Fortinet FortiWLC 3000D Manual de usuario
QuickStart Guide
FortiWLC 3000D
October 26, 2018
3rd Edition
Copyright© 2018 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare®
and FortiGuard®, and certain other marks are registered trademarks of Fortinet,
Inc., in the U.S. and other jurisdictions, and other Fortinet names herein may also
be registered and/or common law trademarks of Fortinet. All other product or
company names may be trademarks of their respective owners. Performance and
other metrics contained herein were attained in internal lab tests under ideal
conditions, and actual performance and other results may vary. Network variables,
dierent network environments and other conditions may aect performance
results. Nothing herein represents any binding commitment by Fortinet, and
Fortinet disclaims all warranties, whether express or implied, except to the extent
Fortinet enters a binding written contract, signed by Fortinet’s General Counsel,
with a purchaser that expressly warrants that the identied product will perform
according to certain expressly-identied performance metrics and, in such event,
only the specic performance metrics expressly identied in such binding written
contract shall be binding on Fortinet. For absolute clarity, any such warranty will
be limited to performance in the same ideal conditions as in Fortinet’s internal
lab tests. In no event does Fortinet make any commitment related to future
deliverables, features or development, and circumstances may change such that
any forward-looking statements herein are not accurate. Fortinet disclaims in full
any covenants, representations, and guarantees pursuant hereto, whether express
or implied. Fortinet reserves the right to change, modify, transfer, or otherwise
revise this publication without notice, and the most current version of the
publication shall be applicable.
QuickStart Guide
Register for Support
Register your Fortinet product to receive:
• Technical Support
• New product features
• Protection from new threats
Vous devez enregistrer le produit pour recevoir:
• Support technique
• Nouvelles fonctionnalitées du produit
• Protection contre de nouvelles menaces
La reistrazione ti permette di usufruire di:
• Supporto Tecnico
• Nuove funzionalita
• Proteezione dalle ultime minaccce
Debe registrar el producto para recibir:
• Apoyo técnico
• Nuevas funcionalidades del producto
• Protección contra ataques
登録のお願い
本日、フォーティネット製品の登録をしてください。
登録すると次のメリットがあります。
テクニカルサポート • 新機能の追加 • 新しい脅威への防御
请马上注册
您的飞塔产品
您在注册以后才能得到技术支持、新产品特点信息、最新威胁防护
https://support.fortinet.com
Toll free: 1 866 648 4638
Phone: 1 408 486 7899
Fax: 1 408 235 7737
Email: register@fortinet.com
Box Includes
2
FortiWLC 3000D
Ethernet Cable
Console Cable
2 Power Cables
QuickStart Guide
QuickStart Guide
FortiWLC 3000D
4 Rubber Feet
Rail Mount Kit
4 Bracket Screws 2 HDD tray keys26 Rail Mount
Screws
33
1Basic Connections
Connect your device to a power outlet and to switch with an SFP+ Port (ports 1-8).
SFP+ Port
Power Connection
Switch
Typical Deployment Setup
4
Terminal Emulation with Console
Cable
To Connect to the CLI
1. Connect the FortiWLC unit console port to the management computer using the
provided console cable.
2. Start a terminal emulation program on the management computer. Select the COM
port and use the following settings:
Baud Rate: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: None
3. Press Enter on your keyboard to connect to the CLI.
4. Login using username“admin” and password “admin”. You can now proceed with
conguring your FortiWLC unit.
Get started by typing “?” for a list of available commands.
Begin typing a command and type “?” for a list of available ways to complete.
For example “cong ?” shows the lowest level of conguration options.
For a detailed guide, visit http://docs.fortinet.com/wireless-infrastructure/reference.
B
Console Port
Serial Port
5
Hardware
The FortiWLC unit can be mounted in any standard 19 inch rack unit with the provided
rail mount kit.
Please read the“Cautions and Warnings” on page 20 prior to installing your device.
To install the FortiWLC unit into a rack:
1. Ensure that the FortiWLC unit is placed on a stable surface prior to rack-mount
installation.
2. Assemble the rails and install the system in the rack following the safety instructions
and the rack installation instructions in Rail Installation (p. 8).
3. Verify that the spacing around the FortiWLC unit conforms to requirements and that
the unit is level.
4. Connect the provided power cables to the system.
5. Plug the other end of the power cables into separate power sources, such as
uninterruptible power supplies (UPS) or power distribution units (PDU).
6. Insert one end of the provided Ethernet cable into one of the Ethernet ports on the
FortiWLC unit. Insert the other end to a router or switch that is connected to the
Internet.
7. Press the power button on the system to turn on the device.
Do not place heavy objects on the unit.
General Installation
3
Installation
66
Software
IMPORTANT: FortiWLC-3000D is supported from FortiWLC-SD 8.3 and above. This
controller requires fresh installation and cannot be upgraded from older FortiWLC-SD
releases.
To install release 8.3 in the new controllers, use the following instructions:
Upgrading via CLI
Use the show images command to view the available images in the controller. By
default, the new controller boots from the primary partition with the running image.
NOTE: The new controllers have two logical partitions, and the default image is
available in both the partitions.
default(15)# sh images
Running image: Primary <-- denotes the current partition
---------------------------------------------------------------
Running image details.
System version: 0.0.7
System hash: e9efe2c7ab0d10da660cad019d333f8d7772d6f1
System branch: master
System built: 20161115072723
System memory: 114M/463M <-- Shows the available/total memory
Apps version: 8.3-48
Apps size: 303M/850M
----------------------------------------------------------------
Other image details.
System version: 0.0.7
System hash: e9efe2c7ab0d10da660cad019d333f8d7772d6f1
System branch: master
System built: 20161115072723
System memory: 150M/473M
Apps version: False
Apps size: 662M/849M
General Installation
3
7
Installation
To install the latest release, download the release image using the upgrade-image
command (mandatory keywords are marked in red color):
upgrade-image scp://<username>@<remote-server-ip>:<path-to-
image>/<image-name>-rpm.tar both reboot
image-name for FortiWLC: forti-{release-version}-{hardware-model}-rpm.tar.
Eg,: forti-8.3-0-FWC3KD-rpm.tar
The above command will upgrade the secondary partition and the controller will reboot
to secondary partition.
default(15)# sh images
Running image: Secondary <-- Current partition after the upgrade.
-------------------------------------------------------------------
Running image details.
System version: 0.0.7
System hash: e9efe2c7ab0d10da660cad019d333f8d7772d6f1
System branch: master
System built: 20161115072723
System memory: 150M/473M
Apps version: 8.3-0build-47
Apps size: 230M/849M
--------------------------------------------------------------------
Other image details.
System version: 0.0.7
System hash: e9efe2c7ab0d10da660cad019d333f8d7772d6f1
System branch: master
System built: 20161115072723
System memory: 116M/463M
Apps version: 8.3-0build-46
Apps size: 298M/850M
NOTE: After an upgrade the current partition becomes the second partition. For
example, if you started upgrade in primary partition, post upgrade the default
partition becomes secondary partition and vice- versa.
88
Upgrading via WebUI
In the FortiWLC-SD WebUI, navigate to Maintenance > File Management > SD Version.
Click the Import button to choose the image le.
After the import is complete, the following message is displayed.
Now, from the CLI run the upgrade commands to complete the upgrade process.
Switching Partitions
To switch partitions, select the partition during the bootup process.
Otros manuales de Sistema de seguridad de Fortinet
Fortinet
Fortinet FortiGate-5001D Manual de usuario
Fortinet
Fortinet FortiDB Series Manual de usuario
Fortinet
Fortinet FortiCarrier-5001A-DW Manual de usuario
Fortinet
Fortinet FortiGate-5000 Manual de uso y cuidado
Fortinet
Fortinet FortiGate-5001C Manual de usuario
Fortinet
Fortinet FortiSwitch-5203B Manual de usuario
Fortinet
Fortinet FortiManager-400A Manual de usuario
Fortinet
Fortinet FortiManager-400 Manual de usuario
Fortinet
Fortinet FortiGate-5001B Manual de usuario
Fortinet
Fortinet FortiAnalyzer-800B Manual de usuario
Manuales populares de Sistema de seguridad de otras marcas
EDM
EDM Solution 6+6 Wireless-AE Manual de usuario
Highway Safety Group
Highway Safety Group EA401 Manual de usuario
Siren
Siren LED GSM Manual de usuario
Detection Systems
Detection Systems 7090i Instrucciones de montaje
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manual de usuario
Siemens
Siemens FDM273 Manual de usuario