Foscam D2EP Manual de usuario
FHD Security Camera
V1.0.9
305503000462
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
Dear customer,
The user manual for the product contains the product functions, method of use and
operating procedure. Read the user manual carefully to get the best experience and
avoid unnecessary damage. Keep the manual for future reference.
WARNING
Do not use the product in violation of local laws and regulations. A user who violates
local laws and ordinances will be held responsible for all consequences of purchasing
and using the product.
Alza.cz a.s. is not responsible for any violation of local laws and regulations by the user.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
3
Setting Up Your Foscam Security Camera
1. Getting Started
Package Contents
IP Camera Power Adapter
Ethernet Cable Quick Setup Guide
Security tips
•Please change the camera’s password regularly, using a combination of numbers,
letters and special characters.
•We recommended that you regularly update your camera with latest available
software and firmware to ensure the best experience with your camera.
2. Physical Description
LENS
Array LED
LAN
Audio In/Out
Power
Reset Button
4
3. Setting Up Your Camera: Wired Connection via Foscam
App
Before you get started
Scan the QR code below to download and install the Foscam APP:
To ensure a smoother video experience on your smart phone, it is recommended that
you smart phone meet the following specifications:
•iOS: version 8.1 or higher.
•Android: 4.1 or higher, using a device with Graphics Processing Unit (GPU)
NOTE: For the best experience, please update the APP to the latest version!
Wired Connection
1. Connect the camera to your router with an Ethernet cable.
2. Plug the power adapter into the camera, and then wait for about 1 minute.
3. Make sure your smart phone is connected to the same Wi-Fi network as the camera.
TIPS You need to connect the 2.4 GHz network Wi-Fi router is dual-band –most never
routers have both 2.4GHz and 5GHz channels. For example SSID: XXXXX_2.4G.
4. Open the foscam APP and please register a Foscam account, or sign in if you have one
already.
5
5. After logging into Foscam APP, select “Tap to add a camera” or “+” icon on the upper
right corner, then select “Scan the QR code” and scan the QR code that labeled at the
bottom of your camera.
Tap + icon select “Scan the code” Scan the QR code
which is located at the
bottom of your camera.
6. Wait for a few seconds and then you can set the camera name and tap “Save” IN “Set
name” interface.
Camera added successfully and
name has been set
NOTE: If the adding process fails, please reset your camera and try adding again
according to the above method.
Reset Button
6
7. Tapping on the play button in the video box will jump to the “Camera Login” setting
interface. For your security, please set a new username and password for your camera
before viewing live video.
Tap Set a new username
and password
8. After completing the above steps, you can begin using your camera.
4. Other ways to access your camera
•Foscam VMS
Foscam VMS is a new tool for PCs. It does not require plug-in and is compatible with
Windows & Mac, supporting all Foscam HD cameras and up to 36 cameras at the same
time. If you would like to manage multiple cameras, we suggest you install Foscam VMS.
You can download the “Foscam VMS” Windows version from foscam.com/vms, and can
download the “Foscam VMS” Mac version from the APP store:
https://apps.apple.com/cn/app/foscamvms/id1521202507?mt=12.
NOTE: For the best experience, please update Foscam VMS to the latest version!
Add the IP Camera
1. Run Foscam VMS, then create a local administrator account and login.
2. Tap the “+” icon on the Foscam VMS and follow the setup wizard to add your camera.
Please visit foscam.com/downloads to view the user manual and for additional detailed
steps.
7
•Foscam Cloud Service
You can access the camera via the Foscam Cloud website:
https://www.myfoscam.com
Some benefits of viewing your camera in the cloud:
•It is simple and convenient to remotely access and manage all your Wi-Fi security
cameras.
•Enjoy the latest features first through Foscam Cloud including cloud storage and
more.
•Getting started is fast –if you have already registered an account in the Foscam
App, you can directly use the same login credentials for Foscam Cloud.
5. Hardware Installation
1. Loosen the three screws on the cover of the device, and remove the cover.
2. Insert a micro SD into the SD card slot (optional; for local storage).
3. Install the mounting plate in the area to be monitored.
8
NOTE: Please drill a middle hole in the mounting plate if you want to wire the camera
through the top.
For the best visual, we suggest mounting the camera in a position that is at least 30cm
(11.8in) away from the left and right walls.
4. Install the base of the device on the desired using the included expansion screws.
Cement Wall Wooden Wall
9
5. Wiring
•Pass the wire out through the gap at the base, or through a drilled hole.
•Connect the camera to your LAN (Local Area Network of Internet router) via
Ethernet cable.
•Power on the device.
6. Turn the angle of the lens manually.
7. Finally, fasten the cover and the base together with screws.
NOTE: Do not block the Array LED when rotating the casing, so as to not affect the night
vision.
6. Important Notice
•Camera Username & Password
The camera username & password are used to access and manage your camera. Having
a strong can significantly improve the security of your camera.
If you have forgotten either of them, please press the “Reset” button and hold it for
more than 10 seconds while the camera is powered on. After release the button. The
camera will automatically reboot and the default settings will be restored.
You can then reconnect the camera by following this Quick Setup Guide.
•Foscam Cloud Service Account Username & Password
Your Foscam Cloud service account and password may be used to access both the
Foscam App and then Foscam Cloud service website. Therefore, you can register your
account username & password on either one.
10
•Storage Media
You camera supports cloud, NVR (Network Video Recorder), and Micro SD card (only
supports FAT-32 format) storage formats. If you wish to record and play back large
amounts of video, we recommend using a Foscam NVR device as well.
•Firmware Upgrade
You can upgrade the firmware of your camera with the Foscam App by using the new
“One-Key Online Upgrade” feature (Open the Foscam App and Login to the camera,
select Settings > Firmware Upgrade).
You also can download the latest version to upgrade your camera from our official
website foscam.com/upgrades.
•Safety Tips
Please ensure that the proper power supply is used before using the camera.
Please install the camera securely using the screw provided.
Please use this product within the temperature range. When the ambient temperature is
too high or too low, it may cause product failure.
To avoid the risk of fire or electric shock, please keep your camera connectors in a cool,
dry place.
Please keep the camera out of reach of small children.
This product is not a toy; children should use the product under adult supervision.
Change your default port to a greater range to help ensure the safety of your
connection. How to change the default port: please visit foscam.com/downloads to view
the user manual.
Check the logs of your Foscam cameras frequently. Foscam Cameras have embedded
logs reminding telling you which IP addresses are accessing the camera.
The cords on this product are a potential strangulation hazard For child safety, please
keep these cords out of the reach of children.
Otros manuales para D2EP
1
Tabla de contenidos
Idiomas:
Otros manuales de Cámara de seguridad de Foscam
Foscam
Foscam G4C Manual de usuario
Foscam
Foscam SD2X Manual de usuario
Foscam
Foscam X5 Manual de usuario
Foscam
Foscam FI9928P Manual de usuario
Foscam
Foscam FI9821W V2 Manual de usuario
Foscam
Foscam HUNTVISION P2 Manual de usuario
Foscam
Foscam HD Wireless IP Camera Manual de usuario
Foscam
Foscam FI8910W Manual de usuario
Foscam
Foscam FI9853EP Manual de usuario
Foscam
Foscam FI9962EP Manual de usuario
Foscam
Foscam SD4 Manual de usuario
Foscam
Foscam FI8620 Manual de usuario
Foscam
Foscam V4EC Manual de usuario
Foscam
Foscam FI9961EP Manual de usuario
Foscam
Foscam FI8905E Manual de usuario
Foscam
Foscam FI8904W Manual de usuario
Foscam
Foscam G4 Manual de usuario
Foscam
Foscam FI8910W Manual de usuario
Foscam
Foscam FI8919W Manual de usuario
Foscam
Foscam FI9903P Manual de usuario
