Fortress Technologies S1 Manual de usuario

S1 GSM WiFi Security System

Version 1 - Jun 2018

Table of Contents

Introduction

Self Monitoring

GSM SIM Card and WiFi

Free Mobile App (iPhone / Android)

Pre-Programmed Accessories

Support Resources

The Main Panel

Main Panel Features

Main Panel Operation

Status Light

Voice Prompts

Arming, Disarming, and Triggering the Alarm

First-Time Setup

Take Notes

Test the Accessories

Install the Equipment

Download the Mobile App

Connecting / Activating a SIM Card

Connecting to WiFi - Mobile App

Remote Notifications

Change Optional Settings

Using the System 17

Phone Controls

Adding/Removing Contact Phone Numbers

Controlling the System Over the Phone

Working With Accessories

Remote Key Fobs

Wireless Sensors / Detectors

Secondary RFID Keypad

RFID Key Tags

Wireless Sirens

Smart Outlets

Technical Specifications

Troubleshooting

Contacting Customer Support

Power Cycling the Main Panel

Changing Accessory Batteries

Checking Placement of Sensors

Performing a Factory Reset

Space For Notes

Phone Controls (continued)

Only Contacts Can Call / Text the Main Panel

Recording Your Custom Message

Central Monitoring (Contact ID)

Auto Arm / Disarm

Delays - Entry & Exit Delay

Panel Settings

Arm / Disarm SMS

Power / Battery Notices

Siren Time & Ring Count

Volume Settings

Disconnecting from WiFi

Table of Contents

(continued)

Introduction

Welcome to the S1 GSM WiFi Security System from For-

tress Security Store! We’ll highlight some of the features of

your new system here. You can browse through the Table

of Contents at the beginning of this user manual to quick-

ly nd answers to any questions you may have about your

system.

Self Monitoring

is security system can be self-monitored through your

existing WiFi and Internet connection, or by using a GSM

SIM card to connect to nearby cellular towers. Over WiFi

you can receive email and push notications. With the SIM

card, the system can alert you via call and/or text.

GSM SIM Card and WiFi

You can connect your S1 main panel to any 2.4GHz WiFi

signal that you have access to. You can also use a GSM SIM

card so the system can place calls over a cellular tower, with

no Internet required. You can also use both, and they will

back each other up in case one connection is interrupted.

If you’re using the system in the US, you can activate the

SIM card that comes with your system! In your box you’ll

nd a SIM card activation code, and instructions for how

to activate.

Free Mobile App (iPhone / Android)

Download the free mobile app

My Fortress

(Apple App Store / Google Play Store) Download the app!

Pre-programmed Accessories

e system works with wireless accessories, and all of

the accessories that come with your system have been

pre-programmed by our technicians so that you can start

using your system right away! If you add accessories later,

programming them to the system is quick and easy as well.

Support Resources

Check out www.FortressSecurityStore.com to nd more

helpful resources for your system, including:

• How-To Videos

• User Manual (digital copy)

• Programming Instructions

• Frequently Asked Questions

• Customer Support

If you have a question that isn’t answered in our support

resources online, our Customer Support team is available

seven days per week to assist you!

We can be reached...

• by Live Chat online,

• by email at support@fortresssecuritystore.com, or

• by phone at +1 (206) 981-5371.

The Main Panel

In this section we’ll introduce you to the S1 GSM WiFi main

panel. is main panel is a hub for your accessories. e

alarm is armed or disarmed through this main panel, and

you can also change settings in the main panel by using the

mobile app, or the buttons on the panel itself. Don’t worry,

the panel includes a built-in backup battery that will last

for 6-8 hours in the event of a power outage, as well.

Main Panel Features

e S1 GSM WiFi main panel is able to act as a stand-alone

local alarm with wireless accessories. It is also able to act as

a self-monitored system when connected through an ex-

isting WiFi signal and/or a GSM SIM card. e system is

also compatible with Contact ID central monitoring com-

panies (with active SIM card required).

e Fortress wireless accessories use a 433MHz radio sig-

nal to communicate with the main panel. ese accessories

have a range of about 150 feet from the main panel. Keep

in mind that the 433MHz radio signal will be blocked by

brick walls, concrete walls, metal sheets, and other dense

materials. Line of sight is best for wireless communications,

but regular drywall should not block the signal. We also

have optional Fortress wireless signal repeaters available

for sale. ese signal repeaters will re-broadcast signals

that they receive at a higher strength, which can eectively

increase the range of the system by another 200 to 400 feet.

Signals and Communication

Buttons and Ports

e buttons and ports on the S1 GSM WiFi main panel are

labeled as shown.

Central Button

e Central Button is used to arm the system (in

both Away Mode and Home Mode), and disarm

the system. If the alarm has been triggered, then

you can press and hold this button for 10 seconds to

disarm the system. When the system is disarmed,

press and hold this button to trigger the SOS.

WiFi Button

e WiFi Button is used to connect the S1 main

panel to your existing WiFi signal while using the

free “My Fortress” mobile app. Press and hold the

button for 3 seconds to enter “Smart Cong Mode.”

Quickly press and release the button again aer

that to enter “AP Cong Mode.” More information

about these conguration modes can be found in

the “Connecting to WiFi” section of this manual.

Set Button

e Set Button is used for a number of dierent

functions including adding and removing sensors,

remote controls, RFID key tags, and more. is

manual will refer to the Set Button in later sections.

Power Button

e Power Button will turn the power on and o

for the panel when the power cable is unplugged.

Press and hold this button for 3 seconds to turn the

panel on or o.

Tabla de contenidos

Otros manuales de Sistema de seguridad de Fortress Technologies

Fortress Technologies

Fortress Technologies S03 Manual de usuario

Fortress Technologies

Fortress Technologies Ani Wi-Fi Manual de usuario

Fortress Technologies

Fortress Technologies ES820 Instrucciones de instalación

Fortress Technologies

Fortress Technologies S6 Titan Manual de usuario

Fortress Technologies

Fortress Technologies Safeguard KR-D2 Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario