Foscam 305503000601 Manual de usuario
Security Camera
V1.1
305503000601
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
Dear customer,
The user manual for the product contains the product functions, method of use and
operating procedure. Read the user manual carefully to get the best experience and
avoid unnecessary damage. Keep the manual for future reference.
WARNING
Do not use the product in violation of local laws and regulations. A user who violates
local laws and ordinances will be held responsible for all consequences of purchasing
and using the product.
Alza.cz a.s. is not responsible for any violation of local laws and regulations by the user.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
3
Setting Up Your Foscam Security Camera
1. Getting Started
Package Contents
IP Camera Ethernet Cable Power Adapter
Quick Setup Guide Expansion Screws Ethernet port waterproof kit
Security tips
•Please change the camera’s password regularly, using a combination of numbers,
letters and special characters.
•We recommended that you regularly update your camera with latest available
software and firmware to ensure the best experience with your camera.
2. Physical Description
LENS
Spotlight
LAN
Light Sensor
Power
Spotlight
Micro SD Card Slot
Microphone
Reset
Speaker
LED Indicator
Passive infrared
motion sensor
4
3. Setting Up Your Camera: Connection via Foscam App
Before you get started
Scan the QR code below to download and install the Foscam APP:
To ensure a smoother video experience on your smart phone, it is recommended that
you smart phone meet the following specifications:
•iOS: version 11 or higher.
•Android: 4.1 or higher, using a device with Graphics Processing Unit (GPU)
NOTE: For the best experience, please update the APP to the latest version!
Wi-Fi Connection
1. Plug the power adapter into the camera, and please wait for a few seconds until
hearing the “Ready for Wi-Fi configuration”.
2. Make sure your smart phone is connected to the same Wi-Fi network as the camera.
TIPS: The camera supports dual-band 2.4GHz and 5GHz Wi-Fi networks, so you can
choose the channel with the stronger signal to use. For example SSID: XXXXX_2.4G or
XXXXX_5G.
3. Open the foscam APP and please register a Foscam account, or sign in if you have one
already.
5
4. After logging into Foscam APP, select “Tap to add a camera” or “+” icon on the upper
right corner, then select “Scan the QR code” and scan the QR code that labeled at the
bottom of your camera.
Tap + icon select “Scan the code” Scan the QR code
which is located at the
bottom of your camera.
5. In “Add Device”, if you hear “Hello Foscam”, select the checkbox and tap “Next”,
continue to confirm that the device is in the blue flashing state and tap “Next”. In “Wi-Fi
connection”, enters your Wi-Fi’s password and tap “Confirm”.
6. Please scan the QR code on the doorbell with the smart phone camera, then you will
hear a voice prompt say “Wi-Fi connecting”. Select the checkbox and tap “Next”.
Heard „Hello Focam!
And tap „Next“
Confirm device
flashes blue
Enter you Wi-Fi
password and tap
„Confirm“
6
TIPS: Please place the QR code on the phone screen about 10-15cm (3.94 to 5.9in) away,
and if you encounter difficulties you can try to move the screen slowly around 10-15cm
(3.94 to 5.9in).
7. Wait a few seconds until the camera notifies you that the “Wireless connection
succeeded” which means your camera has connected to your Wi-Fi successfully. After,
you can set the camera name and tap “Save” in “Set name” interface.
NOTE: If the adding process fails, please reset your camera and try adding according to
the above method.
Reset
8. Tapping on the play button in the video box will jump to the “Camera Login” setting
interface. For your security, please set a new username and password for your camera
before viewing live video.
Tap Set a new username
and password
Camera added
successfully and
name has been set
7
9. After completing the above steps, you can begin using your camera.
4. Other ways to access your camera
•Foscam VMS
Foscam VMS is a new tool for PCs. It does not require plug-in and is compatible with
Windows & Mac, supporting all Foscam HD cameras and up to 36 cameras at the same
time. If you would like to manage multiple cameras, we suggest you install Foscam VMS.
You can download the “Foscam VMS” Windows version from foscam.com/vms, and can
download the “Foscam VMS” Mac version from the APP store:
https://apps.apple.com/cn/app/foscamvms/id1521202507?mt=12.
NOTE: For the best experience, please update Foscam VMS to the latest version!
Add the IP Camera
1. Run Foscam VMS, then create a local administrator account and login.
2. Tap the “+” icon on the Foscam VMS and follow the setup wizard to add your camera.
Please visit foscam.com/downloads to view the user manual and for additional detailed
steps.
8
5. Hardware Installation
Point the camera at the desired location and use the screws provided to mount it.
For the best product experience, we suggested installation height of Spotlight camera
2.2m (7.22 feet), camera downward tilt angle 30°.
Please Note:
Ensure that rain or water will not reach the connector ports at the end of the pig tail
wiring. These connectors are not weather-resistant.
6. Important Notice
•Camera Username & Password
The camera username & password are used to access and manage your camera. Having
a strong can significantly improve the security of your camera.
If you have forgotten either of them, please press the “Reset” button and hold it for
more than 10 seconds while the camera is powered on. After release the button. The
camera will automatically reboot and the default settings will be restored.
You can then reconnect the camera by following this Quick Setup Guide.
9
•Foscam Cloud Service Account Username & Password
Your Foscam Cloud service account and password may be used to access both the
Foscam App and then Foscam Cloud service website. Therefore, you can register your
account username & password on either one.
•Storage Media
You camera supports cloud, NVR (Network Video Recorder), and Micro SD card (only
supports FAT-32 format) storage formats. If you wish to record and play back large
amounts of video, we recommend using a Foscam NVR device as well.
•Firmware Upgrade
You can upgrade the firmware of your camera with the Foscam App by using the new
“One-Key Online Upgrade” feature (Open the Foscam App and Login to the camera,
select Settings > Firmware Upgrade).
You also can download the latest version to upgrade your camera from our official
website foscam.com/upgrades.
•Safety Tips
Please ensure that the proper power supply is used before using the camera.
Please install the camera securely using the screw provided.
Please use this product within the temperature range. When the ambient temperature is
too high or too low, it may cause product failure.
To avoid the risk of fire or electric shock, please keep your camera connectors in a cool,
dry place.
Please keep the camera out of reach of small children.
This product is not a toy; children should use the product under adult supervision.
Change your default port to a greater range to help ensure the safety of your
connection. How to change the default port: please visit foscam.com/downloads to view
the user manual.
Check the logs of your Foscam cameras frequently. Foscam Cameras have embedded
logs reminding telling you which IP addresses are accessing the camera.
The cords on this product are a potential strangulation hazard for child safety; please
keep these cords out of the reach of children.
10
7. Product Performance
WLAN frequency range: 2412MHz –2472MHz and 5725MHz –5850MHz
Maximum transmission power: < 16dBm
Wireless Standard: IEEE802.11b/g/n (2.4GHz)
IEEE802.11a/n/ac (5GHz)
Power supply: DC 12V 1.0A 12W
8. Technical Support
If you have problems with your Foscam device, please contact the reseller you
purchased from, or you can e-mail the headquarters technical support team:
support@foscam.com.
Your valuable comments and suggestions on improving Foscam products are welcomed!
Tabla de contenidos
Idiomas:
Otros manuales de Cámara de seguridad de Foscam
Foscam
Foscam FI9816P Manual de usuario
Foscam
Foscam FI8918W Instrucciones de funcionamiento y mantenimiento
Foscam
Foscam FI9938B Manual de usuario
Foscam
Foscam R4 Manual de usuario
Foscam
Foscam F41/FLC Manual de usuario
Foscam
Foscam E1 Manual de usuario
Foscam
Foscam FLC/F41 Manual de usuario
Foscam
Foscam FLC/F41 Manual de usuario
Foscam
Foscam FI9803P V2 Manual de usuario
Foscam
Foscam FN3108XE-B4-1T Manual de usuario
Foscam
Foscam FI8905E Manual de usuario
Foscam
Foscam FI8916W Manual de usuario
Foscam
Foscam FI9900P Manual de usuario
Foscam
Foscam FI8910W Manual de usuario
Foscam
Foscam FI8919W Manual de usuario
Foscam
Foscam QJ4 G2EP G4EP FI9912EP Manual de usuario
Foscam
Foscam C2M Manual de usuario
Foscam
Foscam FI9831P V2 Manual de usuario
Foscam
Foscam X5 Manual de usuario
Foscam
Foscam FN9108E-T4 Manual de usuario
