froling

Froling S1 Turbo Manual de usuario

Froling

Froling P4 Pellet 8 - 60 Manual de usuario

Froling

Froling FHG 20 Manual de usuario

Froling

Froling T4 24-150 Manual de usuario

Froling

Froling SP Dual compact Manual de usuario

Froling

Froling T4e 200 Manual de usuario

Froling

Froling T4 Series Manual de usuario

Manuales populares de Caldera de otras marcas

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Manual de usuario

Radijator

Radijator BIO max 23.1 Manual de usuario

Brunner

Brunner BSV 20 Manual de usuario

Buderus

Buderus Logamax GB062-24 KDE H V2 Manual de usuario

Potterton

Potterton 50e Hoja de datos

UTICA BOILERS

UTICA BOILERS TriFire Manual de usuario

Joannes

Joannes LADY Series Manual

ECR International

ECR International UB90-125 Manual de instrucciones

U.S. Boiler Company

U.S. Boiler Company K2 Manual de usuario

Henrad

Henrad C95 FF Manual de usuario

NeOvo

NeOvo EcoNox EF 36 Manual de usuario

Potterton

Potterton PROMAX SL 12 Manual de usuario

Eco Hometec

Eco Hometec EC 25 COMPACT Manual de usuario

Viessmann

Viessmann VITODENS 200 Guía

Baxi

Baxi Prime 1.24 Manual de usuario

REXNOVA

REXNOVA ISA 20 BITHERMAL Manual de usuario

Radiant

Radiant R2K 55 Manual

Worcester

Worcester Greenstar 36LXi Manual de usuario